Table of Contents
Advertisement
Printer Settings
Setting
Options
Port (IPX)
802.2, 802.3,
SNAP, ETHERNET
2, AUTOSELECT
Port
Fill in IP Address in
(TCP/IP)
following format:
nnn.nnn.nnn.nnn
Port (SCSI)
Target ID 0 - 7
Defaults
Paper,
(Media
Transparency, Draft
type)
Defaults
Reset
(Factory)
CONTENTS
Description
Specifies the framing type the
printer should expect.
Sets up the Internet address of the
printer within a TCP/IP network.
Specifies the printer's SCSI
address.
• Select Paper if paper is loaded in
the tray.
• Select Transparency to print high-
density transparencies.
• Select Draft for faster printing and
proofing of transparencies.
Lets you restore the printer settings
to their factory default values.
IMPORTANT:
interface card is installed, resetting
to the factory defaults may cause
network printing problems.
INDEX
SEARCH
If the network
Operator's Guide
Factory
Printing
Default
Guide
AUTO-
SELECT
Color Management
000.000.00
Calibration
0.000
Network
5
Interface Guide
Overview
Paper
Setting up the Printer
Operating the Printer
Troubleshooting
Site Specifications
Accessories
Customizing the
Printer
HELP
Advertisement
Table of Contents
