Hyundai power products HTRTPRO5350-4-1 Original Instructions Manual
  1. Manuals
  2. Brands
  3. Hyundai power products Manuals
  4. Chainsaw
  5. HTRTPRO5350-4-1
  6. Original instructions manual

Hyundai power products HTRTPRO5350-4-1 Original Instructions Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
PETROL CHAIN SAW
HTRTPRO5350-4-1
WARNING: Read thoroughly the instruction manual before using.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the HTRTPRO5350-4-1 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Hyundai power products HTRTPRO5350-4-1

Summary of Contents for Hyundai power products HTRTPRO5350-4-1

  • Page 1 PETROL CHAIN SAW HTRTPRO5350-4-1 WARNING: Read thoroughly the instruction manual before using.

  • Page 2: Table Of Contents

    CONTENTS 1. SAFETY INSTRUCTIONS........................3 2. YOUR PRODUCT........................... 8 3. ASSEMBLY............................. 9 4. FILLING THE FUEL TANK AND OIL TANK................... 10 5. OPERATION............................12 6. MAINTENANCE AND STORAGE..................... 16 7. DECLARATION OF CONFORMITY....................19 8. WARRANTY............................20 9. PRODUCT FAILURE........................... 21 10. WARRANTY EXCLUSIONS......................22...

  • Page 3: Safety Instructions

    1. SAFETY INSTRUCTIONS  WARNING! When using this type of garden tool, basic precautions should always be followed to reduce the risk of fire, electric shock and injury.  Read all instructions carefully before attempting to use this product and retain these instructions.
  • Page 4 accessories.  Always inspect the machine before and after operation. If the tool is damaged or faulty, stop using the tool and bring it to an authorized service for inspection and repair.  Turn off the tool after use, when you leave it unattended, when changing these accessories and before servicing.
  • Page 5  Hold the chainsaw by inverting your hands increases the risk of personal injury and should never be used.  For the chainsaw designed with the chain guide on the left side, the reference to the "right hand" and "left hand" positions is reversed. ...
  • Page 6  Allow the machine to cool before performing inspection, adjustments, maintenance, servicing and storage.  Store the tool where fuel vapor will not reach a flame or spark.  When transporting and storing, always place on the guide bar the protector cover. CAUSES OF REBOUNDS AND PREVENTION BY OPERATOR ...
  • Page 7 EXPLANATION OF SYMBOLS Symbol warning of a warning. Read and refer to these operating instructions. Wear safety equipment that includes a helmet, protective helmet and protective goggles. The contact of the end of the bar with any object must be avoided. Do not operate the tool with one hand.

  • Page 8: Your Product

    Front handle Oil tank Fuel checker Air filter cover Guide bar cover Starter cable Mixing bottle b. Technical data Model HTRTPRO5350-4-1 Type of engine RY1E45F-1 (air cooled 2-stroke petrol engine) Fuel Tank Volume 550cm³ Ratio 40:1 Oil tank volume 260cm³...

  • Page 9: Assembly

    Maximum chain speed 21.2m/s Maximum engine power speed 8500/min Weight (empty tank, without 5.1 kg accessories) Cutting length 470mm (20’’) Chain pitch 8.255mm (0,325’’) Gauge of chain 1,47mm (0,058’’) Type of chain and guide bar BE20-76-5812P (Kangxin) and 325,058-76 (Kangxin) Sprocket (number of teeth x pitch) 7 teethes*8,255 Carburetor...

  • Page 10: Filling The Fuel Tank And Oil Tank

    9. Replace the protective cover so that the bolts go into the holes and the chain tension adjustment screw goes into the lower hole in the bar (use a flathead screwdriver to move the pin if necessary). 10. Install the two nuts, tighten them by hand, then follow the instructions to adjust the chain tension.
  • Page 11 WARNING! Before filling the oil tank, make sure that the chainsaw is turned off. 1. Be sure to clean the surface around the oil tank cap to prevent dirt from getting inside. 2. Unscrew the oil tank cap and pour in the chain saw oil. 3.

  • Page 12: Operation

    container. Do not leave the fuel for a long time in the product. The fuel may clog the carburetor and the engine will not operate properly. d) Disposal of fuel When the fuel is no longer used or worn, please dispose of it in an authorized location. Check local laws regarding disposal of fuels.
  • Page 13  Let the engine warm up.  When the engine starts, return the starter to its initial position. NOTE: If the engine stalls when starting, push the starter back to the first position and pull again. b. Stopping the engine Allow the chainsaw to run for a few minutes.
  • Page 14 Chain brake Starting shall always be done with the chain brake activated. The chain brake is a device that automatically stops the chain in case a backward movement occurs, causing the saw to jump. Normally, the brake is automatically activated by inertia force. It is also manually tightened by pushing the brake lever down and forward.
  • Page 15 Do not forget to fill the oil tank when filling the machine with fuel. f. Release of a jammed saw If the saw gets stuck during cutting, the operators should:  Saw the saw and attach it securely to the cutting foot of the shaft (i.e., trunk side) or has a separate chord from the tool.

  • Page 16: Maintenance And Storage

    l. Pruning a tree Begin pruning by nicking the tree from below and then finish at the top. 6. MAINTENANCE AND STORAGE 1. Maintenance Before any maintenance work, the machine must be switched off and completely cooled. Perform the maintenance work according to the instructions below and perform them regularly.
  • Page 17 d. Cleaning the oil filter and fuel filter Clean these items regularly. Remove them from the tanks using clamps. Clean them with gasoline and then put them back in place afterwards. e. Guide bar Cleaning: Remove bar guide to remove dirt from grooves and oil inlet. Regularly grease the pinion.
  • Page 18 h. Saw Check each time the cutter and cutting angles are as shown below. i. Sharpening of the chain For best performance, we strongly recommend that you periodically sharpen the chain. The chain can either be sharpened by a professional or by yourself by providing you with a sharpening guide (make sure you know how to use it).

  • Page 19: Declaration Of Conformity

    BUILDER SAS ZI, 32 rue Aristide Bergès – 31270 Cugnaux - France Declares that the machinery designated below: Petrol chainsaw HTRTPRO5350-4-1 Serial number: 20240310493-20240312092 Complies with the provisions of the Directive " machinery " 2006/42/EC and regulations. National transposing it.

  • Page 20: Warranty

    8. WARRANTY WARRANTY The manufacturer guarantees the product against defects in material and workmanship for a period of 2 years from the date of the original purchase. The warranty only applies if the product is for household use. The warranty does not cover breakdowns due to normal wear and tear. The manufacturer agrees to replace parts identified as defective by the designated distributor.

  • Page 21: Product Failure

    9. PRODUCT FAILURE WHAT TO DO IF MY MACHINE BREAKS DOWN? If you bought your product in a store: a) Empty the fuel tank if your product has one. b) Make sure that your machine is complete with all accessories supplied, and clean! If this is not the case, the repairer will refuse the machine.

  • Page 22: Warranty Exclusions

    10. WARRANTY EXCLUSIONS THE WARRANTY DOES NOT COVER: • Start-up and setting up of the product. • Damage resulting from normal wear and tear of the product. • Damage resulting from improper use of the product. • Damage resulting from assembly or start-up not in accordance with the user manual. •...

Table of Contents