Hot Plug And Hot Swap Functions For Sata / Sataii Hdds And Esataii Devices - ASROCK P45XE User Manual

2.15 Hot Plug and Hot Swap F 2.15 Hot Plug and Hot Swap Functions for SA 2.15 Hot Plug and Hot Swap F
2.15 Hot Plug and Hot Swap F 2.15 Hot Plug and Hot Swap F
HDDs and eSA HDDs and eSA HDDs and eSAT T T T T AII Devices HDDs and eSA HDDs and eSA
P45XE-WiFiN / P45XE-R supports Hot Plug and Hot Swap functions for SATA /
SATAII / eSATAII Devices in RAID / AHCI mode. P45XE supports Hot Plug and Hot
Swap functions for SATA / SATAII / eSATAII Devices in AHCI mode. Intel
ICH10 south bridge chipset provides hardware support for Advanced Host controller
Interface (AHCI), a new programming interface for SATA host controllers developed thru
a joint industry effort.
NOTE
What is Hot Plug Function?
If the SATA / SATAII HDDs are NOT set for RAID configuration, it is called
"Hot Plug" for the action to insert and remove the SATA / SATAII HDDs
while the system is still power-on and in working condition.
However, please note that it cannot perform Hot Plug if the OS has been
installed into the SATA / SATAII HDD.
What is Hot Swap Function?
If SATA / SATAII HDDs are built as RAID1 or RAID 5 then it is called "Hot
Swap" for the action to insert and remove the SATA / SATAII HDDs while
the system is still power-on and in working condition.
eSATAII is equipped with Hot Plug capability that enables you to
exchange drives easily. For example, with eSATAII interface, you may
simply plug your eSATAII devices to the eSATAII ports instead of opening
your chassis to exchange your SATAII hard disk.
unctions for SA unctions for SAT T T T T A / SA unctions for SA
unctions for SA
AII Devices AII Devices AII Devices AII Devices
4 1 4 1 4 1
4 1 4 1
A / SAT T T T T AII A / SA A / SA AII AII AII
A / SA AII
ICH10R /
®