Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for turck TX707HB
Summary of Contents for turck TX707HB
- Page 1 TX700 HMI/PLC Series Instructions for Use...
-
Page 2: Table Of Contents
Slot assignment – serial interfaces.................. 20 Commissioning.......................... 21 Charging the battery.................... 21 Using the touchscreen .................... 21 Initial commissioning.................... 21 7.3.1 User management ........................ 22 V04.00 | 2024/03 | 2 Hans Turck GmbH & Co. KG | T +49 208 4952-0 | more@turck.com | www.turck.com... - Page 3 13 Disposal.............................. 33 14 Technical data........................... 34 15 Appendix: approvals and markings ..................... 40 16 Turck branches — contact data .................... 41 V04.00 | 2024/03 | 3 Hans Turck GmbH & Co. KG | T +49 208 4952-0 | more@turck.com | www.turck.com...
-
Page 4: About These Instructions
If you have any suggestions for improving the design or if some information is missing in the document, please send your suggestions to techdoc@turck.com. V04.00 | 2024/03 | 4 Hans Turck GmbH & Co. KG | T +49 208 4952-0 | more@turck.com | www.turck.com... -
Page 5: Notes On The Product
Type designation TX707-… 100002030 Year/week of production A2412 Internal version ID of the product V.: … Serial number S.N.: AA…AA V04.00 | 2024/03 | 5 Hans Turck GmbH & Co. KG | T +49 208 4952-0 | more@turck.com | www.turck.com... -
Page 6: Type Code
Connector for serial interface Mounting brackets Quick Start Guide Turck service Turck supports you in your projects – from the initial analysis right through to the commission- ing of your application. The Turck product database at www.turck.com offers you several soft- ware tools for programming, configuring or commissioning, as well as data sheets and CAD files in many export formats. -
Page 7: For Your Safety
The product is designed according to state of the art technology. Residual hazards, however, still exist. Observe the following safety instructions and warnings in order to prevent danger to persons and property. Turck accepts no liability for damage caused by failure to observe these safety instructions. -
Page 8: Note On Explosion Protection (Usa And Canada Only)
Care shall be taken not to allow layers of dust to form on the graphic panel in a way that might cause the accumulation of static charges. The devices have only been evaluated for low risk of mechanical impact. V04.00 | 2024/03 | 8 Hans Turck GmbH & Co. KG | T +49 208 4952-0 | more@turck.com | www.turck.com... -
Page 9: Product Description
8 GB Flash, 2 GB RAM Device overview Fig. 3: Dimensions TX705 Device Height (H) Width (L) Depth (C) TX705 107 mm/4.21” 147 mm/5.78” 56 mm/2.04” V04.00 | 2024/03 | 9 Hans Turck GmbH & Co. KG | T +49 208 4952-0 | more@turck.com | www.turck.com... -
Page 10: Properties And Features
CODESYS V3 PLC runtime with selection of the most important I/O protocols CODESYS V3 WebVisu or TX VisuPro WebVisu Optional extension modules for I/Os and further communication interfaces V04.00 | 2024/03 | 10 Hans Turck GmbH & Co. KG | T +49 208 4952-0 | more@turck.com | www.turck.com... -
Page 11: Functions And Operating Modes
Specification Format FAT, FAT32 Max. size Limited by FAT32 specifications ≤ 4 GB for a single file ≤ 32 GB V04.00 | 2024/03 | 11 Hans Turck GmbH & Co. KG | T +49 208 4952-0 | more@turck.com | www.turck.com... -
Page 12: Accessories
2.4 GHz and 5 GHz 100010167 TX-DP-S PROFIBUS-DP slave, 12 Mbaud 4.4.2 Power supply Type Description 100002938 TX-PSC TX power supply onnector V04.00 | 2024/03 | 12 Hans Turck GmbH & Co. KG | T +49 208 4952-0 | more@turck.com | www.turck.com... -
Page 13: Installing
The minimum tightening torque for the fixing screws of the holding clamps is 130 Ncm. The mounting brackets must rest firmly on the device. V04.00 | 2024/03 | 13 Hans Turck GmbH & Co. KG | T +49 208 4952-0 | more@turck.com | www.turck.com... -
Page 14: Fasten Devices In The Mounting Cutout
IP66 is 130 Ncm. Installing plug-in modules Fig. 7: Installing plug-in modules Fig. 8: Installing plug-in modules (e. g. TX-CAN, TX-IO-DX06) (e. g. TX-IO-XX03) V04.00 | 2024/03 | 14 Hans Turck GmbH & Co. KG | T +49 208 4952-0 | more@turck.com | www.turck.com... -
Page 15: Grounding The Device
(1 MΩ resistor with 4.7 nF capacitor connected in parallel). „ The power supply must have double or reinforced insulation. Fig. 9: Power supply – wiring V04.00 | 2024/03 | 15 Hans Turck GmbH & Co. KG | T +49 208 4952-0 | more@turck.com | www.turck.com... -
Page 16: Connecting
Serial interface Ethernet port 0 (10/100 Mbit) Ethernet port 1 (10/100 Mbit) Expansion slot for plug-in modules SD card slot V04.00 | 2024/03 | 16 Hans Turck GmbH & Co. KG | T +49 208 4952-0 | more@turck.com | www.turck.com... -
Page 17: Connecting Tx707(Hb), Tx710(Hb), Tx715 And Tx721
Fig. 12: Power supply connector TX… NOTE The power connector is part of the scope of delivery and can be ordered as spare part [} 12]. V04.00 | 2024/03 | 17 Hans Turck GmbH & Co. KG | T +49 208 4952-0 | more@turck.com | www.turck.com... -
Page 18: Connecting The Device To Ethernet
NOTE To operate in RS485, pins 1 and 2 as well as pins 3 and 4 must be connected externally. V04.00 | 2024/03 | 18 Hans Turck GmbH & Co. KG | T +49 208 4952-0 | more@turck.com | www.turck.com... -
Page 19: Connecting Plug-In Modules
TX710(HB), TX715 and TX-RS232 RS232 Serial TX721 TX-IO-DX06 Compact I/O TX-IO-XX03 Multifunction I/O 1 TX705: TX-EXTEND or other exten- sion module necessary V04.00 | 2024/03 | 19 Hans Turck GmbH & Co. KG | T +49 208 4952-0 | more@turck.com | www.turck.com... -
Page 20: Slot Assignment - Can Port
Mode COM3 COM Port 3 Slot 1 to Slot 4 refer to the extension slots on the rear of the device. V04.00 | 2024/03 | 20 Hans Turck GmbH & Co. KG | T +49 208 4952-0 | more@turck.com | www.turck.com... -
Page 21: Commissioning
IP address is therefore set via the system settings on the touch screen of the device, via a DHCP server in the network, via the Turck Automation Suite (TAS) or via the Turck Service Tool. V04.00 | 2024/03 | 21... -
Page 22: User Management
If the simple link causes a conflict with an already active WebVisu application, the system set- tings can also be accessed directly via the following link: https://IP/machine_config Example access: https://192.168.1.24/machine_config Username: admin Password: admin V04.00 | 2024/03 | 22 Hans Turck GmbH & Co. KG | T +49 208 4952-0 | more@turck.com | www.turck.com... -
Page 23: Setting The Ip Address
The IP address can be set via the system settings on the touch screen of the device or via the device’s web server. The IP address via which the device is connected to the PC via Ethernet can also be set via the Turck Service Tool or via the Turck Automation Suite (TAS). 7.5.1 Setting the IP address via the web server „... -
Page 24: Setting The Ip Address Via Turck Service Tool
Turck Service Tool shows the connected devices. NOTE Clicking the device's IP address opens the web server. Fig. 21: Turck Service Tool – found devices V04.00 | 2024/03 | 24 Hans Turck GmbH & Co. KG | T +49 208 4952-0 | more@turck.com | www.turck.com... -
Page 25: Setting The Ip Address Via Tas (Turck Automation Suite)
Fig. 23: Turck Automation Suite: Scan network The Turck Automation Suite shows the connected devices. Fig. 24: Turck Automation Suite: found devices V04.00 | 2024/03 | 25 Hans Turck GmbH & Co. KG | T +49 208 4952-0 | more@turck.com | www.turck.com... -
Page 26: Programming With Codesys
EtherCAT OPC-UA 7.6.2 Access to the CODESYS WebVisu The CODESYS WebVisu is accessed via port 8085: http://<<IP address>>:8085/webvisu.htm Example: http://192.168.1.40:8085/webvisu.htm V04.00 | 2024/03 | 26 Hans Turck GmbH & Co. KG | T +49 208 4952-0 | more@turck.com | www.turck.com... -
Page 27: Programming With Tx Visupro
Project transfer via a USB stick „ Create an update package with TX VisuPro and copy it to a USB stick. V04.00 | 2024/03 | 27 Hans Turck GmbH & Co. KG | T +49 208 4952-0 | more@turck.com | www.turck.com... -
Page 28: Configuring
Press and hold the unused area of the touch screen for at least running 2 s. „ Open the context menu and select “System Settings”. V04.00 | 2024/03 | 28 Hans Turck GmbH & Co. KG | T +49 208 4952-0 | more@turck.com | www.turck.com... - Page 29 Configuring the automatic backlight, adjusting the brightness, chan- ging the display orientation Fonts Shows the currently used fonts and enables the installation of user- defined fonts. V04.00 | 2024/03 | 29 Hans Turck GmbH & Co. KG | T +49 208 4952-0 | more@turck.com | www.turck.com...
- Page 30 By default, the device is restarted in user mode via the "Main OS" op- tion. The "Configuration OS" option restarts the device directly in System Settings in System Mode. V04.00 | 2024/03 | 30 Hans Turck GmbH & Co. KG | T +49 208 4952-0 | more@turck.com | www.turck.com...
-
Page 31: Operating
LED orange (left LED) Meaning No Ethernet connection Ethernet connection established LED green (right LED) Meaning No data transfer Flashing Data transfer V04.00 | 2024/03 | 31 Hans Turck GmbH & Co. KG | T +49 208 4952-0 | more@turck.com | www.turck.com... -
Page 32: Troubleshooting
If there are no faults, there is a device malfunction. In this case, decommission the device and replace it with a new device of the same type. V04.00 | 2024/03 | 32 Hans Turck GmbH & Co. KG | T +49 208 4952-0 | more@turck.com | www.turck.com... -
Page 33: Maintenance
The device the lithium battery must be disposed of properly in accordance with WEEE Directive 2012/19/EU and does not belong in normal household waste. V04.00 | 2024/03 | 33 Hans Turck GmbH & Co. KG | T +49 208 4952-0 | more@turck.com | www.turck.com... -
Page 34: Technical Data
2 × Host V2.0, max. 500 mA max. 500 mA SD card Extension slot (plug-in) Max. number of plug-in modules V04.00 | 2024/03 | 34 Hans Turck GmbH & Co. KG | T +49 208 4952-0 | more@turck.com | www.turck.com... - Page 35 63 kByte 63 kByte 63 kByte Interfaces Ethernet ports 3 × 10/100 Mbit 3 × 10/100 Mbit 3 × 10/100 Mbit V04.00 | 2024/03 | 35 Hans Turck GmbH & Co. KG | T +49 208 4952-0 | more@turck.com | www.turck.com...
- Page 36 USB/SD card Real Time Clock Yes (battery-backed) Yes (battery-backed) Accuracy RTC < 100 ppm < 100 ppm (at 25 °C) Buzzer V04.00 | 2024/03 | 36 Hans Turck GmbH & Co. KG | T +49 208 4952-0 | more@turck.com | www.turck.com...
- Page 37 10 ms voltage dips, the minimum power supply voltage is 18 VDC. Degree of protection according to EN 60529 Device front IP66 Device rear IP20 V04.00 | 2024/03 | 37 Hans Turck GmbH & Co. KG | T +49 208 4952-0 | more@turck.com | www.turck.com...
- Page 38 Port: DC mains 0 %, duration: 10 ms, 20 fields × 1 s Test executed on the 24Vdc of the EUT EN 61000-4-29 V04.00 | 2024/03 | 38 Hans Turck GmbH & Co. KG | T +49 208 4952-0 | more@turck.com | www.turck.com...
- Page 39 (landscape format). Fig. 27: Viewing angle Viewing angle From the top From the bottom From the left From the right V04.00 | 2024/03 | 39 Hans Turck GmbH & Co. KG | T +49 208 4952-0 | more@turck.com | www.turck.com...
-
Page 40: Appendix: Approvals And Markings
Declarations of conformity (current version) cULus File No. E484727 File No. E484803 Class I, Division 2, Groups A, B, C and D TAA000027Z V04.00 | 2024/03 | 40 Hans Turck GmbH & Co. KG | T +49 208 4952-0 | more@turck.com | www.turck.com... -
Page 41: Turck Branches - Contact Data
Via San Domenico 5, IT-20008 Bareggio (MI) www.turckbanner.it Japan TURCK Japan Corporation ISM Akihabara 1F, 1-24-2, Taito, Taito-ku, 110-0016 Tokyo www.turck.jp V04.00 | 2024/03 | 41 Hans Turck GmbH & Co. KG | T +49 208 4952-0 | more@turck.com | www.turck.com... - Page 42 United Kingdom TURCK BANNER LIMITED Blenheim House, Hurricane Way, GB-SS11 8YT Wickford, Essex www.turckbanner.co.uk Turck Inc. 3000 Campus Drive, USA-MN 55441 Minneapolis www.turck.us V04.00 | 2024/03 | 42 Hans Turck GmbH & Co. KG | T +49 208 4952-0 | more@turck.com | www.turck.com...
- Page 43 Over 30 subsidiaries and 60 representations worldwide! 100002669 | 2024/03 100002669 www.turck.com...
Need help?
Do you have a question about the TX707HB and is the answer not in the manual?
Questions and answers