Table of Contents
Advertisement
Serial ATA (SATA)
Power Cable
(Optional)
connect to the SATA HDD
power connector
USB 2.0 Header
(9-pin USB67)
(see p.9, No. 16)
Shared USB 2.0 Header
(9-pin USB4_5)
USB_PWR
(see p.9, No. 29)
Infrared Module Header
(5-pin IR1)
(see p.9, No. 6)
Internal Audio Connectors
(4-pin CD1, 4-pin AUX1)
(CD1: see p.9, No. 23)
(AUX1: see p.9, No. 24)
Front Panel Audio Header
(8-pin AUDIO1)
(see p.9, No. 22)
Please connect the black end of
SATA power cable to the power
connector on the drive. Then
connect the white end of SATA
connect to the
power cable to the power
power supply
connector of the power supply.
USB_PWR
Besides six default USB 2.0
P-7
P+7
ports on the I/O panel, there are
GND
DUMMY
two USB 2.0 headers on this
1
motherboard. Each USB 2.0
GND
P+6
header can support two USB
P-6
USB_PWR
2.0 ports. The shared USB 2.0
header (USB4_5) is shared with
USB ports 45 on the I/O panel.
1
When using the front panel USB
USB_PWR
P-5
P-4
ports by attaching the front panel
P+5
P+4
USB cable to USB4_5 header,
GND
GND
DUMMY
the USB ports 45 on the I/O panel
will not be able to function.
This header supports an optional
IRTX
+5V
DUMMY
wireless transmitting and
receiving infrared module.
1
GND
IRRX
These connectors allow you
to receive stereo audio input
CD-L
AUX-L
GND
GND
from sound sources such as
GND
GND
CD-R
AUX-R
a CD-ROM, DVD-ROM, TV
CD1
AUX1
tuner card, or MPEG card.
This is an interface for the front
GND
panel audio cable that allows
BACKOUT-R
BACKOUT-L
convenient connection and
control of audio devices.
1
AUD-OUT-L
GND
AUD-OUT-R
MIC-POWER
MIC
1 7
1 7
1 7
1 7
1 7
Advertisement
Table of Contents
