Related Manuals for Russell Hobbs RHTH02
Summary of Contents for Russell Hobbs RHTH02
- Page 1 INSTRUCTIONS & WARRANTY MODEL NO: RHTH02 RUSSELL HOBBS TABLE HEATER WITH INFRARED SENSORS...
-
Page 2: Important Safeguards
Congratulations on purchasing our Russell Hobbs Table Heater with Infrared Sensors. Each unit is manufactured to ensure safety and reliability. Before using this appliance for the first time, please read the instruction manual carefully and keep it for future reference. - Page 3 Avoid any contact with moving parts. This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. Children should be supervised to ensure that they do not play with the appliance.
- Page 4 The manufacturer does not accept responsibility for any damage or injury caused by improper or incorrect use, or for repairs carried out by unauthorised personnel. In case of technical problems, switch off the machine and do not attempt to repair it yourself.
-
Page 5: Parts Diagram
The unit should be plugged in a socket, which is easily visible and that is within close reach. WARNING: This heater is not equipped with a device to control the room temperature. Do not use this heater in small rooms when they are occupied by persons not capable of leaving the room on their own, unless constant supervision is provided. - Page 6 ASSEMBLY INSTRUCTIONS 1. Turn the main body up-side-down (Fig. A). 2. Slide the stability ring (#6) onto the base bracket (#5) 3. Place the plug (#8) and power supply cord through the holes in the center of the base cover (#4) and base (#3). 4.
-
Page 7: Cleaning And Maintanance
heated as there is no movement detected near the infrared sensor. The infrared sensor LED will start to flash again. Note: Infrared sensing distance may differ based on reflections of different materials and colours. For example, if glass, stainless steel or aluminium reflects off the heater the sensing distance may extend to 3.5m. -
Page 8: Changing The Plug
• The unit is packed carefully back into its original packaging. • Proof of purchase is attached. • A reason is provided for why it is being returned. If the supply cord is damaged, it must be replaced by the manufacturer or an authorised service agent, in order to avoid any hazard. - Page 9 PLEASE AFFIX YOUR PROOF OF PURCHASE/RECEIPT HERE IN THE EVENT OF A CLAIM UNDER WARRANTY THIS RECEIPT MUST BE PRODUCED. 2 YEAR WARRANTY 1 year retail ⵏ 1 year extended warranty upon registration* visit www.russellhobbs.co.za W A R R A N T Y AND EXTENDED WARRANTY Home of Living Brands (Pty) Limited ("Home of Living Brands") warrants to the original purchaser of this product ("the customer") that this product will be free of defects in quality and workmanship which under normal personal, family or household use and purpose may manifest within a period of 1 (one) year from...
- Page 10 Should you need to replace an accessory during the warranty period; a claim for a free replacement will only be considered if the item (including all shards and broken parts) is returned to the nearest HOLB service centre for examination. The remains of the accessory will be carefully examined by the relevant professionals and if it is determined (at the sole discretion of HOLB) that the damage was caused by impact, then the claim will be refused and will not be covered by the warranty or any extended warranty.
Need help?
Do you have a question about the RHTH02 and is the answer not in the manual?
Questions and answers