Related Manuals for SCHUNK FPS-F5
Summary of Contents for SCHUNK FPS-F5
- Page 1 Assembly and Operating Manual FPS-F5 Electronic processor Translation of Original Operating Manual...
- Page 2 Imprint Imprint Copyright: This manual is protected by copyright. The author is SCHUNK SE & Co. KG. All rights reserved. Technical changes: We reserve the right to make alterations for the purpose of technical improvement. Document number: 15959911 Version: 01.00 | 05/06/2024 | en...
-
Page 3: Table Of Contents
6.1 Operation without software..............22 6.1.1 Operating modes of the FPS-F5 electronic processor......22 6.1.2 Changing operating modes............23 6.1.3 Position setting Closed, A, B, C, Open and tolerance ......23 01.00 | FPS-F5 | Assembly and Operating Manual | en | 15959911... - Page 4 8 Translation of the original declaration of conformity........36 9 UKCA Declaration of Conformity ..............37 10 Information on the RoHS Directive, REACH Regulation and Substances of Very High Concern (SVHC) ..................38 01.00 | FPS-F5 | Assembly and Operating Manual | en | 15959911...
-
Page 5: General
Observe the ambient conditions and operating conditions, } 2.3 [/ 7] 1.3 Scope of delivery The scope of delivery includes Electronic processor FPS-F5 in the ordered model Assembly and Operating Manual SUB-D serial connector 01.00 | FPS-F5 | Assembly and Operating Manual | en | 15959911... -
Page 6: Accessories
Flexible Position Sensor FPS-S 13 Analog magnetic switch MMS 22-A 5V Connection cables For information regarding which accessory articles can be used with the corresponding product variants, see catalog data sheet. 01.00 | FPS-F5 | Assembly and Operating Manual | en | 15959911... -
Page 7: Basic Safety Notes
Structural changes should only be made with the written approval of SCHUNK. 01.00 | FPS-F5 | Assembly and Operating Manual | en | 15959911... -
Page 8: Personnel Qualification
Before working with the product, the personnel must have read and understood the complete assembly and operating manual. Observe the national safety regulations and rules and general safety instructions. 01.00 | FPS-F5 | Assembly and Operating Manual | en | 15959911... -
Page 9: Technical Data
Ambient temperature [°C] Min. - 20 Max. + 70 Nominal voltage [VDC] Min. Max. IP rating More technical data is included in the catalog data sheet. Whichever is the latest version. 01.00 | FPS-F5 | Assembly and Operating Manual | en | 15959911... -
Page 10: Design And Description
Save button RS 232 interface and coding pin LED output signals Selection button The control and display panel is covered by a plastic lid. 01.00 | FPS-F5 | Assembly and Operating Manual | en | 15959911... -
Page 11: Description
For increased precision, calibrate the electronic processor at regular intervals. Possible sensors in Flexible Position Sensor FPS-S M8 conjunction with the Flexible Position Sensor FPS-S 13 electronic processor Analog magnetic switch MMS 22-A 5V 01.00 | FPS-F5 | Assembly and Operating Manual | en | 15959911... -
Page 12: Assembly And Settings
Check whether there is sufficient distance between the sensor and sources of interference and their supply cables. Ferromagnetic components, e.g. adapter plates made of construction steel, change the switching positions of the sensor. 01.00 | FPS-F5 | Assembly and Operating Manual | en | 15959911... -
Page 13: Mechanical Connection Fps-F5
Push the sensor (1) through the clamping holder (2) until it stops in the housing. Tighten the screws on the clamp holder (2). Connect the sensor (1) to the evaluation electronics and fasten the cable. 01.00 | FPS-F5 | Assembly and Operating Manual | en | 15959911... -
Page 14: Mechanical Connection Mms 22-A
Or: Push the sensor (1) into the groove (2) until it reaches the clamping stop. Secure the sensor (1) using the set-screw. ð Observe the maximum tightening torque of 10 Ncm. Connect the sensor (1) and fasten the cable. 01.00 | FPS-F5 | Assembly and Operating Manual | en | 15959911... -
Page 15: Electrical Connection
The connections with the designations Open, A, B, C and Closed correspond to the five switching outputs. RS 232 Coding pin Interface RS 232 Adapter RS 232 Cable assignment adapter to interface RS 232 01.00 | FPS-F5 | Assembly and Operating Manual | en | 15959911... -
Page 16: Electrical Connection Fps-S 13
Pins 2 and 3 are reversed, otherwise connection is the same as for the PC. Electrical connection Sensor connector, 3-pin connector Output connector, 12-pin connector 5.2.2 Electrical connection FPS-S 13 Type of switching: Analog 01.00 | FPS-F5 | Assembly and Operating Manual | en | 15959911... -
Page 17: Electrical Connection Fps-S M8
Connect the sensor cable to the port of the evaluation electronics and tighten the screw connection. ð Do not exceed the permitted bending radius of the cable. 5.2.4 Electrical connection MMS 22A Type of switching: Analog 01.00 | FPS-F5 | Assembly and Operating Manual | en | 15959911... - Page 18 M8 socket for 5 V Connection plug M8/M12 at 10 V Brown 5 VDC for 5 V Black Analog output + 10 to 30 VDC for 10 V Blind hole Blind hole Blue 01.00 | FPS-F5 | Assembly and Operating Manual | en | 15959911...
-
Page 19: Set Sensor Mms 22-A
The sensor returns to its state prior to the teach procedure and retains the old settings. The waiting times need to be observed without the module moving. 01.00 | FPS-F5 | Assembly and Operating Manual | en | 15959911... - Page 20 NOTE The analog signal is affected if the sensor is operated with a teach tool. After adjusting the sensor: Remove the magnet teaching tool (MT) or cable teaching tool (KT). 01.00 | FPS-F5 | Assembly and Operating Manual | en | 15959911...
-
Page 21: Commissioning Sensors With Fps-F5
ð Values are stored in the working memory of the electronic processor and activated. Disconnect the computer from the electronic processor. Normal operation is now carried out via the digital inputs or the buttons on the electronic processor. 01.00 | FPS-F5 | Assembly and Operating Manual | en | 15959911... -
Page 22: Operation
The switching positions CLOSED, A, B, C and OPEN can be programmed. A: Part A = 4 mm B: Part B = 5 mm C: Part C = 8 mm 01.00 | FPS-F5 | Assembly and Operating Manual | en | 15959911... -
Page 23: Changing Operating Modes
NOTE If only a specific position is to be saved, press the Selection button or the Selection input signal repeatedly until the desired output flashes. 01.00 | FPS-F5 | Assembly and Operating Manual | en | 15959911... -
Page 24: Operation With Software/Remote Maintenance Functionality
Change settings for the first electronic processor COM port, default setting is COM1 Port 2 Change settings for the second electronic processor COM port, default setting is COM2 01.00 | FPS-F5 | Assembly and Operating Manual | en | 15959911... -
Page 25: Connection Options
} 6.3.2 [/ 29]. Enter password if required. Select network, enter IP address 127.0.0.1 and press OK. ð The program window opens and the Programming function is displayed, } 6.3.3 [/ 29]. 01.00 | FPS-F5 | Assembly and Operating Manual | en | 15959911... - Page 26 ð Press "OK" Initialize modem to factory settings at &f --> Enter. Initialize the modem with the following five commands. ð The modem must respond to all commands with OK. 01.00 | FPS-F5 | Assembly and Operating Manual | en | 15959911...
- Page 27 IMPORTANT! If an outside line is required, a 0 must be entered before the telephone number. ð The program window opens and the Programming function is displayed, [/ 29]. } 6.3.3 01.00 | FPS-F5 | Assembly and Operating Manual | en | 15959911...
-
Page 28: Fps Controller Program
(value and pointer position) and the values of the stored switching points. The display of the lower half of the screen (5) depends on the function selected. 01.00 | FPS-F5 | Assembly and Operating Manual | en | 15959911... -
Page 29: Login Window
– Here, select Network and enter the IP address 127.0.0.1. 6.3.3 Programming function Programming function This function is used to enter and save the switching points for the electronic processor FPS-F5. 01.00 | FPS-F5 | Assembly and Operating Manual | en | 15959911... - Page 30 This results in previously taught-in parts being optimally differentiated from one another. ð From this point on, the electronic processor will work with these new switching points. 01.00 | FPS-F5 | Assembly and Operating Manual | en | 15959911...
-
Page 31: Operating Status Function
Recording function. The entire diagram can be zoomed by pressing the magnifying glass buttons. Pressing the Window button allows you to zoom into any area of the diagram. 01.00 | FPS-F5 | Assembly and Operating Manual | en | 15959911... -
Page 32: Recording Function
Recording can also be carried out without a connected computer. Here, the Save button must be pressed on the electronic processor during normal operation. 6.3.6 Calibrate function Calibrate function 01.00 | FPS-F5 | Assembly and Operating Manual | en | 15959911... - Page 33 Enter the opening width in mm and press the Learn button. Press OK. Place the gripper in the next position. Enter the opening width in mm and press the Learn button. 01.00 | FPS-F5 | Assembly and Operating Manual | en | 15959911...
-
Page 34: Service Function
You can use the Back and Forward buttons to check the reference points entered. 6.3.7 Service function Service function This window contains all the information required for support from SCHUNK. 01.00 | FPS-F5 | Assembly and Operating Manual | en | 15959911... -
Page 35: Troubleshooting
Switching lug/attachment kit for sensor not installed. Switching points not set correctly. Hardware defect on the FPS unit. 7.7 Signals A/B/C do not light up Taught correctly? Hardware defect/unit has no polarity reversal. 01.00 | FPS-F5 | Assembly and Operating Manual | en | 15959911... -
Page 36: Translation Of The Original Declaration Of Conformity
Requirements for proximity devices with analogue output (IEC 60947-5-7:2003) Signed for and on behalf of: SCHUNK SE & Co. KG Lauffen/Neckar, May 2024 i.V. Nico Peper; Director Software and Electronics; Technology & Innovation 01.00 | FPS-F5 | Assembly and Operating Manual | en | 15959911... -
Page 37: Ukca Declaration Of Conformity
Marcel Machado, address: refer to manufacturer's address Signed for and on behalf of: SCHUNK SE & Co. KG Lauffen/Neckar, May 2024 i.V. Nico Peper; Director Software and Electronics; Technology & Innovation 01.00 | FPS-F5 | Assembly and Operating Manual | en | 15959911... -
Page 38: Information On The Rohs Directive, Reach Regulation And Substances Of Very High Concern (Svhc)
"on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS)", or fulfill their intended function only as part of one. Therefore products from SCHUNK do not fall within the scope of the directive at this time. REACH Regulation Products from SCHUNK fully comply with the regulations of Regulation (EC) No. 1907/2006... - Page 39 01.00 | FPS-F5 | Assembly and Operating Manual | en | 15959911...
- Page 40 SCHUNK SE & Co. KG Spanntechnik | Greiftechnik | Automatisierungstechnik Bahnhofstr. 106 - 134 D-74348 Lauffen/Neckar Tel. +49-7133-103-0 info@de.schunk.com schunk.com Folgen Sie uns I Follow us Wir drucken nachhaltig I We print sustainable...
Need help?
Do you have a question about the FPS-F5 and is the answer not in the manual?
Questions and answers