Subscribe to Our Youtube Channel
Related Manuals for Wenglor IR2F001
Summary of Contents for Wenglor IR2F001
- Page 1 Operating Instructions IR2F001 Inductive Ring Sensor Translation of the original operating instructions Subject to change without notice Available as PDF file only Version 2.2 www.wenglor.com...
-
Page 2: Table Of Contents
Starting Up the Product with User-Defined Settings..................15 6.2 LED Symbols ..................................19 7 Setup via IO-Link ................................21 8 Maintenance Instructions ............................. 22 9 Proper Disposal ................................23 10 Declarations of Conformity............................24 Table of Contents | IR2F001 ‒ Inductive Ring Sensor... -
Page 3: General
The safety precautions and warnings are laid out in accordance with the following principle: SIGNAL WORD Type and source of danger! Possible consequences in the event that the hazard is disregarded. à Measures for averting the hazard. 1 ‒ General | IR2F001 ‒ Inductive Ring Sensor... -
Page 4: Limitation Of Liability
• wenglor assumes no liability for printing errors or other inaccuracies contained in these operating in- structions unless wenglor was verifiably aware of such errors at the point in time at which the operat- ing instructions were prepared. -
Page 5: Copyrights
• All rights are reserved by wenglor. • Commercial reproduction or any other commercial use of the provided content and information, in particular graphics and images, is not permitted without previous written consent from wenglor. 1 ‒ General | IR2F001 ‒ Inductive Ring Sensor... -
Page 6: For Your Safety
• The product is not suitable for use in potentially explosive atmospheres. • The product may be used only with accessories supplied or approved by wenglor, or in combination with approved products. A list of approved accessories and combination products can be found at www.wenglor.com on the product detail page. -
Page 7: Personnel Qualifications
Read the operating instructions carefully before using the product. Protect the sensor against contamination and mechanical influences. Approvals and Protection Class IND. CONT. EQ 72HL / E189727 For use in class 2 circuits 2 ‒ For Your Safety | IR2F001 ‒ Inductive Ring Sensor... -
Page 8: Technical Data
Output Push-Pull Circiut NC/NO Pulse extension 200 ms Other parameters Sensitivity Error indicator Frequency switching Output Technical Safety Data MTTFd (EN ISO 13849-1) 1019,99 * Relates to a steel ball 3 ‒ Technical Data | IR2F001 ‒ Inductive Ring Sensor... -
Page 9: Housing Dimensions
68 = supply voltage indicator Complementary Products wenglor offers you the right connection and mounting technology as well as other accessories for your product. You can find this at www.wenglor.com on the product details page at the bottom. Scope of Delivery •... -
Page 10: Transport And Storage
• Protect the product against exposure to direct sunlight. NOTICE Risk of property damage in case of improper storage! The product may be damaged. à Storage instructions must be complied with. 4 ‒ Transport and Storage | IR2F001 ‒ Inductive Ring Sensor... -
Page 11: Installation And Electrical Connection
• Insert the soft binder on the hinge side (to pre- vent it from being lost) and thread it through the feed-through • Open the device’s hanger • Place the soft binder around the feed tube 5 ‒ Installation and Electrical Connection | IR2F001 ‒ Inductive Ring Sensor... -
Page 12: Other Installation Options
The maximum tightening torque when using an M4 mounting screw is 2.9 Nm. In addition, the minimum installation distance to metal (cf. Technical Data) must be maintained. 5.1.3 Installation Instructions Adjacent devices alternating between alternative frequency / without alternative frequency IR2F001 5 ‒ Installation and Electrical Connection | IR2F001 ‒ Inductive Ring Sensor... -
Page 13: Smallest Recognizable Object
Risk of personal injury or property damage due to electric current. Voltage-conducting parts may cause personal injury or damage to equipment. à The electric device may be connected by appropriately qualified personnel only. 5 ‒ Installation and Electrical Connection | IR2F001 ‒ Inductive Ring Sensor... -
Page 14: Troubleshooting
Risk of personal injury or property damage in case of non-compliance! The system’s safety function is disabled. Personal injury and damage to equipment may occur. à Required action as specified in case of fault. 5 ‒ Installation and Electrical Connection | IR2F001 ‒ Inductive Ring Sensor... -
Page 15: Functions Overview
When adjusting settings on the device, a distinction can be made between setting the sensitivity and the time delay. 6.1.3.1 Setting the Sensitivity to Object Size Turn the potentiometer all the way to the left LED symbols according to section LED Symbols [} 19] 6 ‒ Functions Overview | IR2F001 ‒ Inductive Ring Sensor... - Page 16 2 Teaching in the environment [} 15] 6.1.3.3 Setting the Pulse Length The pulse length adjuster can be used to set the time until the signal drops at the output between 5 ms and 200 ms. 6 ‒ Functions Overview | IR2F001 ‒ Inductive Ring Sensor...
- Page 17 Counter Max Value (Period): Configurable value that specifies the period length in relation to the counter Perioden Counter: Indicates the number of periods Counter Output Status: Indicates the switching behavior of the counter 6 ‒ Functions Overview | IR2F001 ‒ Inductive Ring Sensor...
- Page 18 Figures 5 and 6 explain the “Compare mode 2” with a “Counter Compare Value” of 3 and a “Counter Max Value (Period)” of 5. Illustration 5: Compare mode 2 function - counting up Illustration 6: Compare mode 2 function - counting down 6 ‒ Functions Overview | IR2F001 ‒ Inductive Ring Sensor...
-
Page 19: Led Symbols
The device has an error. Information on how to remedy the error can be found in the trou- bleshooting section Switching output active Green Yellow The environment has been taught Blue** Not lit up 6 ‒ Functions Overview | IR2F001 ‒ Inductive Ring Sensor... - Page 20 Flashing Permanently lit up * Flashing behavior: 1 Hz 50 ms On to 950 ms Off ** Flashing behavior: 1 Hz 500 ms On to 500 ms Off 6 ‒ Functions Overview | IR2F001 ‒ Inductive Ring Sensor...
-
Page 21: Setup Via Io-Link
Setup via IO-Link Process and parameter data can be found in the interface protocol at: www.wenglor.com - Products - En- ter the desired product number as a search term, then click on “Downloads” on the product page. Process Data: • Counter •... -
Page 22: Maintenance Instructions
Cleaning and inspection of the plug connections at regular intervals are advisable. Do not clean the sensor with solvents or cleaning agents that could damage the product. The product must be protected against contamination during initial start-up. 8 ‒ Maintenance Instructions | IR2F001 ‒ Inductive Ring Sensor... -
Page 23: Proper Disposal
Proper Disposal wenglor sensoric GmbH does not accept the return of unusable or irreparable products. Respectively valid national waste disposal regulations apply to product disposal. 9 ‒ Proper Disposal | IR2F001 ‒ Inductive Ring Sensor... -
Page 24: Declarations Of Conformity
Declarations of Conformity Declarations of conformity can be found on our website at www.wenglor.com in the product’s separate download area. 10 ‒ Declarations of Conformity | IR2F001 ‒ Inductive Ring Sensor...
Need help?
Do you have a question about the IR2F001 and is the answer not in the manual?
Questions and answers