ASROCK K7VT6 User Manual page 28

Peripheral Configuration
Advanced
Peripheral Configuration
OnBoard FDC
OnBoard Serial Port
OnBoard Parallel Port
Parallel Port Mode
EPP Version
Parallel Port IRQ
Parallel Port DMA Channel
OnBoard Midi Port
Midi IRQ Select
OnBoard Game Port
OnBoard IDE
OnBoard LAN
OnBoard AC' 97 Audio
F1:Help
Esc:Previous Menu
OnBoard FDC
Use this to enable or disable floppy drive controller.
OnBoard Serial Port
Use this to set addresses for the onboard serial ports or disable serial ports.
Configuration options: [Auto], [Disabled], [3F8 / IRQ4 / COM1],
[2F8 / IRQ3 / COM2], [3E8 / IRQ4 / COM3], [2E8 / IRQ3 / COM4].
OnBoard Parallel Port
Select Parallel Port address or disable Parallel Port. Configuration options: [Auto],
[Disabled], [378], [278].
Parallel Port Mode
Set the operation mode of the parallel port. The default value is [ECP+EPP]. If
this option is set to [ECP+EPP], it will show the EPP version in the following
item, "EPP Version".
OnBoard Midi Port
Select address for Midi Port or disable Midi Port. Configuration options: [Disabled],
[330], [300], [290], [292].
Midi IRQ Select
Use this to select Midi IRQ. Configuration options: [3], [4], [5], [7], [10], [11].
OnBoard Game Port
Select address for Game Port or disable Game Port. Configuration options:
[Disabled], [200h], [208h].
OnBoard IDE
This allows you to enable or disable the onboard IDE controller.
AMIBIOS SETUP UTILITY - VERSION 3.31a
Auto
Auto
Auto
ECP+EPP
1.9
Auto
Auto
Disabled
5
200h
Enabled
Enabled
Auto
:Select Item +/-:Change Values
Enter:Select
[ Setup Help ]
<Enter> to enable or
disable the floppy
drive controller.
F9:Setup Defaults
F10:Save & Exit
Sub-Menu