Table of Contents
Advertisement
Serial ATA (SATA)
Power Cable
connect to the SATA HDD
(Optional)
USB 2.0 Header
(9-pin USB67)
(see p.7 item 18)
Shared USB 2.0 Header
(9-pin JUSB45)
(see p.7 item 28)
Internal Audio Connectors
(4-pin CD1, 4-pin AUX1)
(CD1: see p.7 item 20)
(AUX1: see p.7 item 21)
Front Panel Audio Connector
(9-pin AUDIO1)
(see p.7 item 24)
power connector
connect to the
power supply
USB_PWR
P-7
P+7
GND
DUMMY
1
GND
P+6
P-6
USB_PWR
1
USB_PWR
P-4
P+4
GND
AUX-R
CD-R
GND
GND
GND
GND
AUX-L
CD-L
AUX1
GND
+5VA
BACKOUT-R
1
DUMMY
AUD-OUT-R
MIC-POWER
MIC
Please connect the black end of
SATA power cable to the power
connector on the drive. Then
connect the white end of SATA
power cable to the power
connector of the power supply.
ASRock I/O Plus
6 ready-to-use USB 2.0 ports on
the rear panel. If the rear USB
ports are not sufficient, this
USB 2.0 header is available to
support 2 extra USB 2.0 ports.
This USB45 connector is shared
USB_PWR
with the USB 2.0 ports 4,5 on
P-5
P+5
ASRock I/O Plus
GND
DUMMY
the front panel USB ports by
attaching the front panel USB
cable to this connector
(JUSB45), the USB ports 4,5 on
ASRock I/O Plus
to function.
These connectors allow you to
receive stereo audio input from
sound sources such as a CD-
CD1
ROM, DVD-ROM, TV tuner card,
or MPEG card.
This is an interface for front panel
audio cable that allows conve-
BACKOUT-L
nient connection and control of
audio devices.
AUD-OUT-L
TM
provides you
TM
. When using
TM
will not be able
Advertisement
Table of Contents
