Table of Contents
Advertisement
TWRWR
This option appears only when you adopt AM2 CPU. Use this to adjust TWRWR
values. Configuration options: [Auto], [1CLK], [2CLK] and [3CLK]. The default
value is [Auto].
TRDRD
This option appears only when you adopt AM2 CPU. Use this to adjust TRWTTD
values. Configuration options: [Auto], [2CLK], [3CLK], [4CLK] and [5CLK].
The default value is [Auto].
MA Timing
Use this to adjust values for MA timing. Configuration options: [Auto], [2T],
[1T]. The default value is [Auto].
Addr/Cmd Fine Delay
Use this to adjust values for Addr/Cmd Fine Delay feature. Configuration options:
[Auto], [No Delay], [1/64CLK] to [31/64CLK]. The default value is [Auto].
CS/ODT Fine Delay
Use this to adjust values for CS/ODT Fine Delay feature. Configuration options:
[Auto], [No Delay], [1/64CLK] to [31/64CLK]. The default value is [Auto].
Bank Interleaving
Interleaving allows memory accesses to be spread out over banks on the same
node, or accross nodes, decreasing access contention.
3 . 3 . 2
3 . 3 . 2
Chipset Configuration
Chipset Configuration
3 . 3 . 2
3 . 3 . 2 Chipset Configuration
3 . 3 . 2
Chipset Configuration
Chipset Configuration
BIOS SETUP UTILITY
Advanced
Chipset Settings
Onboard LAN
Onboard 1394
Onboard HD Audio
Front Panel
Hybrid SLI
Primary
Graphics Adapter
CPU - NB Link Speed
CPU - NB Link Width
DRAM Voltage
Chipset Core Voltage
HT Voltage
v02.54 (C) Copyright 1985-2003, American Megatrends, Inc.
Onboard LAN
This allows you to enable or disable the onboard LAN feature.
Onboard 1394
This allows you to enable or disable the onboard 1394 feature.
Onboard HD Audio
Select [Auto], [Enabled] or [Disabled] for the onboard HD Audio feature. If you
select [Auto], the onboard HD Audio will be disabled when PCI Sound Card is
plugged.
To set DRAM Voltage.
[Enabled]
[Enabled]
[Auto]
[Auto]
[Disabled]
[PCI]
[Auto]
[Auto]
Select Screen
Select Item
[Auto]
+ -
Change Option
[Auto]
F1
General Help
F9
Load Defaults
[Auto]
F10
Save and Exit
ESC
Exit
5 0
5 0
5 0
5 0
5 0
Advertisement
Table of Contents
