Table of Contents
Advertisement
Spread Spectrum
This item should always be [Disabled] for better system stability.
Ratio Status
This is a read-only item, which displays whether the ratio status of this
motherboard is "Locked" or "Unlocked". If it shows "Unlocked", you will find
an item Ratio CMOS Setting appears to allow you changing the ratio value
of this motherboard. If it shows "Locked", then the item Ratio CMOS Set-
ting will be hidden. If you use the ratio value to time the CPU frequency, it will
be equal to the core speed of the installed processor.
Ratio Actual Value
This is a read-only item, which displays the ratio actual value of this
motherboard.
CPU Thermal Throttling
You may select [Enabled] to enable P4 CPU internal thermal control mecha-
nism to keep the CPU from overheated.
Hyper Threading Technology
To enable this feature, it requires a computer system with an Intel Pentium
processor that supports Hyper-Threading technology and an operating sys-
tem that includes optimization for this technology, such as Microsoft
dows
®
XP. Set to [Auto] if using Microsoft
version 2.4.18 or higher. This option will be hidden if the installed CPU does
not support Hyper-Threading technology.
Max CPUID Value Limit
For Prescott CPU only, some OSes (ex. NT4.0) cannot handle the function
with disable. This should be enabled in order to boot legacy OSes that
cannot support CPUs with extended CPUID functions.
3.3.2
3.3.2 Chipset Configuration
3.3.2
3.3.2
3.3.2
Chipset Configuration
Chipset Configuration
Chipset Configuration
Chipset Configuration
BIOS SETUP UTILITY
Advanced
Chipset Configuration
DRAM Frequency
Flexibility Option
Configure DRAM Timing by SPD
DRAM CAS# Latency
Onboard VGA Selection
Aperture Size Select
OnBoard LAN
OnBoard AC'97 Audio
OnBoard MC'97 Modem
v02.54 (C) Copyright 1985-2005, American Megatrends, Inc.
®
Windows
Options
Auto
[Auto]
166MHz (DDR333)
[Disabled]
200MHz (DDR400)
[Enabled]
[Auto]
[Auto]
[256MB]
Select Screen
[Enabled]
Select Item
[Auto]
+ -
Change Option
[Auto]
F1
General Help
F9
Load Defaults
F10
Save and Exit
ESC
Exit
2 5
2 5
2 5
2 5
2 5
®
4
®
Win-
®
XP, or Linux kernel
Advertisement
Table of Contents
