Meross MDL110 - Smart Light Manual

Package Contents

Lamp Size

Installation Guide

1. Download the Meross app.
   
   
   
   
   
2. Connect power cable and power the device up.
   

3. Set up the device.
   
   1. Connect your smartphone or tablet to a 2.4 GHz Wi-Fi network.
   2. Make sure your smart device is covered by strong Wi-Fi signal.
   3. The smart device supports iOS 13/ iPadOS 13and later. It is recommended that you upgrade your iOS or iPadOS to the latest version before pairing with the smart device.
   4. Launch the Meross app and log in to your account, or if you are a new user, tap Sign up to create a new account.
   5. Tap the "+" icon to select the type of smart device you want to add, then you can just follow the setup wizard to finish configuration.
   6. Relocation of the smart device does not require additional operations provided that it remains on the same network with strong Wi-Fi signal.

NOTE:

1. If this is not the first time you've added this smart device, you'll have to reset it before going any further.
2. As long as you finish configuration, you'll be able to manage the device in Apple Home app.
3. If the QR code does not work, please try to add the smart device in Apple Home app.
4. Find more at https://www.meross.com/support.

LED and Button Rules

1. Main Light
   Blinking 3 times: Initialization process finished, entering into configuration mode. Blinking smoothly from warm to white: Successfully connected.
2. Power Button
   Short press to turn on/off the light.
3. Mode Button
   Short press to change color temperature. Hold for 5 seconds to reset device.
4. Brightness Button
   " + " Brighten the light. Dim the light.

How to Use

Link Meross to Google Assistant or Amazon Alexa

Set up the device in the Meross app and link it to the voice assistants.

Link to Amazon Alexa
Go to Account-> Amazon Alexa and allow Meross to link with Alexa.

Link to Google Assistant
Go to Account-> Amazon Alexa and allow Meross to link with Google Assistant.

Amazon Alexa

The example commands are as follows:
-"Alexa, set the smart desk lamp warmer."
-"Alexa, dim smart desk lamp by 30%."

Google Assistant:

The example commands are as follows:
-"Hey Google, brighten smart desk lamp."
-"Hey Google, set the smart desk lamp to cool white."

HomeKit Siri:

The example commands are as follows:
-"Hey Siri, brighten smart desk lamp."
-"Hey Siri, set the smart desk lamp to cool white."
-"Hey Siri, dim smart desk lamp by 30%."

Widgets

Widgets are the quick access to your Meross devices and Scenes. To enable it, please go to Account -> Widget to add shortcuts first. And then follow below steps on your smartphones to activate them.

For iPhones:

1. Swipe to the right on your Home or Lock screen.
2. Scroll down to the bottom of your widget list and then tap edit.
3. Scroll down to find Meross and add it.

For Android smartphones:

1. On the home screen, tap and hold on an available space.
2. Tap Widgets, find Meross widget and then add it.

FAQ

At Meross, we strive to assure your satisfaction. Attached below is a non-exhaustive list of questions that users are mostly concerned about.

1. How do I reset my Meross Smart Desk Lamp?
   Hold the mode button for 5 seconds, it will reset and enter Wi-Fi configuration mode. Note that factory reset will erase all of your custom settings, and you'll have to set it up again.
2. What if I can't control the smart device with the Meross app?
   You can troubleshoot the following:
   • Check if your home Wi-Fi is working properly.
   • Make sure that you have disabled access control in your router and that the smart device is not blocked by the router's firmware.
   • Factory reset your smart device and try to add it again.
3. How do I pair my Meross devices with Amazon Alexa or Google Assistant?
   Visit Account->Amazon Alexa or Google Assistant page within Meross app for pairing instructions.
4. My Home app can't add the device by scanning the QR code.
   You can tap "Don't Have a Code or Can't Scan" and input the code manually.
5. I can't pair my device with HomeKit anyhow.
   Please make sure your iOS is connecting to the 2.4GHz of your home Wi-Fi and you are having iOS13 or above. Restart your iOS will help due to some system cache issue.

Safety Information

• Place on flat or secure surface.
• ONLY use the supplied AC power adapter.
• Please do not disassemble the device, otherwise there may be product damage or security risks.
• Keep the lamp dry and clean.
• Avoid any extreme heat sources or direct sunlight.
• Don't touch electrical parts with wet hands.
• Operating frequency / max output power: 2400MHz-2483.5MHz / 20dBm.

Documents / Resources

References

• App Store - Apple
• Google Play
• Support - Meross Smart Home

Download manual

Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.

Download Meross MDL110 - Smart Light Manual