Table of Contents
Advertisement
Precaution for display mounting
VESA compliant mounting bracket for the display (M8 screw)
Please pay attention to the following items when using the screw holes on the back of the display.
1)
Please use 4 mounting screws to fix the display.
2)
Please use screws with correct length as described in the operation manual of the display. Display may drop with a long screw.
3)
Please take proper countermeasures to prevent the screws from becoming loose (for example : using screws with a split lock washer).
4)
Please tighten the screws to approximately 3Nm torque.
※ Do not use an impact driver.
Please mount the displays onto the mounting bracket recommended by SHARP.
Read carefully the notes described in the instruction manual of each option.
Sharp NEC Display Solutions Europe GmbH
11
Advertisement
Table of Contents
Need help?
Do you have a question about the InGlass LA Series and is the answer not in the manual?