Advertisement
3. Running DD PlayCam @live
a.
Connect the web camera to your computer
b.
Load the instant messenger software
c.
For using the DD PlayCam @live with your instant messenger
software, you need to go to the section of the camera setting in
your instant messenger software. Whatever the web camera uses
for the instant messenger, you have to change the device to
"DDPlayCam". The DD PlayCam @live then can work properly
with the instant messenger software.
d. Then you can start DD ThemeParty 2.0 and select one theme.
When you press the
transmission under the disabled status, the stream from DD
ThemeParty 2.0 will be sent to the virtual camera and then be sent
to the instant messenger software. At this time, the alternative
peer can see stream data you have transmitted in real time. DD
PlayCam @live 2.0 allows peer-to-peer transmission. Only if both
peers have installed DD ThemeParty 2.0 and DD PlayCam @live
2.0 virtual camera driver, stream data can be transmitted
synchronously by the same procedures to connect to other peers,
so that the alternative peer can see the process as you use the
software. If you want to stop the data transmission, just press the
button again on the interface of DD ThemeParty 2.0.
4. Running DD PrintCenter
a. Connect the web camera into the computer
b. Please go to the task bar and follow "Start"
button, the slash in the icon means data
Click "Program"
-16-
www.geniusnet.com
English
Advertisement
