ASROCK K10N78M PRO Installation Manual
ASROCK K10N78M PRO Installation Manual

ASROCK K10N78M PRO Installation Manual

Hide thumbs Also See for K10N78M PRO:

Advertisement

Quick Links

Copyright Notice:
Copyright Notice:
Copyright Notice:
Copyright Notice:
Copyright Notice:
No part of this installation guide may be reproduced, transcribed, transmitted, or trans-
lated in any language, in any form or by any means, except duplication of documen-
tation by the purchaser for backup purpose, without written consent of ASRock Inc.
Products and corporate names appearing in this guide may or may not be registered
trademarks or copyrights of their respective companies, and are used only for identifica-
tion or explanation and to the owners' benefit, without intent to infringe.
Disclaimer:
Disclaimer:
Disclaimer:
Disclaimer:
Disclaimer:
Specifications and information contained in this guide are furnished for informational
use only and subject to change without notice, and should not be constructed as a
commitment by ASRock. ASRock assumes no responsibility for any errors or omissions
that may appear in this guide.
With respect to the contents of this guide, ASRock does not provide warranty of any kind,
either expressed or implied, including but not limited to the implied warranties or
conditions of merchantability or fitness for a particular purpose. In no event shall
ASRock, its directors, officers, employees, or agents be liable for any indirect, special,
incidental, or consequential damages (including damages for loss of profits, loss of
business, loss of data, interruption of business and the like), even if ASRock has been
advised of the possibility of such damages arising from any defect or error in the guide
or product.
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.
CALIFORNIA, USA ONLY
The Lithium battery adopted on this motherboard contains Perchlorate, a toxic
substance controlled in Perchlorate Best Management Practices (BMP) regulations
passed by the California Legislature. When you discard the Lithium battery in
California, USA, please follow the related regulations in advance.
"Perchlorate Material-special handling may apply, see
www.dtsc.ca.gov/hazardouswaste/perchlorate"
ASRock Website: http://www.asrock.com
Copyright©2009 ASRock INC. All rights reserved.
ASRock
Published July 2009
K10N78M Pro
Motherboard
1 1 1 1 1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the K10N78M PRO and is the answer not in the manual?

Questions and answers

Summary of Contents for ASROCK K10N78M PRO

  • Page 1 ASRock. ASRock assumes no responsibility for any errors or omissions that may appear in this guide. With respect to the contents of this guide, ASRock does not provide warranty of any kind, either expressed or implied, including but not limited to the implied warranties or conditions of merchantability or fitness for a particular purpose.
  • Page 2: Motherboard Layout

    AM2 940-Pin CPU Socket System Panel Header (PANEL1, Orange) CPU Heatsink Retention Module USB 2.0 Header (USB8_9, Blue) 2 x 240-pin DDR2 DIMM Slots USB 2.0 Header (USB6_7, Blue) (Dual Channel: DDRII_1, DDRII_2; Yellow) Infrared Module Header (IR1) CPU Fan Connector (CPU_FAN1)
  • Page 3 VGA/D-Sub Port Microphone (Pink) PS/2 Keyboard Port (Purple) USB 2.0 Ports (USB01) * There are two LED next to the LAN port. Please refer to the table below for the LAN port LED indications. LAN Port LED Indications ACT/LINK SPEED...
  • Page 4: Package Contents

    This Quick Installation Guide contains introduction of the motherboard and step-by- step installation guide. More detailed information of the motherboard can be found in the user manual presented in the Support CD. Because the motherboard specifications and the BIOS software might be updated, the content of this manual will be subject to change without notice.
  • Page 5: Specifications

    - Micro ATX Form Factor: 9.6-in x 7.5-in, 24.4 cm x 19.1 cm - Support for Socket AM2+ / AM2 processors: AMD Phenom FX / Phenom / Athlon 64 FX / Athlon 64 X2 Dual-Core / Athlon X2 Dual-Core / Athlon 64 / Sempron processor...
  • Page 6 - 1 x VGA/DVI-D Port (see CAUTION 7) - 6 x Ready-to-Use USB 2.0 Ports - 1 x RJ-45 LAN Port with LED (ACT/LINK LED and SPEED LED) - HD Audio Jack: Line in / Front Speaker / Microphone Connector - 4 x SATAII 3.0Gb/s connectors, support RAID (RAID 0,...
  • Page 7 Before installing SATAII hard disk to SATAII connector, please read the “SATAII Hard Disk Setup Guide” on page 31 of “User Manual” in the support CD to adjust your SATAII hard disk drive to SATAII mode. You can also connect SATA hard disk to SATAII connector directly.
  • Page 8 MS-DOS or Windows . With this utility, you can press <F6> key during the POST or press <F2> key to BIOS setup menu to access ASRock Instant Flash. Just launch this tool and save the new BIOS file to your USB flash drive, floppy disk or hard drive, then you can update your BIOS only in a few clicks without prepar- ing an additional floppy diskette or other complicated flash utility.
  • Page 9 Vista or Windows Vista * If you need to use CyberLink PowerDVD Ultra version 7.3, we suggest to disable Hardware Acceleration function for better playback performance and compatibility. After executing CyberLink PowerDVD Ultra program, please follow below steps to disable Hardware Acceleration function.
  • Page 10 1 . 4 1 . 4 1 . 4 P P P P P assed 1080p Blu-ray (BD) / HD assed 1080p Blu-ray (BD) / HD assed 1080p Blu-ray (BD) / HD assed 1080p Blu-ray (BD) / HD-D -D -D...
  • Page 11: Pre-Installation Precautions

    Installation Installation Installation This is a Micro ATX form factor (9.6-in x 7.5-in, 24.4 cm x 19.1 cm) motherboard. Before you install the motherboard, study the configuration of your chassis to en- sure that the motherboard fits into it. Pre-installation Precautions...
  • Page 12: Installation Of Cpu Fan And Heatsink

    Step 4. When the CPU is in place, press it firmly on the socket while you push down the socket lever to secure the CPU. The lever clicks on the side tab to indicate that it is locked.
  • Page 13: Installation Of Memory Modules (Dimm)

    Unlock a DIMM slot by pressing the retaining clips outward. Step 2. Align a DIMM on the slot such that the notch on the DIMM matches the break on the slot. The DIMM only fits in one correct orientation. It will cause permanent damage to the motherboard and the DIMM if you force the DIMM into the slot at incorrect orientation.
  • Page 14: Expansion Slots (Pci And Pci Express Slots)

    PCI slots: PCI slots are used to install expansion cards that have the 32-bit PCI interface. PCIE slots: PCIE1 (PCIE x1 slot; White) is used for PCI Express cards with x1 lane width cards, such as Gigabit LAN card, SATA2 card, etc.
  • Page 15: Hybrid Sli

    HybridPower . Currently, NVIDIA Hybrid Technology is only supported with Windows ® Vista OS, and is not available with other OS. Please visit our website for the driver update in the future. ® GeForce Boost ® ® GeForce...
  • Page 16 “Chipset Settings”. Then set the option “Hybrid SLI” to [256MB] or [512MB]. If you want to use onboard VGA output, after step 1 to 3, please follow below steps: A. Set up the BIOS option “Primary Graphics Display” to [Onboard], and save your BIOS change and exit BIOS setup.
  • Page 17 CD to your system. Hybrid SLI driver is in the following path of ASRock support CD: (There are two ASRock support CD in the motherboard gift box pack, please ® choose the one for Windows Vista / Vista 64-bit.)
  • Page 18 CD to your system. Hybrid SLI driver is in the following path of ASRock support CD: (There are two ASRock support CD in the motherboard gift box pack, please ® choose the one for Windows Vista / Vista 64-bit.)
  • Page 19: Dual Monitor And Surround Display Features

    DVI-D and D-sub can drive same or different display contents. To enable dual monitor feature, please follow the below steps: 1. Connect the DVI-D monitor cable to the VGA/DVI-D port on the I/O panel of this motherboard. Connect the D-Sub monitor cable to the VGA/D-Sub port on the I/O panel of this motherboard.
  • Page 20 PCI Express VGA card to PCI Express slot. Please refer to page 14 for proper expansion card installation procedures for details. 2. Connect the DVI-D monitor cable to the VGA/DVI-D port on the I/O panel of this motherboard. Connect the D-Sub monitor cable to the VGA/D-Sub port on the I/O panel of this motherboard.
  • Page 21 A. Click the number ”2” icon. B. Click the items “This is my main monitor” and “Extend the desktop onto this monitor”. C. Click “OK” to save your change. D. Repeat steps A through C for the display icon identified by the number three and four.
  • Page 22: Hdmi Audio Function Operation Guide

    The DVI-D port for the chipset adopted on this motherboard can support DVI/HDCP and HDMI format signal. You may use the DVI to HDMI adapter to convert the DVI-D port to HDMI interface. Please follow below steps to enable HDMI audio function according to the OS you install.
  • Page 23: Jumpers Setup

    After waiting for 15 seconds, use a jumper cap to short pin2 and pin3 on CLRCMOS1 for 5 seconds. However, please do not clear the CMOS right after you update the BIOS.
  • Page 24: Onboard Headers And Connectors

    (33-pin FLOPPY1) (see p.2 No. 22) the red-striped side to Pin1 Note: Make sure the red-striped side of the cable is plugged into Pin1 side of the connector. Primary IDE connector (Blue) (39-pin IDE1, see p.2 No. 8) connect the black end...
  • Page 25 HDA to function correctly. Please follow the instruction in our manual and chassis manual to install your system. 2. If you use AC’97 audio panel, please install it to the front panel audio header as below: A.
  • Page 26 For Windows ® XP / XP 64-bit OS: Please select “Front Mic” as default record device. If you want to hear your voice through front mic, please deselect "Mute" icon in “Front Mic” of “Playback” portion. For Windows ® Vista...
  • Page 27 Though this motherboard provides 4-Pin CPU fan (Quiet Fan) support, the 3-Pin CPU fan still can work successfully even without the fan speed control function. If you plan to connect the 3-Pin CPU fan to the CPU fan connector on this motherboard, please connect it to Pin 1-3.
  • Page 28: Driver Installation Guide

    2 . 1 0 Driver Installation Guide To install the drivers to your system, please insert the support CD to your optical drive first. Then, the drivers compatible to your system can be auto-detected and listed on the support CD driver page. Please follow the order from up to bottom side to install those required drivers.
  • Page 29: Installing Windows

    Untied Overclocking function, please enter “Overclock Mode” option of BIOS setup to set the selection from [Auto] to [CPU, PCIE, Async.]. Therefore, CPU FSB is untied during overclocking, but PCI / PCIE buses are in the fixed mode so that FSB can operate under a more stable overclocking environment.
  • Page 30: Bios Information

    To begin using the Support CD, insert the CD into your CD-ROM drive. It will display the Main Menu automatically if “AUTORUN” is enabled in your computer. If the Main Menu does not appear automatically, locate and double-click on the file “ASSETUP.
  • Page 31 1. Einführung 1. Einführung 1. Einführung Wir danken Ihnen für den Kauf des ASRock K10N78M Pro Motherboard, ein zuverlässiges Produkt, welches unter den ständigen, strengen Qualitätskontrollen von ASRock gefertigt wurde. Es bietet Ihnen exzellente Leistung und robustes Design, gemäß der Verpflichtung von ASRock zu Qualität und Halbarkeit.
  • Page 32: Spezifikationen

    1 . 2 Spezifikationen Spezifikationen Plattform - Micro ATX-Formfaktor: 24.4 cm x 19.1 cm; 9.6 Zoll x 7.5 Zoll - Unterstützung für Socket AM2+ / AM2-Prozessoren: AMD Phenom FX / Phenom / Athlon 64 FX / Athlon 64 X2 Dualkern / Athlon X2 Dualkern / Athlon 64 / Sempron-Prozessor - Unterstützung von AM3-Prozessoren: AMD Phenom...
  • Page 33 - 1 x VGA/D-Sub port - 1 x VGA/DVI-D port (siehe VORSICHT 7) - 6 x Standard-USB 2.0-Anschlüsse - 1 x RJ-45 LAN Port mit LED (ACT/LINK LED und SPEED LED) - Audioanschlüsse: Line In / Line Out / Mikrofon Anschlüsse - 4 x SATAII-Anschlüsse, unterstützt bis 3.0 Gb/s...
  • Page 34 Beachten Sie bitte, dass Overclocking, einschließlich der Einstellung im BIOS, Anwenden der Untied Overclocking-Technologie oder Verwenden von Overclocking-Werkzeugen von Dritten, mit einem gewissen Risiko behaftet ist. Overclocking kann sich nachteilig auf die Stabilität Ihres Systems auswirken oder sogar Komponenten und Geräte Ihres Systems beschädigen.
  • Page 35 1080p Blu-ray (BD)/HD-DVD Playback Unterstützung auf dieser Hauptplatine fordert die passende Hardwarekonfiguration. Bitte verweisen Sie auf Seite 9 und 10 für minimal Hardware Anforderung und die überschritten 1080p Blu-ray (BD)/HD-DVD Filme in unserem Laborversuch. Dieser DVI-D Port für den Chipsatz, der auf dieser Hauptplatine angenommen wird, kann DVI/HDCP und HDMI Format Signal unterstützen.
  • Page 36 Shutdown durch. Bevor Sie das System neu starten, prüfen Sie bitte, ob der CPU-Lüfter am Motherboard richtig funktioniert, und stecken Sie bitte den Stromkabelstecker aus und dann wieder ein. Um die Wärmeableitung zu verbessern, bitte nicht vergessen, etwas Wärmeleitpaste zwischen CPU und Kühlkörper zu sprühen.
  • Page 37: Installation

    2. Installation 2. Installation 2. Installation Dies ist ein Motherboard mit einem Micro ATX-Formfaktor (9,6 Zoll x 7,5 Zoll, 24,4 cm x 19,1 cm). Vor Installation des Motherboards müssen Sie die Konfiguration Ihres Gehäuses dahingehend überprüfen, ob das Motherboard dort hineinpasst.
  • Page 38 2.1 CPU Installation 2.1 CPU Installation Schritt 1: Öffnen Sie den CPU-Sockel, indem sie den Hebel leicht zur Seite und dann nach oben ziehen, auf einen Winkel von 90°. Schritt 2: Positionieren Sie die CPU genau so über dem Sockel, dass sich die Ecke der CPU mit dem goldenen Dreieck exakt über der Ecke des...
  • Page 39 Öffnen Sie einen DIMM-Slot, indem Sie die seitlichen Clips nach außen drücken. Schritt 2: Richten Sie das DIMM-Modul so über dem Slot aus, dass das Modul mit der Kerbe in den Slot passt. Die DIMM-Module passen nur richtig herum eingelegt in die Steckplätze.
  • Page 40: Hybrid Sli

    Gehäuseschacht (Slot) , den Sie nutzen möchten und behalten die Schraube für den Einbau der Karte. Schritt 3: Richten Sie die Karte über dem Slot aus und drücken Sie sie ohne Gewalt hinein, bis sie den Steckplatz korrekt ausfüllt. Schritt 4: Befestigen Sie die Karte mit der Schraube aus Schritt 2.
  • Page 41: Einstellung Der Jumper

    +5VSB (Standby) zu setzen (siehe S.2, Punkt 1) und die PS/2 oder USB- Weckfunktionen zu aktivieren. Hinweis: Um +5VSB nutzen zu können, muss das Netzteil auf dieser Leitung 2A oder mehr leisten können. CMOS löschen (CLRCMOS1, 3-Pin jumper) (siehe S.2, Punkt 14)
  • Page 42 (33-Pin FLOPPY1) die rotgestreifte Seite auf Stift 1 (siehe S.2, Punkt 22) Hinweis: Achten Sie darauf, dass die rotgestreifte Seite des Kabel mit der Stift 1- Seite des Anschlusses verbunden wird. Primärer IDE-Anschluss (blau) (39-pin IDE1, siehe S.2, Punkt 8)
  • Page 43 Serial ATA- (SATA-) Verbinden Sie das schwarze Stromversorgungskabel Ende des SATA-Netzkabels mit dem Netzanschluss am (Option) Laufwerk. Verbinden Sie dann Verbindung zum das weiße Ende des SATA- SATA-HDD-Stromanschluss Stromversorgungskabels mit Verbindung zum Netzteil dem Stromanschluss des Netzteils. USB 2.0-Header Zusätzlich zu den sechs üblichen USB 2.0-Ports an den...
  • Page 44 E. Rufen Sie das BIOS-Setup-Dienstprogramm auf. Wechseln Sie zu Erweiterte Einstellungen und wählen Sie Chipset-Konfiguration. Setzen Sie die Option Frontleistenkontrolle von [Automatisch] auf [Aktiviert]. F. Rufen Sie das Windows-System auf. Klicken Sie auf das Symbol in der Taskleiste unten rechts, um den Realtek HD Audio-Manager aufzurufen. Für Windows ®...
  • Page 45 Obwohl dieses Motherboard einen 24-pol. ATX-Stromanschluss bietet, kann es auch mit einem modifizierten traditionellen 20-pol. ATX-Netzteil verwendet werden. Um ein 20-pol. ATX-Netzteil zu verwenden, stecken Sie den Stecker mit Pin 1 und Pin 13 ein. Installation eines 20-pol. ATX-Netzteils Anschluss für...
  • Page 46: Installation Von Windows

    Anschließend werden die mit Ihrem System kompatiblen Treiber automatisch erkannt und auf dem Bildschirm angezeigt. Zur Installation der nötigen Treiber gehen Sie bitte der Reihe nach von oben nach unten vor. Nur so können die von Ihnen installierten Treiber richtig arbeiten.
  • Page 47 / Vista 64-Bit Betriebssystem auf Ihrem System zu installieren. Wenn die Frage “Wo möchten Sie Windows installieren?” erscheint, legen Sie bitte die ASRock Support CD in Ihr optisches Laufwerk ein. Klicken Sie anschließend die ® “Treiber laden”-Schaltfläche links unten, um die NVIDIA AHCI-Treiber zu ®...
  • Page 48 Wilkommensbildschirm nicht, so “doppelklicken” Sie bitte auf das File ASSETUP. EXE im BIN-Verzeichnis der Support-CD, um die Menüs aufzurufen. Das Setup- Programm soll es Ihnen so leicht wie möglich machen. Es ist menügesteuert, d.h. Sie können in den verschiedenen Untermenüs Ihre Auswahl treffen und die Programme werden dann automatisch installiert.
  • Page 49 être trouvées dans le manuel l’utilisateur qui se trouve sur le CD d’assistance. Les spécifications de la carte mère et le BIOS ayant pu être mis à jour, le contenu de ce manuel est sujet à des changements sans notification.
  • Page 50 / Athlon X2 Dual-Core / Athlon 64 / processeur Sempron - Prise en charge des processeurs sur AM3: Processeur Phenom II X4 / X3 et Athlon II X4 / X3 / X2 d’AMD - Prêt AMD LIVE! - Supporte la technologie Cool ‘n’ Quiet d’AMD...
  • Page 51 - br. 24 connecteur d’alimentation ATX - br. 4 connecteur d’alimentation 12V ATX - Connecteurs audio internes - Connecteur audio panneau avant - 2 x En-tête USB 2.0 (prendre en charge 4 ports USB 2.0 supplémentaires) (voir ATTENTION 9) BIOS - 8Mb BIOS AMI - BIOS AMI - Support du “Plug and Play”...
  • Page 52 64-bit Certifications - FCC, CE, WHQL * Pour de plus amples informations sur les produits, s’il vous plaît visitez notre site web: http://www.asrock.com ATTENTION Il est important que vous réalisiez qu’il y a un certain risque à effectuer l’overclocking, y compris ajuster les réglages du BIOS, appliquer la technologie Untied Overclocking, ou...
  • Page 53 Avant d’installer le disque dur SATAII au connecteur SATAII, veuillez lire le Guide « Installation du disque dur SATAII » à la page 31 du « Manuel de l’utilisateur » qui se trouve sur le CD de support pour régler votre lecteur de disque dur SATAII au mode SATAII.
  • Page 54 Note que a unidade flash USB ou a unidade de disco rígido devem utilizar o sistema de ficheiros FAT32/16/ 13. Même si cette carte mère offre un contrôle sans souci, il n’est pas recommandé d’y appliquer un over clocking. Des fréquences de bus CPU autres que celles recommandées risquent de rendre le système instable...
  • Page 55 2. Installation 2. Installation Il s’agit d’une carte mère à facteur de forme Micro ATX (9,6 po x 7,5 po, 24,4 cm x 19,1 cm). Avant d’installer la carte mère, étudiez la configuration de votre châssis pour vous assurer que la carte mère s’y insère.
  • Page 56 Etape 1. Déverrouillez le support en relevant le levier selon un angle de 90 Etape 2. Placer l’UC directement au-dessus de la prise pour que le coin de l’UC avec son triangle jaune coïncide avec le petit triangle dans le coin de la prise.
  • Page 57 DDR2 DIMM pour activer la technologie Dual Channel Memory. Sinon, le système fonctionnera en mode Canal unique. 1. Il n’est pas permis d’installer de la DDR sur le slot DDR2; la carte mère et les DIMM pourraient être endommagés.
  • Page 58: Installation D'une Carte D'extension

    Slot d’extension (Slots PCI et Slots PCI Express) Slot d’extension (Slots PCI et Slots PCI Express) Il y a 2 ports PCI et 2 ports PCI Express sur la carte mère K10N78M Pro. Slots PCI: Les slots PCI sont utilisés pour installer des cartes d’extension dotées d’une interface PCI 32 bits.
  • Page 59 « FERME ». Si aucun capuchon n e r e l i e l e s b r o c h e s , l e c a v a l i e r e s t «...
  • Page 60 (FLOPPY1 br. 33) le côté avec fil rouge côté Broche1 (voir p.2 fig. 22) Note: Assurez-vous que le côté avec fil rouge du câble est bien branché sur le côté Broche1 du connecteur. Connecteur IDE primaire (bleu) (IDE1 br. 39, voir p.2 fig. 8)
  • Page 61 SATA sur le connecteur électrique d’alimentation de l’unité d’alimentation électrique. En-tête USB 2.0 A côté des six ports USB 2.0 par défaut sur le panneau E/S, (USB8_9 br.9) il y a deux embases USB 2.0 (voir p.2 No. 18) sur cette carte mère. Chaque embase USB 2.0 peut prendre...
  • Page 62 1. L’audio à haute définition (HDA) prend en charge la détection de fiche, mais le fil de panneau sur le châssis doit prendre en charge le HDA pour fonctionner correctement. Veuillez suivre les instructions dans notre manuel et le manuel de châssis afin installer votre système.
  • Page 63 (voir p.2 fig. 6) ien que cette carte mère offre un support de (Ventilateur silencieux) ventilateur de CPU à 4 broches , le ventilateur de CPU à 3 broches peut bien fonctionner même sans la fonction de commande de vitesse du ventilateur.
  • Page 64 Puis, les pilotes compatibles avec votre système peuvent être détectés automatiquement et sont listés sur la page du pilote du CD. Veuillez suivre l’ordre de haut en bas sur le côté pour installer les pilotes requis. En conséquence, les pilotes que vous installez peuvent fonctionner correctement.
  • Page 65 AHCI NVIDIA . Les pilotes AHCI NVIDIA sont sous le chemin suivant du CD Support: (IL y a deux ASRock Support CD dans le paquet de boite de cadeau de la carte mere, ® veuilliez selectionner un pour Windows Vista / Vista 64-bit.)
  • Page 66: Informations Sur Le Cd De Support

    BIOS après le POST, veuillez redémarrer le système en pressant <Ctl> + <Alt> + <Suppr>, ou en pressant le bouton de reset sur le boîtier du système. Vous pouvez également redémarrer en éteignant le système et en le rallumant.
  • Page 67 Grazie per aver scelto una scheda madre ASRock K10N78M Pro, una scheda madre affidabile prodotta secondo i severi criteri di qualità ASRock. Le prestazioni eccellenti e il design robusto si conformano all’impegno di ASRock nella ricerca della qualità e della resistenza. Questa Guida Rapida all’Installazione contiene l’introduzione alla motherboard e la guida passo-passo all’installazione.
  • Page 68 Processore - Supporto per processori Socket AM2+ / AM2: AMD Phenom FX / Phenom / Athlon 64 FX / Athlon 64 X2 Dual-Core / Athlon X2 Dual-Core / Athlon 64 / processore Sempron - Supporto di processori AM3: AMD Phenom...
  • Page 69 - 1 x Porta VGA/D-Sub - 1 x Porta VGA/DVI-D (vedi ATTENZIONE 7) - 6 x Porte USB 2.0 già integrate - 1 x porta LAN RJ-45 con LED (LED azione/collegamento e LED velocità) - Audio Jack: Line In / Line Out / Microfono Connettori - 4 x connettori SATAII 3.0Go/s, sopporta RAID (RAID 0, RAID 1,...
  • Page 70 * Per ulteriori informazioni, prego visitare il nostro sito internet: http://www.asrock.com AVVISO Si prega di prendere atto che la procedura di overclocking implica dei rischi, come anche la regolazione delle impostazioni del BIOS, l’applicazione della tecnologia Untied Overclocking Technology, oppure l’uso di strumenti di overclocking forniti da terzi. L’overclocking può...
  • Page 71 è una tecnologia rivoluzionaria che consente di realizzare risparmi energetici senza pari. Il regolatore di tensione è in grado di ridurre il numero di fasi in uscita in modo da migliorare l’efficienza quando i nuclei della CPU sono inattivi. In alter parole, permette di realizzare risparmi energetica senza pari e di migliorare l’efficienza energetica senza ridurre le prestazioni del...
  • Page 72 BIOS con pochi clic, senza preparare altri dischetti (dischi floppy) o altre complicate utilità Flash. Si prega di notare che l’unità Flash USB o il disco rigido devono usare il File System FAT32/16/ 13. Anche se questa motherboard offre il controllo stepless, non si consiglia di effettuare l’overclocking.
  • Page 73 2. Installazione Questa è una scheda madre con Form Factor Micro ATX (9,6 pollici x 7,5 pollici; 24,4 cm x 19,1 cm). Prima di installare la scheda madre, studiare la configurazione del telaio per assicurarsi che la scheda madre vi si adatti.
  • Page 74 2.1 Installazione del processore Step 1. Aprire lo zoccolo sollevando la leva da un angolo di 90°. Step 2. Posizionare la CPU direttamente sopra la presa in modo tale che l’angolo della CPU con il triangolo dorato corrisponda all’angolo della presa con il triangolino.
  • Page 75 2.3 Installazione dei moduli di memoria (DIMM) La motherboard K10N78M Pro dispone di due slot DIMM DDR2 (Double Data Rate 2) a 240 pin e supporta la tecnologia Dual Channel Memory. Per attivare la configurazione Dual Channel Memory bisogna installare sempre due moduli di memoria identici (stessa marca, velocità, dimensioni e tipo di chip) negli slot DIMM.
  • Page 76 Step 2. Rimuovere i ganci sullo slot che si intende utilizzare. Tenere a portata di mano le viti. Step 3. Allineare il connettore della scheda con lo slot e premere con decisione finché...
  • Page 77 Quando il ponticello è posizionato sui pin, il jumper è “CORTOCIRCUITATO”. Se sui pin non ci sono ponticelli, il jumper è “APERTO”. L’illustrazione mostra un jumper a 3 pin in cui il pin1 e il pin2 sono “CORTOCIRCUITATI” quando il ponticello è CORTOCIRCUITATO APERTO posizionato su questi pin.
  • Page 78 (33-pin FLOPPY1) (vedi p.2 item 22) Lato del Pin1 con la striscia rossa Nota: Assicurarsi che il lato del cavo con la striscia rossa sia inserito nel lato Pin1 del connettore. Connettore IDE primario (blu) (39-pin IDE1, vedi p.2 item 8)
  • Page 79 Connettere al gruppo di alimentazione alimentazione SATA al connettore power dell’alimentatore. Collettore USB 2.0 Oltre alle sei porte USB 2.0 predefinite nel pannello I/O, la (9-pin USB8_9) scheda madre dispone di (vedi p.2 No. 18) due intestazioni USB 2.0. Ciascuna intestazione USB 2.0 supporta due porte USB 2.0.
  • Page 80 1. La caratteristica HDA (High Definition Audio) supporta il rilevamento dei connettori, però il pannello dei cavi sul telaio deve supportare la funzione HDA (High Definition Audio) per far sì che questa operi in modo corretto. Attenersi alle istruzioni del nostro manuale e del manuale del telaio per installare il sistema.
  • Page 81 Sebbene la presente scheda madre disponga di un supporto per ventola CPU a 4 piedini (ventola silenziosa), la ventola CPU a 3 piedini è in grado di funzionare anche senza la funzione di controllo della velocità della ventola. Se si intende collegare la ventola CPU a 3 piedini al connettore della ventola CPU su questa scheda madre, collegarla ai piedini 1-3.
  • Page 82 Quindi, i driver compatibili con il sistema vengono rilevati automaticamente ed elencati nella pagina del driver del CD in dotazione. Per l’installazione dei driver necessari, procedere in base ad un ordine dall’alto verso il basso. In tal modo, i driver installati funzioneranno correttamente.
  • Page 83 64-bit sul sistema. Quando si vede la pagina “Where do you want to install Windows?” (Dove si vuole eseguire l’istallazione di Windows), inserire il CD di supporto ASRock nell’unità ottica e fare clic sul pulsante “Carica driver” , in ®...
  • Page 84 BIOS; altrimenti, POST continua con i suoi test di routine. Per entrare il BIOS Setup dopo il POST, riavvia il sistema premendo <Ctl> + <Alt> + <Delete>, o premi il tasto di reset sullo chassis del sistema. El BIOS Setup Utility es diseñádo “user-friendly”.
  • Page 85 ASRock. Esta Guía rápida de instalación contiene una introducción a la placa base y una guía de instalación paso a paso. Puede encontrar una información más detallada sobre la placa base en el manual de usuario incluido en el CD de soporte.
  • Page 86 1 . 2 1 . 2 Especificación Plataforma - Factor forma Micro ATX: 24,4 cm x 19,1 cm, 9,6” x 7,5” Procesador - Soporte para procesadores con zócalo AM2+ y AM2: AMD Phenom FX, Phenom, Athlon 64 FX, Athlon 64 X2 Dual-Core,...
  • Page 87 - 4 x conexiones SATAII, admiten una velocidad de transferencia de datos de hasta 3,0Gb/s, soporta RAID (RAID 0, RAID 1, RAID 0+1, RAID 5 y JBOD), NCQ, AHCI y “Conexión en caliente” (ver ATENCIÓN 8) - 1 x ATA133 conexiones IDE (admite hasta 2 dispositivos IDE) - 1 x puerto Floppy - 1 x Cabezal de Módulo Infrarrojos...
  • Page 88 ADVERTENCIA Tenga en cuenta que hay un cierto riesgo implícito en las operaciones de aumento de la velocidad del reloj, incluido el ajuste del BIOS, aplicando la tecnología de aumento de velocidad liberada o utilizando las herramientas de aumento de velocidad de otros fabricantes.
  • Page 89 El apoyo de la reproducción de Blu-rayo de 1080p (BD) / HD-DVD en esta placa base requiere la configuración de hardware apropiada. Por favor refieren a la página 9 y 10 para el requisito mínimo de hardware y las películas de Blu-rayo de 1080p (BD) / HD-DVD pasado en nuestra prueba del laboratorio.
  • Page 90 ASRock Instant Flash. Ejecute esta herramienta y guarde el archivo correspondiente al sistema BIOS nuevo en su unidad flash USB, unidad de disco flexible o disco duro para poder actualizar el BIOS con sólo pulsar un par de botones, sin necesidad de preparar un disco flexible adicional ni utilizar complicadas utilidades de programación.
  • Page 91: Instalación

    2. Instalación 2. Instalación Esta placa base tiene un factor de forma Micro ATX (9,6 pulgadas x 7,5 pulgadas, 24,4 cm x 19,1 cm). Antes de instalar la placa base, estudie la configuración de su chasis para asegurarse de que la placa base cabe en él.
  • Page 92: Instalación Del

    Paso 3. Coloque cuidosamente el CPU en el zócalo. El CPU se encaja al zócalo a una sola orientación. No esfuerce el CPU en el zócalo para prevenir encorvados de los pins del CPU. Si no puede encajar el CPU, examine su orientación o examine si los pins están ya...
  • Page 93: Instalación De Memoria

    La placa base K10N78M Pro proporciona dos ranuras DIMM DDR2 (Double Data Rate 2, es decir, Tasa doble de datos) de 240 contactos y es compatible con la Tecnología de memoria de canal dual. Para la configuración de canal dual, siempre es necesario instalar dos módulos de memoria idénticos (la misma marca,...
  • Page 94 Paso 2. Quite la tapa que corresponde a la ranura que desea utilizar. Paso 3. Encaje el conector de la tarjeta a la ranura. Empuje firmemente la tarjeta en la ranura. Paso 4. Asegure la tarjeta con tornillos.
  • Page 95 3 para habilitar +5VSB (vea p.2, No. 1) (standby) para PS/2 o USB wake up events. Atención: Para elegir +5VSB, se necesita corriente mas que 2 Amp proveida por la fuente de electricidad. Limpiar CMOS (CLRCMOS1, jumper de 3 pins) (ver p.2, N.
  • Page 96 (vea p.2, No. 22) la banda roja debe quedar en el mismo lado que el contacto 1 Atención: Asegúrese que la banda roja del cable queda situado en el mismo lado que el contacto 1 de la conexión. IDE conector primario (azul) (39-pin IDE1, vea p.2, No.
  • Page 97 Cable de alimentación Conecte el extremo negro del de serie ATA (SATA) cable de SATA al conector de energía de la unidad. A (Opcional) Connettere all’ailmentazione continuación, conecte el dei dischi SATA extremo blanco del cable de Connettere al gruppo di alimentazione alimentación SATA a la...
  • Page 98 2. Si utiliza el panel de sonido AC’97, instálelo en la cabecera de sonido del panel frontal de la siguiente manera: A. Conecte Mic_IN (MIC) a MIC2_L.
  • Page 99 Si pretende enchufar el ventilador de procesador de 3 contactos en el conector del ventilador de procesador de esta placa base, conéctelo al contacto 1-3. Contacto 1-3 conectado Instalación del ventilador de 3 contactos...
  • Page 100 Guía de instalación del controlador Guía de instalación del controlador Para instalar los controladores en el sistema, inserte en primer lugar el CD de soporte en la unidad óptica. A continuación, se detectarán automáticamente los controladores compatibles con el sistema y se mostrarán en la página de controladores de CD compatibles.
  • Page 101 Los controladores AHCI de NVIDIA se encuentran en la siguiente ruta de nuestro CD de soporte: (Hay dos CD del Apoyo de ASRock en el paquete de la caja del regalo de la placa ® base, por favor elige uno para Windows...
  • Page 102 Para iniciar la instalación, ponga el CD en el lector de CD y se desplegará el Menú Principal automáticamente si «AUTORUN» está habilitado en su computadora. Si el Menú...
  • Page 103 é dotada de um projeto robusto que atende a ASRock de compromisso com a qualidade e durabilidade. Este Guia de Instalação Rápida apresenta a placa-mãe e o guia de instalação passo a passo. Mais informações detalhadas sobre a placa-mãe podem ser encontradas no manual do usuário do CD de suporte.
  • Page 104 1.2 Especificações 1.2 Especificações Plataforma - Formato Micro ATX: 9,6 pol. x 7,5 pol., 24,4 cm x 19,1 cm - Suporte para processadores Socket AM2+ / AM2: Processador AMD Phenom FX / Phenom / Athlon 64 FX / Athlon 64 X2...
  • Page 105 - 1 x porta VGA/DVI-D (veja o AVISO 7) - 6 x portas USB 2.0 padrão - 1 x porta LAN RJ-45 com LED (LED ACT/LIG e LED VELOCIDADE) - HD Áudio Jack: Entrada de linha / Altifalante frontal /...
  • Page 106 AVISO Tenha em atenção que a operação de overclocking envolve alguns riscos, nomeadamente no que diz respeito ao ajuste das definições do BIOS, à aplicação da tecnologia Untied Overclocking ou à utilização de ferramentas de overclocking de terceiros. O overclocking pode afectar a estabilidade do seu sistema ou até...
  • Page 107 Devido às limitações do sistema operativo, o tamanho real da memória pode ser inferior a 4 GB uma vez que uma parte desta está reservada para utilização pelo sistema operativo no âmbito do Windows ® XP e do Windows ®...
  • Page 108 12. ASRock Instant Flash est un utilitaire de flash du BIOS flash intégré dans la ROM Flash. Cet outil pratique de mise à jour du BIOS vous permet de mettre à jour le BIOS du système sans entrer d’abord dans un système d’exploitation tel que MS-DOS ou Windows...
  • Page 109: Precauções Antes Da Instalação

    2. Instalação 2. Instalação K10N78M Pro é uma Micro ATX forma factor (9.6-in x 7.5-in, 24.4 cm x 19.1 cm) tábua principal. Antes de instalar a tábua principal, estude a configuração do seu chassi para assegurar que a tábua principal apropria a isto.
  • Page 110 º passo: insira com cuidado a CPU no soquete até que ela se encaixe no lugar. A CPU somente se encaixa em uma posição correta. NÃO force a CPU no soquete, para evitar que os pinos fiquem tortos.
  • Page 111 DIMM puxando para fora os seus clipes de retenção. Tranque o Nível de º passo: alinhe a DIMM no slot de forma que o entalhe da DIMM fique alinhado com a ranhura no slot. A DIMM somente se encaixa em uma orientação correta.
  • Page 112 2.4 Slots de Expansão (Slots de PCI e PCI Express) 2.4 Slots de Expansão (Slots de PCI e PCI Express) Há 2 slots de PCI e 2 slots de PCI Express na placa–mãe do K10N78M Pro. Slots PCI: Os slots PCI se usam para instalar placas de expansão com uma interface de PCI de 32 bit.
  • Page 113 (veja a folha 2, No. 1) para PS/2 ou eventos de wake up na USB. Nota: Para escolher +5VSB, é preciso uma corrente de stand by de 2 A ou mais. Restaurar CMOS (CLRCMOS1, jumper de 3 pinos) (veja a folha 2, No. 14) Limpar o CMOS Configuração-...
  • Page 114 (veja a folha 2, No. 22) o lado com listras vermelhas para o Pino 1 Nota: Certifique-se de que o lado com listras vermelhas no cabo seja conectado ao lado Pino 1 do conector. Conector primário (Azul) (IDE1 de 39 pinos, veja a folha 2, No. 8)
  • Page 115 Conectores internos de áudio Estes conectores permitem que se receba entrada de (CD1 de 4 pinos) áudio em estéreo de fontes (CD1: veja a floha 2, No. 24) de áudio como CD-ROM, DVD-ROM, placa sintonizadora de TV ou placa MPEG. 1 3 3...
  • Page 116 Siga s instruções que aparecem no manual e no manual do chassis para instalar o sistema. 2. Se utilizar o painel de áudio AC’97, instale-o no cabeçalho de áudio do painel frontal, como a figura abaixo mostra: A. Ligue o Mic_IN (MIC) ao MIC2_L.
  • Page 117 20 pinos. Para usar a fonte de alimentação de 29 pinos, por favor ligue a sua fonte de alimentação com o Pino 1 e o Pino 13. Instalação da Fonte de alimentação ATX de 20 Pinos...
  • Page 118 óptica em primeiro lugar. Depois, os controladores compatíveis com o seu sistema poderão ser detectados automaticamente e surgir na lista na página do controlador do CD de apoio. Por favor, siga a ordem de cima para baixo ao lado para instalar os controladores necessários. Assim, os controladores que instalar poderão funcionar devidamente.
  • Page 119 / Windows Vista de 64 bits nas suas unidades de disco rígido SATA / SATAII sem as funções RAID, siga as etapas a seguir descritas. Use SATA / SATAII HDDs sem NCQ e Hot Plug funções ETAPA 1: Aceda à BIOS.
  • Page 120 Mãe contem: drivers e utilitários necessários para um melhor desempenho da placa Mãe. Para começar a usar o CD de instalação, introduza o CD na leitora de CD-ROM do computador. Automaticamente iniciará o menu principal, casa o “AUTORUN”...
  • Page 121 1 3 9 1 3 9 1 3 9 1 3 9 1 3 9 ASRock K10N78M Pro Motherboard...
  • Page 122 ‘ ’ ® ® ® ® ® 1 4 0 1 4 0 1 4 0 1 4 0 1 4 0 ASRock K10N78M Pro Motherboard...
  • Page 123 1 4 1 1 4 1 1 4 1 1 4 1 1 4 1 ASRock K10N78M Pro Motherboard...
  • Page 124 ® “ ” ® ® ® ® ® 1 4 2 1 4 2 1 4 2 1 4 2 1 4 2 ASRock K10N78M Pro Motherboard...
  • Page 125 “ ” “ ” ® ® 1 4 3 1 4 3 1 4 3 1 4 3 1 4 3 ASRock K10N78M Pro Motherboard...
  • Page 126 1 4 4 1 4 4 1 4 4 1 4 4 1 4 4 ASRock K10N78M Pro Motherboard...
  • Page 127 1 4 5 1 4 5 1 4 5 1 4 5 1 4 5 ASRock K10N78M Pro Motherboard...
  • Page 128 1 4 6 1 4 6 1 4 6 1 4 6 1 4 6 ASRock K10N78M Pro Motherboard...
  • Page 129 ® ® ® ® ® ® ® ® 1 4 7 1 4 7 1 4 7 1 4 7 1 4 7 ASRock K10N78M Pro Motherboard...
  • Page 130 “ ” “ ” “ ” “ ” 1 4 8 1 4 8 1 4 8 1 4 8 1 4 8 ASRock K10N78M Pro Motherboard...
  • Page 131 1 4 9 1 4 9 1 4 9 1 4 9 1 4 9 ASRock K10N78M Pro Motherboard...
  • Page 132 1 5 0 1 5 0 1 5 0 1 5 0 1 5 0 ASRock K10N78M Pro Motherboard...
  • Page 133 ® ® ® ® “ ” “ ” “ ” “ ” ® “ ” “ ” 1 5 1 1 5 1 1 5 1 1 5 1 1 5 1 ASRock K10N78M Pro Motherboard...
  • Page 134 1 5 2 1 5 2 1 5 2 1 5 2 1 5 2 ASRock K10N78M Pro Motherboard...
  • Page 135 ® ® ® ® ® ® ® ® ® ® ® 1 5 3 1 5 3 1 5 3 1 5 3 1 5 3 ASRock K10N78M Pro Motherboard...
  • Page 136 ® ® ® ® ® ® ® ® ® ® ® 1 5 4 1 5 4 1 5 4 1 5 4 1 5 4 ASRock K10N78M Pro Motherboard...
  • Page 137 “ ” “ ” 1 5 5 1 5 5 1 5 5 1 5 5 1 5 5 ASRock K10N78M Pro Motherboard...
  • Page 138 1 5 6 1 5 6 1 5 6 1 5 6 1 5 6 ASRock K10N78M Pro Motherboard...
  • Page 139 ‘ ’ ® ® ® ® ® 1 5 7 1 5 7 1 5 7 1 5 7 1 5 7 ASRock K10N78M Pro Motherboard...
  • Page 140 1 5 8 1 5 8 1 5 8 1 5 8 1 5 8 ASRock K10N78M Pro Motherboard...
  • Page 141 ® ® ® “ ” ® ® ® ® ® 1 5 9 1 5 9 1 5 9 1 5 9 1 5 9 ASRock K10N78M Pro Motherboard...
  • Page 142 ® ® ® ® 1 6 0 1 6 0 1 6 0 1 6 0 1 6 0 ASRock K10N78M Pro Motherboard...
  • Page 143 1 6 1 1 6 1 1 6 1 1 6 1 1 6 1 ASRock K10N78M Pro Motherboard...
  • Page 144 1 6 2 1 6 2 1 6 2 1 6 2 1 6 2 ASRock K10N78M Pro Motherboard...
  • Page 145 1 6 3 1 6 3 1 6 3 1 6 3 1 6 3 ASRock K10N78M Pro Motherboard...
  • Page 146 1 6 4 1 6 4 1 6 4 1 6 4 1 6 4 ASRock K10N78M Pro Motherboard...
  • Page 147 ® ® ® ® ® ® ® ® 1 6 5 1 6 5 1 6 5 1 6 5 1 6 5 ASRock K10N78M Pro Motherboard...
  • Page 148 1 6 6 1 6 6 1 6 6 1 6 6 1 6 6 ASRock K10N78M Pro Motherboard...
  • Page 149 1 6 7 1 6 7 1 6 7 1 6 7 1 6 7 ASRock K10N78M Pro Motherboard...
  • Page 150 ® 1 6 8 1 6 8 1 6 8 1 6 8 1 6 8 ASRock K10N78M Pro Motherboard...
  • Page 151 ® ® ® ® 1 6 9 1 6 9 1 6 9 1 6 9 1 6 9 ASRock K10N78M Pro Motherboard...
  • Page 152 ® ® 1 7 0 1 7 0 1 7 0 1 7 0 1 7 0 ASRock K10N78M Pro Motherboard...
  • Page 153 ® ® ® ® ® ® ® ® ® ® ® 1 7 1 1 7 1 1 7 1 1 7 1 1 7 1 ASRock K10N78M Pro Motherboard...
  • Page 154 ® ® ® ® ® ® 1 7 2 1 7 2 1 7 2 1 7 2 1 7 2 ASRock K10N78M Pro Motherboard...
  • Page 155 ® ® 1 7 3 1 7 3 1 7 3 1 7 3 1 7 3 ASRock K10N78M Pro Motherboard...
  • Page 156 1 7 4 1 7 4 1 7 4 1 7 4 1 7 4 ASRock K10N78M Pro Motherboard...
  • Page 157 ‘ ’ ™ ® ® ® ® ® 1 7 5 1 7 5 1 7 5 1 7 5 1 7 5 ASRock K10N78M Pro Motherboard...
  • Page 158 1 7 6 1 7 6 1 7 6 1 7 6 1 7 6 ASRock K10N78M Pro Motherboard...
  • Page 159 ® ® ® ® ® ® ® 1 7 7 1 7 7 1 7 7 1 7 7 1 7 7 ASRock K10N78M Pro Motherboard...
  • Page 160 ® ® ® 1 7 8 1 7 8 1 7 8 1 7 8 1 7 8 ASRock K10N78M Pro Motherboard...
  • Page 161 1 7 9 1 7 9 1 7 9 1 7 9 1 7 9 ASRock K10N78M Pro Motherboard...
  • Page 162 1 8 0 1 8 0 1 8 0 1 8 0 1 8 0 ASRock K10N78M Pro Motherboard...
  • Page 163 1 8 1 1 8 1 1 8 1 1 8 1 1 8 1 ASRock K10N78M Pro Motherboard...
  • Page 164 ® ® ® ® ® ® ® ® 1 8 2 1 8 2 1 8 2 1 8 2 1 8 2 ASRock K10N78M Pro Motherboard...
  • Page 165 1 8 3 1 8 3 1 8 3 1 8 3 1 8 3 ASRock K10N78M Pro Motherboard...
  • Page 166 1 8 4 1 8 4 1 8 4 1 8 4 1 8 4 ASRock K10N78M Pro Motherboard...
  • Page 167 1 8 5 1 8 5 1 8 5 1 8 5 1 8 5 ASRock K10N78M Pro Motherboard...
  • Page 168 ® ® ® ® 1 8 6 1 8 6 1 8 6 1 8 6 1 8 6 ASRock K10N78M Pro Motherboard...
  • Page 169 1 8 7 1 8 7 1 8 7 1 8 7 1 8 7 ASRock K10N78M Pro Motherboard...
  • Page 170 ® ® ® ® ® ® ® ® ® ® ® ® ® 1 8 8 1 8 8 1 8 8 1 8 8 1 8 8 ASRock K10N78M Pro Motherboard...
  • Page 171 ® ® ® ® ® ® ® ® ® ® ® ® ® ® 1 8 9 1 8 9 1 8 9 1 8 9 1 8 9 ASRock K10N78M Pro Motherboard...
  • Page 172 ® ® 1 9 0 1 9 0 1 9 0 1 9 0 1 9 0 ASRock K10N78M Pro Motherboard...
  • Page 173 1 9 1 1 9 1 1 9 1 1 9 1 1 9 1 ASRock K10N78M Pro Motherboard...
  • Page 174 1 9 2 1 9 2 1 9 2 1 9 2 1 9 2 ASRock K10N78M Pro Motherboard...
  • Page 175 ® ® ® ® ® 1 9 3 1 9 3 1 9 3 1 9 3 1 9 3 ASRock K10N78M Pro Motherboard...
  • Page 176 1 9 4 1 9 4 1 9 4 1 9 4 1 9 4 ASRock K10N78M Pro Motherboard...
  • Page 177 ® ® ® ® ® ® ® 1 9 5 1 9 5 1 9 5 1 9 5 1 9 5 ASRock K10N78M Pro Motherboard...
  • Page 178 ® ® ® 1 9 6 1 9 6 1 9 6 1 9 6 1 9 6 ASRock K10N78M Pro Motherboard...
  • Page 179 1 9 7 1 9 7 1 9 7 1 9 7 1 9 7 ASRock K10N78M Pro Motherboard...
  • Page 180 1 9 8 1 9 8 1 9 8 1 9 8 1 9 8 ASRock K10N78M Pro Motherboard...
  • Page 181 1 9 9 1 9 9 1 9 9 1 9 9 1 9 9 ASRock K10N78M Pro Motherboard...
  • Page 182 ® ® ® ® ® ® ® ® 2 0 0 2 0 0 2 0 0 2 0 0 2 0 0 ASRock K10N78M Pro Motherboard...
  • Page 183 2 0 1 2 0 1 2 0 1 2 0 1 2 0 1 ASRock K10N78M Pro Motherboard...
  • Page 184 2 0 2 2 0 2 2 0 2 2 0 2 2 0 2 ASRock K10N78M Pro Motherboard...
  • Page 185 ® 2 0 3 2 0 3 2 0 3 2 0 3 2 0 3 ASRock K10N78M Pro Motherboard...
  • Page 186 ® ® ® ® 2 0 4 2 0 4 2 0 4 2 0 4 2 0 4 ASRock K10N78M Pro Motherboard...
  • Page 187 2 0 5 2 0 5 2 0 5 2 0 5 2 0 5 ASRock K10N78M Pro Motherboard...
  • Page 188 ® ® ® ® ® ® ® ® ® ® ® ® ® 2 0 6 2 0 6 2 0 6 2 0 6 2 0 6 ASRock K10N78M Pro Motherboard...
  • Page 189 ® ® ® ® ® ® ® ® ® ® ® ® ® ® ® ® ® 2 0 7 2 0 7 2 0 7 2 0 7 2 0 7 ASRock K10N78M Pro Motherboard...
  • Page 190 ® ® ® 2 0 8 2 0 8 2 0 8 2 0 8 2 0 8 ASRock K10N78M Pro Motherboard...

Table of Contents