Meross MSS510 US - Smart Switch Manual

Package Contents

1 x Smart Wi-Fi switch
1 x User Manual
2 x Screw

Wiring Diagram

Open the Meross app, it will guide you through the wiring process.

Installation Guide

Before We Get Started

• Replace single pole switch. Not compatible with 3 way or 4 way switch.*
• Neutral wire (white wire) is required.
• Only supports 2.4GHz Wi-Fi networks.

*A 3 or 4 way switch is a light that is controlled by more than one switch.

1. Download the Meross app.
   

2. Set up the device.
   1. Make sure your smart device is covered by strong Wi-Fi signal.
   2. Launch the Meross app and log in to your account, or if you are a new user, tap Sign up to create a new account.
   3. Tap the "+" icon to select the type of smart device you want to add, then you can just follow the setup wizard to finish configuration.
      
   4. Relocation of the smart device does not require additional operations provided that it remains on the same network with strong Wi-Fi signal.

NOTE:

1. If this is not the first time you've added this smart device. you'll have to reset it before going any further
2. Find more at https://www.meross.com/support/,

LED and Button Rules

FAQ

At Meross, we strive to assure your satisfaction.
Attached below is a non-exhaustive list Of questions that users are mostly concerned about.

1. What should I do when I can't turn the wall switch on/off manually?
   Please check the Status LED. If it is Off:
   • Make sure that you restore power to the wall switch at the circuit breaker.
   • Make sure the wall switch is wired correctly. Please consult with a qualified electrician.
2. What should do when my Meross app is unable to control the added Wall Switch?
   Please check the following:
   • Check the main Wi-Fi's Internet connection.
   • Make sure that main Wi-Fi's password hasn't been changed.
   • Do not use a metal faceplate with the wall switch as that will decrease the Wi-Fi signal.
   • Short press the reboot button to reboot device. Device will reconnect automatically, no extra configuration needed.

If it doesn't work, please factory reset MSS510 and try to add it again.

To learn more, you can visit https://www.meross.com/support/faqs to find solutions for more frequently asked questions.

Link the Device to Google Assistant or Amazon Alexa

Set up the device in the Meross app and link it to the voice assistants.

Link to Amazon Alexa
Go to Account-> Amazon Alexa and allow Meross to link with Alexa.
Link to Google Assistant
Go to Account-> Google Assistant and follow the step-by-step instructions to complete the linking process.

Safety Information

RISK OF ELECTRIC SHOCK OR FIRE.

• Make sure the power is OFF at the circuit breaker controlling the wall switch you are replacing.
• The wall switch must be installed and used in accordance with the National Electric Code (NEC) or your local electrical code. If you are unfamiliar with these codes, or feel uncomfortable performing the installation, please call a qualified electrician.
• Do not install the wall switch with wet hands or when standing on wet or damp surfaces.
• The wall switch is for North America only. Max 400W INC bulb, 150W CFL or LED bulb.
• For your safety, do NOT use metal faceplate with this switch.

Email: support@meross.com
Website: www.meross.com

Manufacturer: Chengdu Meross Technology co. Ltd
Address: No 1312, Building E6-1. Tianfu Software Park, Chengdu, China

Documents / Resources

References

• Support - Meross Smart Home
• Meross Offical Site, Smart House and Home Automation Device Provider.
• Meross Offical Site, Smart House and Home Automation Device Provider.
• App Store - Apple
• Google Play
• Support - Meross Smart Home

Download manual

Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.

Download Meross MSS510 US - Smart Switch Manual