Table of Contents
Advertisement
Troubleshooting
Camera problems
Status
Camera does not
turn on/off, buttons
and controls do not
function
In Review, a blue or
black screen is
displayed instead of
a picture
Pictures remaining
number does not
decrease after taking a
picture
Flash does not fire
Memory card is almost
or entirely full
Battery life is short
You cannot take a
picture
www.kodak.com/go/support
Solution
■
Make sure the batteries have a charge and are installed correctly
(see
page
2).
■
Turn the camera off, then on again.
■
Transfer all pictures to the computer (see
■
Take another picture.
■
Continue taking pictures. The camera is operating normally.
(The camera estimates the number of pictures remaining after each
picture is taken, based on picture size and content.)
■
Check the flash setting, and change as needed (see
NOTE: The flash does not fire in all modes.
■
Transfer the pictures to the computer (see
■
Delete pictures from the card (see
■
Make sure the correct battery type is installed (see
■
Wipe the contacts with a clean, dry cloth before inserting a
battery in the camera.
■
Insert new or charged batteries (see
■
Turn the camera off, then on again.
■
Depress the Shutter button all the way (see
■
Insert new or charged batteries (see
■
Memory is full. Transfer pictures to the computer (see
delete pictures (see
page
page
page
page
15), or insert another card.
Getting help
page
31).
page
7).
page
31).
15) or insert a new card.
page
48).
2).
page
5).
2).
page
31),
39
Advertisement
Table of Contents
