Stirling STR-CD60 Quick Start Manual

A
Installing the machine
CAUTION! This clothes dryer is heavy – ensure you have a helper to move and install it. Move cautiously
when moving the dryer. Do not attempt to lift it by grasping the door. A team lift or mechanical aid is
required when moving it.
WHERE TO INSTALL? This clothes dryer is designed with the control panel low on the front panel so
it is in easy reach when wall-mounted. If you want to wall-mount it upside down, use the extra control
panel (supplied) so the printing is the right way up. The dryer is equally suitable for installation on the floor
level, or mounted on a rack (rack not included). Comprehensive instructions for all installation options are
included in the instruction manual.
CAUTION! Your wall must be structurally sound and sturdy enough to support the weight of the dryer with
a full load (40 kg). If in doubt, consult a builder.
NOTE: Before you use the dryer for the first time, place some clean, damp rags into the drum and run a
complete cycle on the 1 Hour program following the instructions on page 18 in the manual.
2- 正置
2- 正置
2- 正置
2- 正置
2- 正置
2- 正置
2- 正置
2- 正置
2- 正置
1
3
2- 正置
2- 正置
Quick Start Guide
Let's get your new 6 kg vented
clothes dryer ready to use!
2
4a
Clothes Drying
For the Smart program, simply press the POWER
4b
For the Extra program, press the POWER button,
then the PROGRAM button until the Extra indicator
For the 1 Hour program, press the POWER button,
then the PROGRAM button until the 1 Hour
indicator lights up, then press the TEMPERATURE
4c
button and select an appropriate temperature, then
Model: STR-CD60
Preparation
Plug in the machine.
Load your washing into the dryer
- page 17 in the instruction manual has
useful hints to help you with this.
button, then the START/PAUSE button.
lights up, then press START/PAUSE.
press START/PAUSE.
The programs are explained on the other
side of this page ...
B
1
2
Close the door.
3
C
4a
6
or:
4b
6
or:
4c