User’s Guide KODAK DP900 / DP1100 Digital Projectors This guide contains the setup and operating procedures for your KODAK DP900 or DP1100 Digital Projector. For more information on how to connect, operate and maintain your projector, refer to your Reference Manual.
User’s Guide KODAK DP900 / DP1100 Safety Terms: • Warning: Don’t look directly into the lens when the projector is turned on. • Warning: Don’t block ventilation openings. • Warning: Refer all service to qualified service personnel. Servicing your own projector will void the warranty. See “For More Information”...
Unpacking the Projector The projector comes with the items shown here. If any items are missing, call your dealer immediately. 1. Digital projector and lens cap 2. Soft carry case 3. Remote control 4. Power cord 5. DP900 / DP1100 User’s Guide,...
User’s Guide KODAK DP900 / DP1100 Projector Features Front of Projector focus ring Rear and Side of Projector front of projector elevator button power cord connector Connector Panel s-video composite connector elevator button zoom ring keypad speaker power switch cable...
Connecting the Projector You can connect your projector to a laptop computer, desktop computer, or video player. All connections are made with the aid of icons on the cables. The cables with their icons are shown here. Caution: Make sure your projector, computer and video player are turned off before you connect them.
User’s Guide KODAK DP900 / DP1100 Connecting to a Laptop Computer mouse cable 1. Connect the connector on the projector’s connector panel. 2. Plug the connector on your laptop. 3. Plug either end of the audio cable into the audio connector on your computer;...
Connecting to a Desktop Computer mouse cable monitor cable 1. Connect the connector on the projector’s connector panel. 2. Locate the cable that connects your monitor to your computer and unplug it from the computer. 3. Plug your monitor cable into the hub.
Page 12
User’s Guide KODAK DP900 / DP1100 6. Unplug the mouse cable from your computer and plug the end of the PS/2 mouse cable into the mouse connector on your computer. Then plug the Or if you have a USB connection:...
“audio out” port on the video player. 4. Plug the A/V cable’s other white and red connectors to the left and right “audio in” ports on the projector. To start using your projector, go to “Starting the Projector” on page 11. 3/99...
User’s Guide KODAK DP900 / DP1100 Connecting with an S-video Cable 1. Connect the S-video cable to the “s-video out” connector on the video player. 2. Plug the other end of the cable into the “s-video” connector on the projector.
3. Press the “I” side of the power switch to turn on the projector. The Kodak start-up screen appears and the power LED on top of the projector lights up. 4. Turn on your video source - a video player or a computer.
Page 16
User’s Guide KODAK DP900 / DP1100 5. Position the projector and adjust the zoom setting for the image size you want. DP900 DP1100 20 ft. 12 ft. 5 ft. 3.7 m 1.5 m 20 ft. 12 ft. 5 ft. 3.7 m 1.5 m...
Page 17
Adjust the zoom ring • Focus by rotating focus lens. • Be sure the projector is at a 90-degree angle to the screen. • Adjust the height of the projector. Press and hold the elevator button. Raise the projector to the height you want, then release the button.
User’s Guide KODAK DP900 / DP1100 Using the Remote Control Point the remote control at the projection screen or at the front or rear of the projector. For best results, point the remote directly at the projector. The range for optimum operation is about 40 feet (12 m).
Using the Keypad The keypad is lit green while the menus are displayed and is lit orange when the projector is on. While the menus are displayed, the volume, source, and standby buttons act as navigation buttons. source button - toggles...
Page 20
User’s Guide KODAK DP900 / DP1100 To view the on-screen menus, press the keypad or remote. The menu bar appears and the volume, source, and standby buttons become navigation buttons. To select a menu, use the keypad or the remote control to move the cursor left and right to highlight the menu you want.
To completely turn off the projector, press the “0” side of the power switch on the side of the projector. If you want to turn the projector back on immediately, allow about a minute for the lamp to cool. The lamp will not light if it is too hot.
User’s Guide KODAK DP900 / DP1100 For More Information The first place to look for help is in the Reference Manual. Be sure to check the guidelines in “Troubleshooting.” Online Services Contact Kodak via: World Wide Web America Online CompuServe...
Customer Support If you have questions concerning the operation of your KODAK projector, you can speak directly to a customer support representative. Have the projector serial number ready, and be at your computer with your projector when you call. In the U.S. and Canada call toll free, 1-888-375-6325, between the hours of 9:00 a.m.
Need help?
Do you have a question about the DP1100 and is the answer not in the manual?
Questions and answers