Chipset Configuration - ASROCK N68-GS - V1.1 User Manual

TRDRD
This option appears only when you adopt AM2 CPU. Use this to adjust TRWTTD
values. Configuration options: [Auto], [2CLK], [3CLK], [4CLK] and [5CLK].
The default value is [Auto].
MA Timing
Use this to adjust values for MA timing. Configuration options: [Auto], [2T],
[1T]. The default value is [Auto].
Addr/Cmd Fine Delay
Use this to adjust values for Addr/Cmd Fine Delay feature. Configuration options:
[Auto], [No Delay], [1/64CLK] to [31/64CLK]. The default value is [Auto].
CS/ODT Fine Delay
Use this to adjust values for CS/ODT Fine Delay feature. Configuration options:
[Auto], [No Delay], [1/64CLK] to [31/64CLK]. The default value is [Auto].
Bank Interleaving
Interleaving allows memory accesses to be spread out over banks on the same
node, or accross nodes, decreasing access contention.

3 . 4 . 2 Chipset Configuration

3 . 4 . 2 3 . 4 . 2 Chipset Configuration Chipset Configuration Chipset Configuration
3 . 4 . 2 3 . 4 . 2 Chipset Configuration
BIOS SETUP UTILITY
Advanced
Chipset Settings
Onboard LAN
Onboard HD Audio
Front Panel
Share Memory
Primary Graphics Adapter
HT Bus Speed
HT Bus Width
DRAM Voltage
Chipset Voltage
CPU Thermal Throttling
v02.54 (C) Copyright 1985-2003, American Megatrends, Inc.
Onboard LAN
This allows you to enable or disable the onboard LAN feature.
Onboard HD Audio
Select [Auto], [Enabled] or [Disabled] for the onboard HD Audio feature. If you
select [Auto], the onboard HD Audio will be disabled when PCI Sound Card is
plugged.
Front Panel
Select [Auto], [Enabled] or [Disabled] for the onboard HD Audio Front Panel.
Share Memory
This allows you to set share memory feature. The default value is [Auto].
Configuration options: [Auto], [32MB], [64MB], [128MB] and [256MB].
To set DRAM Voltage.
[Enabled]
[Auto]
[Auto]
[Auto]
[PCI]
[Auto]
[Auto]
Select Screen
[Auto]
Select Item
[Auto]
+ - Change Option
[Enabled]
F1 General Help
F9 Load Defaults
F10 Save and Exit
ESC Exit
3 7 3 7 3 7 3 7 3 7