About Printer Initialization - Kodak 1400 User Manual

About Printer Initialization

When you turn the 1400 printer on, it initializes (starts up and performs a
self-check) in a few seconds. During this time, the POWER and MEDIA lights
blink.
If the 1400 Printer Does Not Initialize
If the 1400 printer fails to initialize, no light illuminates on the display panel.
Turn the 1400 printer off and then back on.
If a light still does not illuminate, turn off both the 1400 printer and the
computer. Disconnect the USB cable from the 1400 printer and turn on the
printer. If no light illuminates, call for service.
CONTENTS
PRINTER DRIVER GUIDE
HELP
SEARCH
Introduction
Setting up the 1400
Printer
Operating the 1400
Printer
Troubleshooting
Site Specifications
Accessories and
Supplies