Advertisement

Chapter 1: Introduction

The new Genius TVGo A31 is an excellent combination of PC and TV system, without the need of a screw
driver or any software driver installation. Just plug the cables and power adapter in, and you get HDTV quality
TV reception and you can watch Analog TV on your TFT LCD / CRT monitor or projector. It supports higher
resolution from 800 x 600 up to WSXGA 1680 x 1050 pixels.
The TVGo A31 also supports the PIP (picture in picture) re-sizing feature, and you can work on your PC and
still watch your favorite TV or video programs.
You can also connect the TVGo A31 to a DVD player, VCD player, camcorder or video game, so you can
experience more visual and audio entertainment.
1.1 Package Contents
Make sure the following parts are included when you open the package. If not, contact your distributor or
dealer.
TVGo A31 TV Box
IR remote
controller
1.2 System Requirements
Display unit CRT / LCD with Standard VGA connector (D-Sub 15 pin). A PC system is necessary when
PIP mode is required.
RF antenna signal or CATV signal.
Independent of OS (operating system), no software driver installation or HDD space is needed.
1.3 Main Features
Resolution up to WSXGA: 1680 x 1050 resolution. The most optimized VIDEO display setting is 1024 x
768 with the vertical refresh rate at 75Hz gives the best performance In a generic 15 inch LCD monitor,
while in 20 inch LCD wide monitor you can set it to 1680x1050。
PiP Function supports sub-Video display in PC: In addition to full screen display, the PIP feature
allows you to watch TV while working on your PC, the PIP sub video window is moveable to any place on
the VGA monitor.
MTS Stereo: HDTV WS supports SAP and Stereo audio, according to the broadcasting program, you can
choose a second language for receiving stereo audio.
16 Channels TV wall for program preview: the TV program can be previewed in 4, 9 or 16 display
windows, and can be easy manipulated using the function key or remote control。
Sharper and stunning picture: Adaptive 3D noise reduction filter, enhanced motion adaptive 3D
de-interlacing and adaptive Luma/Chroma enhanced engine.
Multiple input /output source: The support connector includes (RCA) input and output, S-VHS input, 3.5
mm stereo audio input and output, convent to VCR or DVD connection。
AC adapter
VGA-In loop back
cable (for PIP mode
use)
1
YPbPr cable
Audio cable for connecting to PC sound
system
English
User's Manual

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the A31V3 and is the answer not in the manual?

Questions and answers

Summary of Contents for Genius A31V3

  • Page 1: Chapter 1: Introduction

    PiP Function supports sub-Video display in PC: In addition to full screen display, the PIP feature allows you to watch TV while working on your PC, the PIP sub video window is moveable to any place on the VGA monitor.
  • Page 2: Chapter 2: Getting Started

    2.3 Wire connection There is no sequential requirement which cable should be connected first except the AC adapter, it is strongly recommended to connect the AC adapter last when you finish all the connections. *For Macintosh user, the connectors or cable requirement may be different, this package doesn’t contain such accessories, and you need to get it from a Macintosh shop if...
  • Page 3 2.3.2 Wire connection for watching TV on Monitor without PC: 2.3.3 External Video/Audio input connection: When connect HDTV WS with external video / audio device such as DVD, VCR or Camcorder to enjoy high quality visual / sound entertainment, turn off the system...
  • Page 4: Chapter 3: Use The Box

    2. Press SYS key to choose TV system. Our default setting is PAL BG/DK. 3. Press Exit key to return to main menu and use VOL+/VOL- key to select “TUNE” menu, choose Auto scan and press Menu key to start scan.
  • Page 5: Chapter 4: Using The Remote Control

    Chapter 4: Using the Remote Control The remote control allows you to operate this box, such as turning your TV on / off, viewing the TV, and changing the channels and volume. Aim the front of the Remote Control at the Remote Control Receiver and press the control buttons as you would on the infrared ray receiver.
  • Page 6: Osd Display Menu Setting

    The MENU configuration is shown above. Use the CH+/CH- key to move the cursor to the desired item, once you reach it, click on the MENU key to select it. If there is a sub Menu for the selected item, you can set the Value setting; use the VOL+/VOL- key to set the proper value.
  • Page 7: Operation

    English 4.4.1 Video Picture Setting 4.4.1.1 Picture Setting ITEMS OPERATION CONTENTS BRIGHT MENU→VOL+/VOL- Picture Brightness Adjustment CONTRAST MENU→VOL+/VOL- Picture Contrast Adjustment SATURATION MENU→VOL+/VOL- Picture Saturation Adjustment MENU→VOL+/VOL- Picture Hue Adjustment SHARPNESS Picture Sharpness Adjustment MENU→VOL+/VOL- 4.4.1.2 Sound Setting ITEMS OPERATION...
  • Page 8 VOL+/VOL→MENU sequence list EXCHANGE Save adjusted channel sequence MENU→VOL+/VOL- SAVE list SKIP MENU→VOL+/VOL- To skip the undesired channels FINE - TUNING Channel Frequency fine tune MENU→VOL+/VOL- AUTO SCAN VOL+/VOL- Auto TV channel scanning MANUAL SCAN MENU→VOL+/VOL- TV channel scanning manually...
  • Page 9: Osd Timeout

    English ITEMS OPERATION CONTENTS TV SYSTEM PAL TV system standard MENU→VOL+/VOL- select BLUE SCREEN Background color setting MENU→VOL+/VOL VIDEO Input video source select, MENU→VOL+/VOL SOURCE TV/AV/SV DISPLAY Video output mode select MENU→VOL+/VOL SCALE 16:9, 16:10, 4:3 RESOLUTION Output image resolution MENU→VOL+/VOL-...

This manual is also suitable for:

Tvgo a31

Table of Contents