ROOMS TO GO Windleaf B113-43 Assembly Instructions

ASSEMBLY
INSTRUCTIONS
Thank you for purchasing this quality product. Place all wooden parts on a clean and smooth surface such
as a rug or carpet to avoid the parts from being scratched. Be sure to check all packing materials carefully
for small parts may have come loose inside the carton during shipment, clarify and count all parts and
compare with the parts list below. Do not tighten all screws / bolts until all completely assembled.
Part List
Description
No.
Night Stand
A
Leg
B
NOTE: YOU WILL ALSO NEED A SCREWDRIVER (NOT PROVIDED)
These parts are cumbersome and heavy. Therefore, two people are recommended in order to prevent
personal injury and insure the parts are not damaged during the assembly.
Important Notes
*Keep all hardware parts out of reach
of children!
*Tighten screws periodically! With the
use of this product bolts and screws
may become loose over time!
*Don't attempt to modify parts!
B
Cleaning instruction: Clean using soft cloth
Q.ty. Description
No.
1 PC 1 JCBC Bolt
4 PCS 2 Flat Washer
Allen Key
3
4 Wood Button
A
Page 1 / 2
ITEM NO.: B113-43
Night Stand
Hardware List
Sketch Size
M6 x 30mm
M6 x 13mm
M4
M15
Made in Malaysia
Q.ty.
8 PCS
8 PCS
1 PC
8 PCS