Table of Contents
Advertisement
Game Port Header
(15-pin GAME1)
(see p.8 No. 19)
2.7
Serial ATA (SATA) Hard Disks Installation
This motherboard supports Serial ATA (SATA) hard disks and RAID functions. This
section will guide you to install the SATA hard disks.
STEP 1: Install the SATA hard disks into the drive bays of your chassis.
STEP 2: Connect the SATA power cable to the SATA hard disk.
STEP 3: Connect one end of the SATA data cable to the motherboard's SATA
connector.
STEP 4: Connect the other end of the SATA data cable to the SATA hard disk.
2.8
Hot Plug Function for SATA HDDs
K8Upgrade-760GX motherboard supports Hot Plug function for SATA devices.
What is Hot Plug Function?
If the SATA HDDs are NOT set for RAID configuration, it is called "Hot
Plug" for the action to insert and remove the SATA HDDs while the
system is still power-on and in working condition. However, please note
that it cannot perform Hot Plug if the OS has been installed into the SATA
HDD.
WARNING!
Although this motherboard supports Hot Plug function for SATA devices,
there are still some limitation. Please ensure to read the instruction in the
Support CD before you use Hot Plug function. Failure to do so may lose
the data in the SATA HDDs or damage the SATA HDDs. For the detailed
instruction, please refer to the document in the Support CD at the
following path:
..\ RAID BIOS Setting Utility
+5V
JBB1
JBX
MIDI_OUT
JBY
JBB2
MIDI_IN
1
+5V
JAB2
JAY
GND
GND
JAX
JAB1
+5V
Connect a Game cable to this
header if the Game port bracket
is installed.
Advertisement
Table of Contents
