Download Print this page

SEVERIN AS 3948 Manual page 4

Multi-use slicer

Advertisement

and before cleaning the appliance.
After switching off, always wait until the
blade has come to a complete standstill.
Bring the stop plate back to its rest (zero)
position, so that the blade does not
protrude.
To avoid the risk of electric shock, do not
clean the appliance with water and do
not immerse it in water.
Do not use abrasives or harsh cleaning
solutions for cleaning. If necessary, the
housing may be wiped with a slightly
damp, lint-free cloth. The end piece
holder can be cleaned using hot water
and a mild detergent (do not put it in a
dish-washer).
Detaching and cleaning the blade
The blade is extremely sharp - there is a
risk of serious injury if proper care is not
taken.
The stainless-steel blade can be cleaned with
a slightly damp, lint-free cloth.
The area behind the blade should also be
cleaned occasionally. To remove the blade,
loosen the central fixing screw by turning it
90° in a clockwise direction.
After cleaning, re-attach the blade following
the same steps in reverse order.
Detaching the stop plate
For thorough cleaning, the stop plate can be
removed. Turn the selection knob anti-
clockwise until the stop plate can be pulled
out sideways. When refitting the stop plate,
follow the same steps in reverse order.
Detaching the base plate
The base plate can be removed for cleaning
To facilitate correct fitting, the base plate has
guide studs on both sides. Once the plate is
brought into a vertical position, the studs can
be pulled out of their guide slots and the
plate can be taken off sideways. The plate
may be cleaned with hot water and a mild
detergent. When refitting the plate, follow
the same steps in reverse order.
Disposal
Do not dispose of old or defective
appliances in domestic garbage;
this should only be done through
public collection points.
Guarantee
This product is guaranteed against defects in
materials and workmanship for a period of
two years from the date of purchase. Under
this guarantee the manufacturer undertakes
to repair or replace any parts found to be
defective, providing the product is returned
to one of our authorised service centres. This
guarantee is only valid if the appliance has
been used in accordance with the
instructions, and provided that it has not
been modified, repaired or interfered with
by any unauthorised person, or damaged
through misuse.
This guarantee naturally does not cover
wear and tear, nor breakables such as glass
and ceramic items, bulbs etc. If the product
fails to operate and needs to be returned,
pack it carefully, enclosing your name and
address and the reason for return. If within
the guarantee period, please also provide the
guarantee card and proof of purchase.
6

Advertisement

loading

This manual is also suitable for:

3948