POSIFLEX KP-300 User Manual
POSIFLEX KP-300 User Manual

POSIFLEX KP-300 User Manual

Side mount programmable keypad

Advertisement

KP-300 / KP-300T
SIDE MOUNT
PROGRAMMABLE KEYPAD
USER'S MANUAL
Rev.: B0
FCC Notes:
This equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions manual, may cause interference
to radio communications. It has been tested and found to comply with limits for a Class
A digital device pursuant to subpart J of Part 15 of FCC Rules, which are designed to
provide reasonable protection against interference when operated in a commercial
environment. Operation of this equipment in a residential area is likely to cause
interference in which case the user at his own expense will be required to take whatever
measures to correct the interference.
Warranty Limits:
Warranty terminates automatically when any person other than the authorized
technicians opens the machine. The user should consult his/her dealer for the problem
happened. Warranty voids if the user does not follow the instructions in application of
this merchandise. The manufacturer is by no means responsible for any damage or
hazard caused by improper application.
About This Manual:
Posiflex Technologies, Inc. has made every effort for the accuracy of the content in this
manual. However, Posiflex Technologies, Inc. will assume no liability for any technical
inaccuracies or editorial or other errors or omissions contained herein, nor for direct,
indirect, incidental, consequential or otherwise damages, including without limitation
loss of data or profits, resulting from furnishing, performance, or use of this material.
This information is provided "as is" and Posiflex Technologies, Inc. expressly
disclaims any warranties, expressed, implied or statutory, including without limitation
implied warranties of merchantability or fitness for particular purpose, good title and
against infringement.
The information in this manual contains only essential hardware concerns for general
user and is subject to change without notice. Posiflex reserves the right to alter product
designs, layouts or drivers without notification. The system integrator shall provide
applicative notices and arrangement for special options utilizing this product. The user
may find the most up to date information of the hardware from web sites:
http://www.posiflex.com or http://www.posiflex.com.tw or http://www.posiflexusa.com
All data should be backed-up prior to the installation of any drive unit or storage
peripheral. Posiflex Technologies, Inc. will not be responsible for any loss of data
resulting from the use, disuse or misuse of this or any other Posiflex product.
All rights are strictly reserved. No part of this documentation may be reproduced,
stored in a retrieval system, or transmitted in any form or by any means, electronic,
mechanical, photocopying, or otherwise, without prior express written consent from
Posiflex Inc. the publisher of this documentation.
© Copyright Posiflex Technologies, Inc. 2008
All brand and product names and trademarks are the property of their respective holders.
Part 1
P/N: 19830900030

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the KP-300 and is the answer not in the manual?

Questions and answers

Summary of Contents for POSIFLEX KP-300

  • Page 1 KP-300 / KP-300T SIDE MOUNT PROGRAMMABLE KEYPAD USER’S MANUAL Rev.: B0 FCC Notes: This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions manual, may cause interference to radio communications. It has been tested and found to comply with limits for a Class...
  • Page 2: General Description

    ISO 7811 reader head for tracks 1 and 2 ISO 7811 reader head for tracks 1, 2 and 3 + AAMVA + CA DMV JIS/II reader head Smart card reader Sound ports for KP-300 KP-300 KS-6115/KS-621X/ KS- 631X series Vertical layout...
  • Page 3: Unpacking Contents

    Control keys (4 pcs / set) Legend sheets (4 sh. / set) This manual Note: Utility drivers for KP-300 / KP-300T can be found in the CD or DVD packaged or please find for latest updates by visiting driver download page of our web site:http://www.posiflex.com.tw/DriversDownload.asp...
  • Page 4: Keypad Programming

    KEYPAD PROGRAMMING The programming of the keys above the numerical keypad in KP-300 / KP-300T is in general the task of the system integrator and not the average end user. For end user, please go to the chapter of “OPERATION GUIDE” of this manual directly.
  • Page 5 A normal keyboard may be required for inputting data in keypad programming. In the command menu of the programming utility, “Keyboard” => “Read” or “Write” can be used to transfer the current content in KP-300 / KP-300T to the program memory or vice versa. “File” => “Open” or “Save”...
  • Page 6 Hardware Limitation in Programming In case of “multiple combination key” application which means pressing three or more keys at the same time to obtain certain data output from the keypad, there could be some limitations inherent from the nature of keypad structure.
  • Page 7: Keypad Layout

    PROGRAMMABLE KEYPAD Electronic Control Key On top right corner of KP-300 / KP-300T, there is an electronic control key that can be turned to one of the following 6 positions: LP, L0, L1, L2, L3 and L4. It can only be taken out from the switch at positions L0 and L1.
  • Page 8: Smart Card Reader (Option)

    The magnetic stripe reader in KP-300 / KP-300T connects to the host through USB port as an USB KB and therefore requires no driver installation to get it working.
  • Page 9 The external access to audio ports can be found in the side mount option kit KP-300 with a Microphone in and a stereo line out jacks at its bottom surface as circled in the right picture.
  • Page 10 T31454 警告使用者 這是甲類的資訊產品,在居住的環 境 中 使 用 時 , 可 能 會 造 成 射 頻 干 擾,在這種情況下,使用者會被要 求採取某些適當的對策。 Part 10...

This manual is also suitable for:

Kp-300t

Table of Contents