Final Assembly .............................................................................................................................................................................................. 9
Commission and Testing ....................................................................................................................................................................... 12
Coaxial cables should not be bent sharply; they have a minimum bend radius which varies depending on the size of cable. Springer Spaniel Installation Instructions Page 2 of 12...
Required Tools & Accessories The following tools (not provided) are required in for the installation of the Springer Spaniel antenna: Philips Screwdriver • SMA Wrench • The tables below list the required accessories for the Bloodhound case antenna. Springer Spaniel •...
Page 4
Figure 1: Remove tape 2. Install the antenna cables to the Router as shown in Figure 2. Please see the Router Connections shown on Page 8: Figure 2: Connecting antenna cables to Router Springer Spaniel Installation Instructions Page 4 of 12...
Page 5
Figure 3: Figure 3: Router Orientation 4. Mount the router to the antenna plate using the Qty. 3: PTA0368-B Screws as shown in Figures 4-5: Figures 4-5: Mounting the router to the antenna Springer Spaniel Installation Instructions Page 5 of 12...
Page 6
5. Pass the power and/or RJ-45 cables through the slot in the Base and install the cables as shown in Figure 6: Figure 6: Passing cables through the slot 6. Install the base using the Qty. 14: PTA0071 screws as shown in Figure 7: Figure 7: Installing the base Springer Spaniel Installation Instructions Page 6 of 12...
Note: Ensure that the antenna cables are not excessively bent (1/2” minimum bend radius). Operational Setup Step 1: Place the antenna with the router on the bottom, as shown in Figure 10. Figure 10: Springer Spaniel Orientation Step 2: Power on the antenna. Step 3: Connect the antenna to a computer.
Page 10
B. Login to Cradlepoint NetCloud. The username is “admin”, and the password is found on the router, shown in Figure 16. Figure 11: Access Cradlepoint NetCloud. Figure 12: Cradlepoint NetCloud Login Password Springer Spaniel Installation Instructions Page 10 of 12...
Page 11
Figure 13: Select the device with a cellular SIM in Cradlepoint NetCloud. Antenna setup is complete! For best antenna performance, operate the antenna with the lid closed and the case oriented with the lip on top. Springer Spaniel Installation Instructions Page 11 of 12...
This document is for general information only. It cannot be used as a warranty. Parsec Technologies Inc. will not accept any liability for any damage caused by an antenna due to unknown variables. Parsec Technologies 972-804-4600 support@parsec-t.com Last Revised: 02.29.2024 Springer Spaniel Installation Instructions Page 12 of 12...
Need help?
Do you have a question about the Springer Spaniel and is the answer not in the manual?
Questions and answers