Table of Contents
Advertisement
Error Codes
Error Code
740 - 742
There is a problem with the program
PROMS or the controller printed
circuit board
748, 749,
There is a PHM failure
74A - 74D
750 - 756
Unexpected write from DSP
757
There is a DSP set verify failure
760 - 773,
There is a problem with the
76A - 76F
controller printed circuit board
800 - 857
There is a general problem with the
controller printed circuit board
900 - 930,
There is a problem with the DSP
090B - 094B
block or checksum
SERVICE
An error occurred. The message
REQ XXX
includes a 4-digit error code.
CONTENTS
Description
INDEX
SEARCH
Possible Solution
1. Turn the printer Off .
2. Disconnect all cables except
the power cable.
3. Turn the printer On .
4. If the error:
• persists, call for service.
• clears, the computer, cabling
or software could be causing
the problem.
1. Turn the printer Off , then On .
2. If the error persists, call for
service.
HELP
Operator's Guide
Printing
Guide
Color Management
Calibration
Network
Interface Guide
Overview
Setting up the Printer
Operating the Printer
Troubleshooting
Site Specifications
Accessories
Customizing the
Printer
Advertisement
Table of Contents
