ASROCK K10N78D Installation Manual
Hide thumbs Also See for K10N78D:

Advertisement

Copyright Notice:
Copyright Notice:
Copyright Notice:
Copyright Notice:
Copyright Notice:
No part of this installation guide may be reproduced, transcribed, transmitted, or trans-
lated in any language, in any form or by any means, except duplication of documen-
tation by the purchaser for backup purpose, without written consent of ASRock Inc.
Products and corporate names appearing in this guide may or may not be registered
trademarks or copyrights of their respective companies, and are used only for identifica-
tion or explanation and to the owners' benefit, without intent to infringe.
Disclaimer:
Disclaimer:
Disclaimer:
Disclaimer:
Disclaimer:
Specifications and information contained in this guide are furnished for informational
use only and subject to change without notice, and should not be constructed as a
commitment by ASRock. ASRock assumes no responsibility for any errors or omissions
that may appear in this guide.
With respect to the contents of this guide, ASRock does not provide warranty of any kind,
either expressed or implied, including but not limited to the implied warranties or
conditions of merchantability or fitness for a particular purpose. In no event shall
ASRock, its directors, officers, employees, or agents be liable for any indirect, special,
incidental, or consequential damages (including damages for loss of profits, loss of
business, loss of data, interruption of business and the like), even if ASRock has been
advised of the possibility of such damages arising from any defect or error in the guide
or product.
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.
CALIFORNIA, USA ONLY
The Lithium battery adopted on this motherboard contains Perchlorate, a toxic
substance controlled in Perchlorate Best Management Practices (BMP) regulations
passed by the California Legislature. When you discard the Lithium battery in
California, USA, please follow the related regulations in advance.
"Perchlorate Material-special handling may apply, see
www.dtsc.ca.gov/hazardouswaste/perchlorate"
ASRock Website: http://www.asrock.com
Copyright©2009 ASRock INC. All rights reserved.
ASRock
Published April 2009
K10N78D
Motherboard
1 1 1 1 1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the K10N78D and is the answer not in the manual?

Questions and answers

Summary of Contents for ASROCK K10N78D

  • Page 1 ASRock. ASRock assumes no responsibility for any errors or omissions that may appear in this guide. With respect to the contents of this guide, ASRock does not provide warranty of any kind, either expressed or implied, including but not limited to the implied warranties or conditions of merchantability or fitness for a particular purpose.
  • Page 2: Motherboard Layout

    CPU Heatsink Retention Module NB Fan Connector (NB_FAN1) AM2 940-Pin CPU Socket System Panel Header (PANEL1, Orange) 2 x 240-pin DDR2 DIMM Slots Serial Port Connector (COM1) (Dual Channel A: DDRII_1, DDRII_2; Yellow) Floppy Connector (FLOPPY1) 2 x 240-pin DDR2 DIMM Slots Front Panel Audio Header (Dual Channel B: DDRII_3, DDRII_4;...
  • Page 3 Coaxial SPDIF Out Port ** 7 Front Speaker (Lime) PS/2 Keyboard Port (Purple) * There are two LED next to the LAN port. Please refer to the table below for the LAN port LED indications. LAN Port LED Indications ACT/LINK...
  • Page 4 To enable Multi-Streaming function, you need to connect a front panel audio cable to the front panel audio header. After restarting your computer, you will find “VIA HD Audio Deck” tool on your system. Please follow below instructions according to the OS you install.
  • Page 5: Package Contents

    This Quick Installation Guide contains introduction of the motherboard and step-by- step installation guide. More detailed information of the motherboard can be found in the user manual presented in the Support CD. Because the motherboard specifications and the BIOS software might be updated, the content of this manual will be subject to change without notice.
  • Page 6: Specifications

    - Solid Capacitor for CPU power - Support for Socket AM2+ / AM2 processors: AMD Phenom FX / Phenom / Athlon 64 FX / Athlon 64 X2 Dual-Core / Athlon X2 Dual-Core / Athlon 64 / Sempron processor - Support for AM3 processors: AMD Phenom...
  • Page 7 - 24 pin ATX power connector - 4 pin 12V power connector - CD in header - Front panel audio connector - 3 x USB 2.0 headers (support 6 USB 2.0 ports) (see CAUTION 7) BIOS Feature - 8Mb AMI BIOS - AMI Legal BIOS - Supports “Plug and Play”...
  • Page 8 Before installing SATAII hard disk to SATAII connector, please read the “SATAII Hard Disk Setup Guide” on page 24 of “User Manual” in the support CD to adjust your SATAII hard disk drive to SATAII mode. You can also connect SATA hard disk to SATAII connector directly.
  • Page 9 ® . With this utility, you can press <F6> key during the POST or press <F2> key to BIOS setup menu to access ASRock Instant Flash. Just launch this tool and save the new BIOS file to your USB flash drive, floppy disk or hard drive, then you can update your BIOS only in a few clicks without prepar- ing an additional floppy diskette or other complicated flash utility.
  • Page 10: Pre-Installation Precautions

    Installation Installation Installation This is an ATX form factor (12.0-in x 7.5-in, 30.5 cm x 19.1 cm) motherboard. Before you install the motherboard, study the configuration of your chassis to en- sure that the motherboard fits into it. Pre-installation Precautions...
  • Page 11: Installation Of Cpu Fan And Heatsink

    Step 4. When the CPU is in place, press it firmly on the socket while you push down the socket lever to secure the CPU. The lever clicks on the side tab to indicate that it is locked.
  • Page 12: Installation Of Memory Modules (Dimm)

    (the same brand, speed, size and chip- type) DDR2 DIMM pair in the slots of the same color. In other words, you have to install identical DDR2 DIMM pair in Dual Channel A (DDRII_1 and DDRII_2;...
  • Page 13: Installing A Dimm

    Unlock a DIMM slot by pressing the retaining clips outward. Step 2. Align a DIMM on the slot such that the notch on the DIMM matches the break on the slot. The DIMM only fits in one correct orientation. It will cause permanent damage to the motherboard and the DIMM if you force the DIMM into the slot at incorrect orientation.
  • Page 14: Installing An Expansion Card

    2.4 Expansion Slots (PCI and PCI Express Slots) 2.4 Expansion Slots (PCI and PCI Express Slots) There are 3 PCI slots and 4 PCI Express slots on this motherboard. PCI slots: PCI slots are used to install expansion cards that have the 32-bit PCI interface. PCIE slots: PCIE1 / PCIE3 / PCIE4 (PCIE x1 slot;...
  • Page 15: Jumpers Setup

    After waiting for 15 seconds, use a jumper cap to short pin2 and pin3 on CLRCMOS1 for 5 seconds. However, please do not clear the CMOS right after you update the BIOS.
  • Page 16: Onboard Headers And Connectors

    Floppy Connector (33-pin FLOPPY1) (see p.2, No. 23) the red-striped side to Pin1 Note: Make sure the red-striped side of the cable is plugged into Pin1 side of the connector. Primary IDE connector (Blue) (39-pin IDE1, see p.2, No. 8)
  • Page 17 HDA to function correctly. Please follow the instruction in our manual and chassis manual to install your system. 2. If you use AC’97 audio panel, please install it to the front panel audio header as below:...
  • Page 18 Though this motherboard provides 4-Pin CPU fan (Quiet Fan) support, the 3-Pin CPU fan still can work successfully even without the fan speed control function. If you plan to connect the 3-Pin CPU fan to the CPU fan connector on this motherboard, please connect it to Pin 1-3.
  • Page 19 Though this motherboard provides 24-pin ATX power connector, it can still work if you adopt a traditional 20-pin ATX power supply. To use the 20-pin ATX power supply, please plug your power supply along with Pin 1 and Pin 13.
  • Page 20 Driver Installation Guide Driver Installation Guide To install the drivers to your system, please insert the support CD to your optical drive first. Then, the drivers compatible to your system can be auto-detected and listed on the support CD driver page. Please follow the order from up to bottom side to install those required drivers.
  • Page 21: Installing Windows

    64-bit OS on your system. When you see “Where do you want to install Windows?” page, please insert the ASRock Support CD into your optical drive, ® and click the “Load Driver” button on the left on the bottom to load the NVIDIA AHCI ®...
  • Page 22: Installing Windows Vista

    Untied Overclocking function, please enter “Overclock Mode” option of BIOS setup to set the selection from [Auto] to [CPU, PCIE, Async.]. Therefore, CPU FSB is untied during overclocking, but PCI / PCIE buses are in the fixed mode so that FSB can operate under a more stable overclocking environment.
  • Page 23: Bios Information

    To begin using the Support CD, insert the CD into your CD-ROM drive. It will display the Main Menu automatically if “AUTORUN” is enabled in your computer. If the Main Menu does not appear automatically, locate and double-click on the file “ASSETUP.
  • Page 24 1. Einführung 1. Einführung 1. Einführung Wir danken Ihnen für den Kauf des ASRock K10N78D Motherboard, ein zuverlässiges Produkt, welches unter den ständigen, strengen Qualitätskontrollen von ASRock gefertigt wurde. Es bietet Ihnen exzellente Leistung und robustes Design, gemäß der Verpflichtung von ASRock zu Qualität und Halbarkeit.
  • Page 25: Spezifikationen

    - 1 x Koaxial-SPDIF-Ausgang - 1 x optischer SPDIF-Ausgang - 6 x Standard-USB 2.0-Anschlüsse - 1 x RJ-45 LAN Port mit LED (ACT/LINK LED und SPEED LED) - HD Audiobuchse: Lautsprecher seitlich / Lautsprecher hinten / Mitte/Bass / Audioeingang/ Lautsprecher vorne / Mikrofon...
  • Page 26 Anschlüsse - 6 x SATAII-Anschlüsse, unterstützt bis 3.0 Gb/s Datenübertragungsrate, unterstützt RAID (RAID 0, RAID 1, RAID 0+1, RAID 5 und JBOD), NCQ, AHCI und “Hot Plug” Funktionen (siehe VORSICHT 6) - 1 x ATA133 IDE-Anschlüsse (Unterstützt bis 2 IDE-Geräte) - 1 x FDD-Anschlüsse...
  • Page 27 Beachten Sie bitte, dass Overclocking, einschließlich der Einstellung im BIOS, Anwenden der Untied Overclocking-Technologie oder Verwenden von Overclocking-Werkzeugen von Dritten, mit einem gewissen Risiko behaftet ist. Overclocking kann sich nachteilig auf die Stabilität Ihres Systems auswirken oder sogar Komponenten und Geräte Ihres Systems beschädigen.
  • Page 28 Intelligent Energy Saver eine revolutionäre Technologie zur bisher unerreichten Energieeinsparung. Ein Spannungsregler kann die Anzahl von Ausgangsphasen zur Effektivitätsverbessserung reduzieren, wenn sich die CPU im Leerlauf befindet. Mit anderen Worten: Sie genießen außergewöhnliche Energieeinsparung und verbesserten Wirkungsgrad ohne Leistungseinschränkungen. Wenn Sie die Intelligent Energy Saver-Funktion nutzen möchten, aktivieren Sie zuvor die „Cool...
  • Page 29 Übertaktungstechnologie. Wenn Sie diese Funktion im BIOS-Setup aktivieren, wird die Arbeitsspeicherleistung um bis zu 12,5% gesteigert. Die Wirkung hängt aber von der verwendeten AM2 CPU ab. Diese Funktion übertaktet die Standardfrequenz des Chipsatz und der CPU. Dennoch gewähren wir die Systemstabilität nicht bei allen CPU/DRAM- Konfigurationen.
  • Page 30: Einstellung Der Jumper

    +5VSB (Standby) zu setzen (siehe S.2, Punkt 1) und die PS/2 oder USB- Weckfunktionen zu aktivieren. Hinweis: Um +5VSB nutzen zu können, muss das Netzteil auf dieser Leitung 2A oder mehr leisten können. CMOS löschen (CLRCMOS1, 3-Pin jumper) (siehe S.2, Punkt 30)
  • Page 31 (33-Pin FLOPPY1) die rotgestreifte Seite auf Stift 1 (siehe S.2, Punkt 23) Hinweis: Achten Sie darauf, dass die rotgestreifte Seite des Kabel mit der Stift 1- Seite des Anschlusses verbunden wird. Primärer IDE-Anschluss (blau) (39-pin IDE1, siehe S.2, Punkt 8)
  • Page 32 Serial ATA- (SATA-) Verbinden Sie das schwarze Stromversorgungskabel Ende des SATA-Netzkabels mit dem Netzanschluss am (Option) Laufwerk. Verbinden Sie dann Verbindung zum das weiße Ende des SATA- SATA-HDD-Stromanschluss Stromversorgungskabels mit Verbindung zum Netzteil dem Stromanschluss des Netzteils. USB 2.0-Header Zusätzlich zu den sechs üblichen USB 2.0-Ports an den...
  • Page 33 Geräte), wobei jedoch die Bildschirmverdrahtung am Gehäuse HDA unterstützen muss, um richtig zu funktionieren. Beachten Sie bei der Installation im System die Anweisungen in unserem Handbuch und im Gehäusehandbuch. 2. Wenn Sie die AC’97-Audioleiste verwenden, installieren Sie diese wie nachstehend beschrieben an der Front-Audioanschlussleiste: A.
  • Page 34 Obwohl dieses Motherboard einen 24-pol. ATX-Stromanschluss bietet, kann es auch mit einem modifizierten traditionellen 20-pol. ATX-Netzteil verwendet werden. Um ein 20-pol. ATX-Netzteil zu verwenden, stecken Sie den Stecker mit Pin 1 und Pin 13 ein. Installation eines 20-pol. ATX-Netzteils Anschluss für...
  • Page 35 Ende (A) des (Option) HDMI_SPDIF-Kabels mit dem HDMI_SPDIF-Anschluss am Motherboard. Schließen Sie dann das weiße Ende (B oder zteils C) des HDMI_SPDIF-Kabels an den HDMI_SPDIF-Anschluss der HDMI-VGA-Karte an. A. Schwarzes Ende B. Weißes Ende (zweipolig) C. Weißes Ende (dreipolig) ASRock K10N78D Motherboard...
  • Page 36 Wilkommensbildschirm nicht, so “doppelklicken” Sie bitte auf das File ASSETUP. EXE im BIN-Verzeichnis der Support-CD, um die Menüs aufzurufen. Das Setup- Programm soll es Ihnen so leicht wie möglich machen. Es ist menügesteuert, d.h. Sie können in den verschiedenen Untermenüs Ihre Auswahl treffen und die Programme werden dann automatisch installiert.
  • Page 37 être trouvées dans le manuel l’utilisateur qui se trouve sur le CD d’assistance. Les spécifications de la carte mère et le BIOS ayant pu être mis à jour, le contenu de ce manuel est sujet à des changements sans notification.
  • Page 38 / Athlon X2 Dual-Core / Athlon 64 / processeur Sempron - Prise en charge des processeurs sur AM3: Processeur Phenom II X4 / X3 et Athlon II X4 / X3 / X2 d’AMD - Prêt AMD LIVE! - Supporte la technologie Cool ‘n’ Quiet d’AMD...
  • Page 39 - br. 24 connecteur d’alimentation ATX - br. 4 connecteur d’alimentation 12V ATX - Connecteurs audio internes - Connecteur audio panneau avant - 3 x En-tête USB 2.0 (prendre en charge 6 ports USB 2.0 supplémentaires) (voir ATTENTION 7) BIOS - 8Mb BIOS AMI - BIOS AMI - Support du “Plug and Play”...
  • Page 40 64-bit Certifications - FCC, CE, WHQL * Pour de plus amples informations sur les produits, s’il vous plaît visitez notre site web: http://www.asrock.com ATTENTION Il est important que vous réalisiez qu’il y a un certain risque à effectuer l’overclocking, y compris ajuster les réglages du BIOS, appliquer la technologie Untied Overclocking, ou...
  • Page 41 Avant d’installer le disque dur SATAII au connecteur SATAII, veuillez lire le Guide « Installation du disque dur SATAII » à la page 24 du « Manuel de l’utilisateur » qui se trouve sur le CD de support pour régler votre lecteur de disque dur SATAII au mode SATAII.
  • Page 42 Pour améliorer la dissipation de la chaleur, n’oubliez pas de mettre de la pâte thermique entre le CPU le dissipateur lors de l’installation du PC.
  • Page 43 « FERME ». Si aucun capuchon n e r e l i e l e s b r o c h e s , l e c a v a l i e r e s t «...
  • Page 44 (FLOPPY1 br. 33) le côté avec fil rouge côté Broche1 (voir p.2 fig. 23) Note: Assurez-vous que le côté avec fil rouge du câble est bien branché sur le côté Broche1 du connecteur. Connecteur IDE primaire (bleu) (IDE1 br. 39, voir p.2 fig. 8)
  • Page 45 SATA sur le connecteur électrique d’alimentation de l’unité d’alimentation électrique. En-tête USB 2.0 A côté des six ports USB 2.0 par défaut sur le panneau E/S, (USB10_11 br.9) il y a trois embases USB 2.0 (voir p.2 No. 17) sur cette carte mère. Chaque embase USB 2.0 peut prendre...
  • Page 46 1. L’audio à haute définition (HDA) prend en charge la détection de fiche, mais le fil de panneau sur le châssis doit prendre en charge le HDA pour fonctionner correctement. Veuillez suivre les instructions dans notre manuel et le manuel de châssis afin installer votre système.
  • Page 47 (Ventilateur silencieux) ventilateur de CPU à 4 broches , le ventilateur de CPU à 3 broches peut bien fonctionner même sans la fonction de commande de vitesse du ventilateur. Si vous prévoyez de connecter le ventilateur de CPU à 3 broches au connecteur du ventilateur de CPU sur cette carte mère, veuillez le connecter...
  • Page 48 Câble HDMI_SPDIF Veuillez connecter l’extrémité noire (A) du câble HDMI_SPDIF (en option) au collecteur HDMI_SPDIF de la carte-mère. Connectez ensuite l’extrémité blanche (B ou C) du câble HDMI_SPDIF au connecteur HDMI_SPDIF de la carte VGA HDMI. ASRock K10N78D Motherboard...
  • Page 49: Informations Sur Le Cd De Support

    BIOS après le POST, veuillez redémarrer le système en pressant <Ctl> + <Alt> + <Suppr>, ou en pressant le bouton de reset sur le boîtier du système. Vous pouvez également redémarrer en éteignant le système et en le rallumant.
  • Page 50 Grazie per aver scelto una scheda madre ASRock K10N78D, una scheda madre affidabile prodotta secondo i severi criteri di qualità ASRock. Le prestazioni eccellenti e il design robusto si conformano all’impegno di ASRock nella ricerca della qualità e della resistenza. Questa Guida Rapida all’Installazione contiene l’introduzione alla motherboard e la guida passo-passo all’installazione.
  • Page 51 Processore - Supporto per processori Socket AM2+ / AM2: AMD Phenom FX / Phenom / Athlon 64 FX / Athlon 64 X2 Dual-Core / Athlon X2 Dual-Core / Athlon 64 / processore Sempron - Supporto di processori AM3: AMD Phenom...
  • Page 52 Connettori - 6 x connettori SATAII 3.0Go/s, sopporta RAID (RAID 0, RAID 1, RAID 0+1, RAID 5 e JBOD), NCQ, AHCI e “Collegamento a caldo” (vedi ATTENZIONE 6) - 1 x connettori ATA133 IDE (supporta fino a 2 dispositivi IDE)
  • Page 53 * Per ulteriori informazioni, prego visitare il nostro sito internet: http://www.asrock.com AVVISO Si prega di prendere atto che la procedura di overclocking implica dei rischi, come anche la regolazione delle impostazioni del BIOS, l’applicazione della tecnologia Untied Overclocking Technology, oppure l’uso di strumenti di overclocking forniti da terzi. L’overclocking può...
  • Page 54 è una tecnologia rivoluzionaria che consente di realizzare risparmi energetici senza pari. Il regolatore di tensione è in grado di ridurre il numero di fasi in uscita in modo da migliorare l’efficienza quando i nuclei della CPU sono inattivi. In alter parole, permette di realizzare risparmi energetica senza pari e di migliorare l’efficienza energetica senza ridurre le prestazioni del...
  • Page 55 CPU. Tuttavia, non possiamo garantire la stabilità del sistema per tutte le configurazioni CPU/DRAM. Se il sistema è instabile dopo avere abilitato la funzione AM2 Boost, significa che la funzione non è adatta al sistema. Si può scegliere di disabilitare la funzione per mantenere la stabilità...
  • Page 56 Quando il ponticello è posizionato sui pin, il jumper è “CORTOCIRCUITATO”. Se sui pin non ci sono ponticelli, il jumper è “APERTO”. L’illustrazione mostra un jumper a 3 pin in cui il pin1 e il pin2 sono “CORTOCIRCUITATI” quando il ponticello è CORTOCIRCUITATO APERTO posizionato su questi pin.
  • Page 57 (33-pin FLOPPY1) (vedi p.2 item 22) Lato del Pin1 con la striscia rossa Nota: Assicurarsi che il lato del cavo con la striscia rossa sia inserito nel lato Pin1 del connettore. Connettore IDE primario (blu) (39-pin IDE1, vedi p.2 item 8)
  • Page 58 Connettere al gruppo di alimentazione alimentazione SATA al connettore power dell’alimentatore. Collettore USB 2.0 Oltre alle sei porte USB 2.0 predefinite nel pannello I/O, la (9-pin USB10_11) scheda madre dispone di (vedi p.2 No. 17) tre intestazioni USB 2.0. Ciascuna intestazione USB 2.0 supporta due porte USB 2.0.
  • Page 59 1. La caratteristica HDA (High Definition Audio) supporta il rilevamento dei connettori, però il pannello dei cavi sul telaio deve supportare la funzione HDA (High Definition Audio) per far sì che questa operi in modo corretto. Attenersi alle istruzioni del nostro manuale e del manuale del telaio per installare il sistema.
  • Page 60 Sebbene la presente scheda madre disponga di un supporto per ventola CPU a 4 piedini (ventola silenziosa), la ventola CPU a 3 piedini è in grado di funzionare anche senza la funzione di controllo della velocità della ventola. Se si intende collegare la ventola CPU a 3 piedini al connettore della ventola CPU su questa scheda madre, collegarla ai piedini 1-3.
  • Page 61 Cavo HDMI_SPDIF Collegare l’estremità nera (A) del cavo HDMI_SPDIF (opzionale) all’intestazione HDMI_SPDIF sulla scheda madre. Quindi collegare l’estremità bianca (B o C) del cavo HDMI_SPDIF al dini connettore HDMI_SPDIF della scheda HDMI VGA. ASRock K10N78D Motherboard...
  • Page 62 BIOS; altrimenti, POST continua con i suoi test di routine. Per entrare il BIOS Setup dopo il POST, riavvia il sistema premendo <Ctl> + <Alt> + <Delete>, o premi il tasto di reset sullo chassis del sistema. El BIOS Setup Utility es diseñádo “user-friendly”.
  • Page 63 ASRock. Esta Guía rápida de instalación contiene una introducción a la placa base y una guía de instalación paso a paso. Puede encontrar una información más detallada sobre la placa base en el manual de usuario incluido en el CD de soporte.
  • Page 64 Especificación 1 . 2 1 . 2 Especificación Plataforma - Factor forma ATX: 30,5 cm x 19,1 cm, 12,0” x 7,5” - Condensador sólido para alimentación de CPU Procesador - Soporte para procesadores con zócalo AM2+ y AM2: AMD Phenom...
  • Page 65 - 6 x conexiones SATAII, admiten una velocidad de transferencia de datos de hasta 3,0Gb/s, soporta RAID (RAID 0, RAID 1, RAID 0+1, RAID 5 y JBOD), NCQ, AHCI y “Conexión en caliente” (ver ATENCIÓN 6) - 1 x ATA133 conexiones IDE (admite hasta 2 dispositivos IDE) - 1 x puerto Floppy - 1 x En-tête de port COM...
  • Page 66 ADVERTENCIA Tenga en cuenta que hay un cierto riesgo implícito en las operaciones de aumento de la velocidad del reloj, incluido el ajuste del BIOS, aplicando la tecnología de aumento de velocidad liberada o utilizando las herramientas de aumento de velocidad de otros fabricantes.
  • Page 67 ASRock Instant Flash. Ejecute esta herramienta y guarde el archivo correspondiente al sistema BIOS nuevo en su unidad flash USB, unidad de disco flexible o disco duro para poder actualizar el BIOS con sólo pulsar un par de botones, sin necesidad de preparar un disco flexible adicional ni utilizar complicadas utilidades de programación.
  • Page 68 DRAM. Si el sistema se comporta de forma inestable después de habilitar la función AM2 Boost, es posible que dicha función no se pueda aplicar a aquél. Si lo desea, puede deshabilitar la función para mantener la estabilidad del sistema.
  • Page 69 3 para habilitar +5VSB (vea p.2, No. 1) (standby) para PS/2 o USB wake up events. Atención: Para elegir +5VSB, se necesita corriente mas que 2 Amp proveida por la fuente de electricidad. Limpiar CMOS (CLRCMOS1, jumper de 3 pins) (ver p.2, N.
  • Page 70 (vea p.2, No. 22) la banda roja debe quedar en el mismo lado que el contacto 1 Atención: Asegúrese que la banda roja del cable queda situado en el mismo lado que el contacto 1 de la conexión. IDE conector primario (azul) (39-pin IDE1, vea p.2, No.
  • Page 71 Cable de alimentación Conecte el extremo negro del de serie ATA (SATA) cable de SATA al conector de energía de la unidad. A (Opcional) Connettere all’ailmentazione continuación, conecte el dei dischi SATA extremo blanco del cable de Connettere al gruppo di alimentazione alimentación SATA a la...
  • Page 72 2. Si utiliza el panel de sonido AC’97, instálelo en la cabecera de sonido del panel frontal de la siguiente manera: A. Conecte Mic_IN (MIC) a MIC2_L.
  • Page 73 Si pretende enchufar el ventilador de procesador de 3 contactos en el conector del ventilador de procesador de esta placa base, conéctelo al contacto 1-3. Contacto 1-3 conectado Instalación del ventilador de 3 contactos...
  • Page 74 Conecte el extremo negro (A) del cable HDMI_SPDIF en la (Opcional) cabecera HDMI_SPDIF de la placa base. Conecte después el extremo blanco (B o C) del cable HDMI_SPDIF en el conector HDMI_SPDIF de la tarjeta VGA HDMI. A. Extremo negro B.
  • Page 75 Para iniciar la instalación, ponga el CD en el lector de CD y se desplegará el Menú Principal automáticamente si «AUTORUN» está habilitado en su computadora. Si el Menú...
  • Page 76 ASRock K10N78D Motherboard...
  • Page 77 ‘ ’ ® ® ® ASRock K10N78D Motherboard...
  • Page 78 ® ASRock K10N78D Motherboard...
  • Page 79 “ ” ® ® ® ® “ ” “ ” ® ASRock K10N78D Motherboard...
  • Page 80 ® ASRock K10N78D Motherboard...
  • Page 81 “ ” “ ” “ ” “ ” ASRock K10N78D Motherboard...
  • Page 82 SATAII_6 (PORT 5) SATAII_5 (PORT 4) SATAII_4 (PORT 3) SATAII_3 (PORT 2) SATAII_2 (PORT 1) SATAII_1 (PORT 0) ASRock K10N78D Motherboard...
  • Page 83 ASRock K10N78D Motherboard...
  • Page 84 4 3 2 1 ASRock K10N78D Motherboard...
  • Page 85 ASRock K10N78D Motherboard...
  • Page 86 ASRock K10N78D Motherboard...
  • Page 87 “ ” “ ” ASRock K10N78D Motherboard...
  • Page 88 1 0 0 1 0 0 1 0 0 1 0 0 1 0 0 ASRock K10N78D Motherboard...
  • Page 89 ‘ ’ ® ® ® 1 0 1 1 0 1 1 0 1 1 0 1 1 0 1 ASRock K10N78D Motherboard...
  • Page 90 1 0 2 1 0 2 1 0 2 1 0 2 1 0 2 ASRock K10N78D Motherboard...
  • Page 91 ® ® ® “ ” ® ® ® ® ® ® 1 0 3 1 0 3 1 0 3 1 0 3 1 0 3 ASRock K10N78D Motherboard...
  • Page 92 ® ® 1 0 4 1 0 4 1 0 4 1 0 4 1 0 4 ASRock K10N78D Motherboard...
  • Page 93 1 0 5 1 0 5 1 0 5 1 0 5 1 0 5 ASRock K10N78D Motherboard...
  • Page 94 SATAII_6 (PORT 5) SATAII_5 (PORT 4) SATAII_4 (PORT 3) SATAII_3 (PORT 2) SATAII_2 (PORT 1) SATAII_1 (PORT 0) 1 0 6 1 0 6 1 0 6 1 0 6 1 0 6 ASRock K10N78D Motherboard...
  • Page 95 1 0 7 1 0 7 1 0 7 1 0 7 1 0 7 ASRock K10N78D Motherboard...
  • Page 96 4 3 2 1 1 0 8 1 0 8 1 0 8 1 0 8 1 0 8 ASRock K10N78D Motherboard...
  • Page 97 1 0 9 1 0 9 1 0 9 1 0 9 1 0 9 ASRock K10N78D Motherboard...
  • Page 98 1 1 0 1 1 0 1 1 0 1 1 0 1 1 0 ASRock K10N78D Motherboard...
  • Page 99 ® ® 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 ASRock K10N78D Motherboard...
  • Page 100 1 1 2 1 1 2 1 1 2 1 1 2 1 1 2 ASRock K10N78D Motherboard...
  • Page 101 ‘ ’ ™ ® ® ® 1 1 3 1 1 3 1 1 3 1 1 3 1 1 3 ASRock K10N78D Motherboard...
  • Page 102 ® ® 1 1 4 1 1 4 1 1 4 1 1 4 1 1 4 ASRock K10N78D Motherboard...
  • Page 103 ® ® ® ® ® ® ® 1 1 5 1 1 5 1 1 5 1 1 5 1 1 5 ASRock K10N78D Motherboard...
  • Page 104 1 1 6 1 1 6 1 1 6 1 1 6 1 1 6 ASRock K10N78D Motherboard...
  • Page 105 1 1 7 1 1 7 1 1 7 1 1 7 1 1 7 ASRock K10N78D Motherboard...
  • Page 106 SATAII_6 (PORT 5) SATAII_5 (PORT 4) SATAII_4 (PORT 3) SATAII_3 (PORT 2) SATAII_2 (PORT 1) SATAII_1 (PORT 0) 1 1 8 1 1 8 1 1 8 1 1 8 1 1 8 ASRock K10N78D Motherboard...
  • Page 107 1 1 9 1 1 9 1 1 9 1 1 9 1 1 9 ASRock K10N78D Motherboard...
  • Page 108 4 3 2 1 1 2 0 1 2 0 1 2 0 1 2 0 1 2 0 ASRock K10N78D Motherboard...
  • Page 109 1 2 1 1 2 1 1 2 1 1 2 1 1 2 1 ASRock K10N78D Motherboard...
  • Page 110 ® ® 1 2 2 1 2 2 1 2 2 1 2 2 1 2 2 ASRock K10N78D Motherboard...
  • Page 111 1 2 3 1 2 3 1 2 3 1 2 3 1 2 3 ASRock K10N78D Motherboard...

Table of Contents