Pcipnp Configuration; Floppy Configuration - ASROCK K7V88 - VERSION 1.0 User Manual

3.3.5 PCIPnP Configuration

Advanced
PCI / PnP Configuration
PCI Latency Timer
PCI IDE BusMaster
v02.54 (C) Copyright 1985-2003, American Megatrends, Inc.
PCI Latency Timer
The default value is 32. It is recommended to keep the default value unless
the installed PCI expansion cards' specifications require other settings.
PCI IDE BusMaster
Use this item to enable or disable the PCI IDE BusMaster feature.

3.3.6 Floppy Configuration

In this section, you may configure the type of your floppy drive.
Advanced
Floppy Configuration
Floppy A
Floppy B
v02.54 (C) Copyright 1985-2003, American Megatrends, Inc.
BIOS SETUP UTILITY
[32]
[Enabled]
BIOS SETUP UTILITY
[1.44 MB 3 "] 1
2
[Disabled]
Value in units of PCI
clocks for PCI device
latency timer
register.
Select Screen
Select Item
+- Change Option
F1 General Help
F9 Load Defaults
F10 Save and Exit
ESC Exit
Select the type of
floppy drive
connected to the
system.
Select Screen
Select Item
+- Change Option
F1 General Help
F9 Load Defaults
F10 Save and Exit
ESC Exit