Boot Settings Configuration; Security Screen - ASROCK P4VM890 - V1.1 User Manual

3.5.1

3.5.1 Boot Settings Configuration

3.5.1 Boot Settings Configuration Boot Settings Configuration Boot Settings Configuration
3.5.1 3.5.1 Boot Settings Configuration
Boot Settings Configuration
Boot From Network
VIA SATA Raid Utility
Bootup Num-Lock
v02.54 (C) Copyright 1985-2003, American Megatrends, Inc.
Boot From Network
Use this item to enable or disable the Boot From Network feature.
VIA SATA Raid Utility
Use this to enable or disable VIA
during POST.
Boot Up Num-Lock
If this item is set to [On], it will automatically activate the Numeric Lock
function after boot-up.
3.6 3.6

Security Screen

Security Screen
3.6 3.6 Security Screen 3.6 Security Screen Security Screen
In this section, you may set or change the supervisor/user password for the system.
For the user password, you may also clear it.
Main Advanced
Security Settings
Supervisor Password : Not Installed
User Password : Not Installed
Change Supervisor Password
Change User Password
v02.54 (C) Copyright 1985-2003, American Megatrends, Inc.
BIOS SETUP UTILITY
Boot
To enable or disable the
boot from network feature.
[Disabled]
[Enabled]
[On]
Select Screen
Select Item
+ - Change Option
F1 General Help
F9 Load Defaults
F10 Save and Exit
ESC Exit
®
VT8237R Plus SATA Raid BIOS Utility
BIOS SETUP UTILITY
H/W Monitor Boot Security
Install or Change the
password.
Select Screen
Select Item
Enter Change
F1 General Help
F9 Load Defaults
F10 Save and Exit
ESC Exit
3 7 3 7
3 7 3 7 3 7
Exit