Stirling STR-CD50 Quick Start Manual

A
Installing the machine
CAUTION! This clothes dryer is heavy – ensure you have a helper to move and install it. Move cautiously
when moving the dryer. Do not attempt to lift it by grasping the door. A team lift or mechanical aid is
required when moving it.
WHERE TO INSTALL? This clothes dryer is designed with the control panel low on the front panel so it is
in easy reach when wall-mounted. If you want to wall-mount it upside down, use the extra control panel
(supplied) so the printing is the right way up. The dryer is equally suitable for installation on the floor level,
or mounted on a rack (not included). Comprehensive instructions for all installation options are included in
the instruction manual.
CAUTION! Your wall must be structurally sound and sturdy enough to support the weight of the heater with
a full load (40kg). If in doubt, consult a builder.
NOTE: Before you use the dryer for the first time, place some clean rags into the drum and run a complete
cycle on the 1 Hour program following the instructions on page 18 in the manual.
Quick Start Guide
1
3
4b
4c
Let's get your new clothes dryer
2
- page 16 in the instruction manual has
4a
Clothes Drying
For the Smart program, simply press the POWER
button, then the START/PAUSE button.
For the Extra program, press the POWER button,
then the PROGRAM button until the Extra indicator
For the 1 Hour program, press the POWER button,
then the PROGRAM button until the 1 Hour
indicator lights up, then press the TEMPERATURE
button and select an appropriate temperature, then
Model: STR-CD50
ready to use!
Preparation
Plug in the machine.
Load your washing into the dryer
useful hints to help you with this.
Close the door.
lights up, then press START/PAUSE.
press START/PAUSE.
The programs are explained on the
other side of this page ...
B
1
2
3
C
4a
6
or:
4b
6
or:
4c