Table of Contents
Advertisement
Use the Print button as follows:
•
To reprint a valid job that is still in the image buffer.
NOTE:
If you press Print when there is a valid job still in the image buffer
(indicated by an asterisk on the right side of the display panel
when READY is displayed), the last page printed will print again.
If an asterisk is not displayed, a test print is generated.
•
To generate a test print when the printer is idle.
•
To begin printing after a mismatch occurs. For more information,
Mismatches
Occur".
•
In combination with Setup/Select to scroll through the Setup menu.
Use the Setup/Select button to enter the Setup mode and change the
way the printer is set up.
complete information.
CONTENTS
Refer to "Working With the Printer Settings"
INDEX
SEARCH
Operator's Guide
Printing
Guide
Color Management
Calibration
"When
Network
Interface Guide
Overview
for
Setting up the Printer
Operating the Printer
Troubleshooting
Site Specifications
Accessories
Customizing the
Printer
HELP
Advertisement
Table of Contents
