Download Print this page
POSIFLEX KP-450 User Manual
POSIFLEX KP-450 User Manual

POSIFLEX KP-450 User Manual

Side mount programmable keypad

Advertisement

Quick Links

KP-450 Side Mount
Programmable Keypad
User's Manual
Rev.: Original
FCC Notes:
This equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions manual, may cause interference
to radio communications. It has been tested and found to comply with limits for a Class
A digital device pursuant to subpart J of Part 15 of FCC Rules, which are designed to
provide reasonable protection against interference when operated in a commercial
environment. Operation of this equipment in a residential area is likely to cause
interference in which case the user at his own expense will be required to take whatever
measures to correct the interference.
Warranty Limits:
Warranty terminates automatically when any person other than the authorized
technicians opens the machine. The user should consult his/her dealer for the problem
happened. Warranty voids if the user does not follow the instructions in application of
this merchandise. The manufacturer is by no means responsible for any damage or
hazard caused by improper application.
About This Manual:
Posiflex Technology, Inc. has made every effort for the accuracy of the content in this
manual. However, Posiflex Technology, Inc. will assume no liability for any technical
inaccuracies or editorial or other errors or omissions contained herein, or for direct,
indirect, incidental, consequential or otherwise damages, including without limitation
loss of data or profits, resulting from furnishing, performance, or use of this material.
This information is provided "as is" and Posiflex Technology, Inc. expressly disclaims
any warranties, expressed, implied or statutory, including without limitation implied
warranties of merchantability or fitness for particular purpose, good title and against
infringement.
The information in this manual contains only essential hardware concerns for general
user and is subject to change without notice. Posiflex reserves the right to alter product
designs, layouts or drivers without notification. The system integrator shall provide
applicative notices and arrangement for special options utilizing this product. The user
may find the most up to date information of the hardware from web sites:
http://www.posiflex.com or http://www.posiflex.com.tw or http://www.posiflexusa.com
All data should be backed-up prior to the installation of any drive unit or storage
peripheral. Posiflex Technology, Inc. will not be responsible for any loss of data
resulting from the use, disuse or misuse of this or any other Posiflex product.
All rights are strictly reserved. No part of this documentation may be reproduced,
stored in a retrieval system, or transmitted in any form or by any means, electronic,
mechanical, photocopying, or otherwise, without prior express written consent from
Posiflex Inc. the publisher of this documentation.
© Copyright Posiflex Technology, Inc. 2011
All brand and product names and trademarks are the property of their respective holders.
Part 1
P/N: 18410900010

Advertisement

loading
Need help?

Need help?

Do you have a question about the KP-450 and is the answer not in the manual?

Questions and answers

Summary of Contents for POSIFLEX KP-450

  • Page 1 About This Manual: Posiflex Technology, Inc. has made every effort for the accuracy of the content in this manual. However, Posiflex Technology, Inc. will assume no liability for any technical inaccuracies or editorial or other errors or omissions contained herein, or for direct, indirect, incidental, consequential or otherwise damages, including without limitation loss of data or profits, resulting from furnishing, performance, or use of this material.
  • Page 2: General Description

    KEYTOP LAYOUT Keytop Replacement The keypad in KP-450 is organized into 2 parts: a 4 X 4 numerical keypad area and a 1 X 4 matrix with a 5 x 5 square programmable keypad areas. Conversely, this keypad allows some layout alterations by the system integrator.
  • Page 3: Keypad Programming

    KEYPAD PROGRAMMING The programming of the keys above the numerical keypad in KP-450 is in general the task of the system integrator and not the average end user. For end user, please go to the chapter of “OPERATION GUIDE” of this manual directly.
  • Page 4 In the command menu of the programming utility, “Keyboard” => “Read” or “Write” can be used to transfer the current content in KP-450 to the program memory or vice versa. “File” => “Open” or “Save” can be used to edit an existing template file or preserved the current program content to a template file.
  • Page 5 Hardware Limitation in Programming In case of “multiple combination key” application which means pressing three or more keys at the same time to obtain certain data output from the keypad, there could be some limitations inherent from the nature of keypad structure. The CPU of keypad detects the contact between the “horizontal”...