Table of Contents
Advertisement
Serial ATA (SATA)
Power Cable
(Optional)
connect to the SATA HDD
USB 2.0 Header
(9-pin USB67)
(see p.8 No. 21)
Shared USB 2.0 Header
(9-pin USB45)
(see p.8 No. 34)
Infrared Module Header
(5-pin IR1)
(see p.8 No. 9)
Internal Audio Connectors
(4-pin CD1, 4-pin AUX1)
(CD1: see p.8 No. 33)
(AUX1: see p.8 No. 32)
Front Panel Audio Header
(9-pin AUDIO1)
(see p.8 No. 30)
power connector
connect to the
power supply
USB_PWR
P-6
P+6
GND
1
GND
P+7
P-7
USB_PWR
1
USB_PWR
P-4
P+4
GND
IRTX
+5V
DUMMY
1
GND
IRRX
CD-R
GND
GND
CD-L
AUX-R
GND
GND
AUX-L
GND
+5VA
BACKOUT-R
1
AUD-OUT-R
MIC-POWER
MIC
Please connect the black end of
SATA power cable to the power
connector on each drive. Then
connect the white end of SATA
power cable to the power
connector of the power supply.
ASRock I/O Plus
dates 6 default USB 2.0 ports. If
DUMMY
those USB 2.0 ports on the I/O
panel are not sufficient, this
USB 2.0 header is available to
support 2 additional USB 2.0
ports.
This USB45 header is shared
USB_PWR
with the USB 2.0 ports 4,5 on
P-5
P+5
ASRock I/O Plus
GND
DUMMY
the front panel USB ports by
attaching the front panel USB
cable to this header (USB45), the
USB ports 4,5 on ASRock I/O
TM
Plus
will not be able to function.
This header supports an
optional wireless transmitting
and receiving infrared module.
These connectors allow you
CD1
to receive stereo audio input
from sound sources such as
a CD-ROM, DVD-ROM, TV
AUX1
tuner card, or MPEG card.
This is an interface for front
panel audio cable that allows
BACKOUT-L
convenient connection and
control of audio devices.
AUD-OUT-L
GND
TM
accommo-
TM
. When using
Advertisement
Table of Contents
