Advertisement
Starting Point
The Starting Point box allows you to select the data that will act as a base
for the new calibration table.
Read Current Table From Printer—allows you to retrieve and begin with
the table currently in the printer. After the table is loaded, you can edit it
and recalibrate the printer. This option is not always available as a
starting point.
NOTE:
The Read Current Table From Printer is not available if the printer
cannot return this information. For example, many printers with a
parallel connection have this item deselected.
Use Printer's Default Table—default data in the printer acts as the
starting point for the new calibration document.
Copy Table from File—the calibration table you select with the Select
File button acts as the starting point for the new calibration document.
CONTENTS
INDEX
SEARCH
Operator's Guide
Printing
Guide
Color Management
Calibration
Network
Interface Guide
Getting Started
Easy Cal
Setting Preferences
and Using
Calibration Tables
Visual Gray Balance
Visual Linearity
Densitometer
Calibration
HELP
Advertisement
