Specifications - Realistic TRC-221 Owner's Manual

SPECIFICATIONS
INTERFEFIENCE TO OTHER
APPLIANCES
Your CB might cause TV or radio inter-
ference even when it is operating
properly. To determine whether your
CB is causing the interference, turn off
your CB. If the interference goes away
your CB is causing the interference. Try
to eliminate the interference by:
• Moving your CB away from the
receiver.
• Contacting your local Padio Shack
store for help.
If you cannot eliminate the interference,
the FCC requires that you stop using
your CB.
12
RECEIVEF}
Frequency Coverage
Sensitivity
Selectivity
Adjacent Channel Pejection
26.965 to 27.405 MHz
0.5 mv for 10 dB (S + N)/N
+/-3 kHz at no dB
Audio Distortion at 1 kHz ............................. Less than 10% at 2 watts output (8 ohm)
I ntermediate Frequency:
10.695 MHz
455 kHz
Adjustable from 1 /tv
TRANSMITTEPI
Frequency Coverage
Power Input:
HIGH Position
LOW Position
Power Output:
HIGH Position
LOW Position
Modulation
Spurious Output
Type of Emission
FrequencyTolerance
GENERAL
Power Plequirements
Speaker
Microphone
External Mic Jack
(
26.965 to 27.405 MHz
4.0 watts
2.0 watts
9 0 °/o t o 1 0 0 0/o
rf50 dB or better
0.0020/o
12 volts DC
2 inch (5 cm) permanent magnet dynamic type
Built-in electret-condenser type with FET amplifier
5-pin DIN type
13