Software Upgrading, Error Code And Set Option Code - Philips 55PML9008/12 Service Manual

5. Software Upgrading, Error code and Panel Code
5.1 Software Upgrading
5.1.1. The following update is for .pkg file.
1. Rename the file to "upgrade_loader.pkg".
2. Prepare a USB memory (File format: FAT32, Size: 4G~8G).
3. Copy the software to USB flash disk (root directory).
4. Switch off the TV and Insert the USB memory stick that contains the software update files in one of the TV's USB 2.0 port.
Note: It contains USB3.0 port, if connect on it, the software may can't be detected.
5. Switch on the TV. The TV will detect the USB memory s tick automatically. Then a window jumps out as below:
6. When the TV software is updated, the TV will turn on again automatically. Remove your USB flash drive.
7. We can enter in CSM or Factory mode to check the current software version.
5.1.2. The following update is for .upg file.
Step 1: Ready for F/W Upgrade
1. Rename the file to "autorun.upg".
2. Prepare a USB memory (File format: FAT32, Size: 4G~8G).
3. Copy the software to USB flash disk (root directory).
4. Switch on the TV and Insert the USB memory stick that contains the software update files in one of the TV's USB 2.0 port.
Note the version of this F/W before you change the software file name.