Advertisement
NOTE:
If you are using a black ribbon, you cannot use the Visual Gray
Balance calibration procedure. Go directly to the Visual Linearity
calibration procedure.
Using an Existing Calibration Table as the Starting
Point
Follow the steps below only if you have previously created and saved a
calibration table. If the table you select as a starting point does not
contain printer setup information,
Printer."
1.
Select "Copy
Table from File" in
the Starting Point
box.
Click on Select
2.
File .
CONTENTS
refer to "Selecting and Setting Up a
INDEX
SEARCH
Operator's Guide
Printing
Guide
Color Management
Calibration
Network
Interface Guide
Getting Started
Easy Cal
Setting Preferences
and Using
Calibration Tables
Visual Gray Balance
Visual Linearity
Densitometer
Calibration
HELP
Advertisement
