Table of Contents
Advertisement
Serial ATA (SATA)
Power Cable
(Optional)
connect to the SATA HDD
USB 2.0 Header
(9-pin USB67)
(see p.8, No. 22)
Shared USB 2.0 Header
(9-pin USB45)
(see p.8, No. 34)
Infrared Module Header
(5-pin IR1)
(see p.8, No. 24)
Internal Audio Connectors
(4-pin CD1, 4-pin AUX1)
(CD1: see p.8, No. 33)
(AUX1: see p.8, No. 32)
Front Panel Audio Header
(9-pin AUDIO1)
(see p.8, No. 28)
power connector
connect to the
power supply
USB_PWR
P-7
P+7
GND
DUMMY
1
GND
P+6
P-6
USB_PWR
1
USB_PWR
USB_PWR
P-4
P-5
P+4
P+5
GND
GND
DUMMY
IRTX
+5V
DUMMY
1
GND
IRRX
CD-R
GND
CD1
GND
CD-L
AUX-R
GND
AUX1
GND
AUX-L
GND
+5VA
BACKOUT-R
BACKOUT-L
1
GND
AUD-OUT-R
MIC-POWER
MIC
Please connect the black end of
SATA power cable to the power
connector on the drive. Then
connect the white end of SATA
power cable to the power
connector of the power supply.
ASRock I/O Plus
6 ready-to-use USB 2.0 ports on
the rear panel. If the rear USB
ports are not sufficient, this
USB 2.0 header is available to
support 2 extra USB 2.0 ports.
This USB45 connector is shared
with the USB 2.0 ports 4,5 on
ASRock I/O Plus
the front panel USB ports by
attaching the front panel USB
cable to this connector
(USB45), the USB ports 4,5 on
ASRock I/O Plus
to function.
This header supports an optional
wireless transmitting and
receiving infrared module.
These connectors allow you
to receive stereo audio input
from sound sources such as
a CD-ROM, DVD-ROM, TV
tuner card, or MPEG card.
This is an interface for the front
panel audio cable that allows
convenient connection and
control of audio devices.
AUD-OUT-L
TM
provides you
TM
. When using
TM
will not be able
Advertisement
Table of Contents
