Kodak 8670 PS - CALIBRATION GUIDE Getting Started Manual page 48

Running a Densitometer Calibration
1. Make sure your densitometer is calibrated and set up according to
the manufacturer's instructions.
2. Pull down the Calibration menu, and select "Densitometer".
3. Pull down the Calibration menu, and select "Setup Densitometer".
The Calibration Setup — Densitometer dialog box appears.
NOTE: For a description of the dialog boxes used in the Densitometer
Calibration,
4. Select a densitometer status in the Densitometer box.
5. Pull down the Number of Squares menu in the test Print box, and
select the number of squares you want in your test print.
Click on OK .
6.
CONTENTS
refer to "Option Descriptions."
INDEX SEARCH
Operator's Guide
Printing
Guide
Color Management
Calibration
Network
Interface Guide
Getting Started
Easy Cal
Setting Preferences
and Using
Calibration Tables
Visual Gray Balance
Visual Linearity
Densitometer
Calibration
HELP