Usage Guidelines - Kodak DP1100 Reference Manual

Usage Guidelines

3/99
• Do not look directly into the projection lens when the
projector is turned on. The bright light may harm your
eyes.
• Do not block the grills on the projector. Restricting the
air flow can cause it to overheat and turn off. If this
happens, you must wait a minute before attempting to
turn it back on.
• Handle the projector as you would any product with
glass components. Be especially careful not to drop it.
• Avoid leaving the projector in direct sunlight or
extreme cold for extended periods of time. If this
happens, allow it to reach room temperature before use.
• This projector is not intended for use in mainframe
computer rooms as defined in the Standard for the
Protection of Electronic Computer/Data Processing
Equipment, ANSI/NFPA 75.
Projector Features
7