Page 1
Oven / Light Cook / Time Delay Time Broil Hi/Lo Cancel/ O Lock Controls Hold 3 Seconds Automatic Oven 455-4600 / 455-4601 / 455-4602 INSTALLATION MANUAL To Reduce The Risk Of Injury, User Must Read And Understand Operator’s Manual. Save These Instructions For Future Reference.
TABLE OF CONTENTS SAFETY INFORMATION SAFETY INFORMATION ........3 FOR YOUR SAFETY AND THE SAFETY OF OTHERS, PLEASE READ ALL SAFETY INSTRUCTIONS BEFORE INSTALLING THIS APPLIANCE.
INSTALLATION REQUIREMENTS INSTALLATION REQUIREMENTS (continued) CABINET DIMENSIONS Before beginning the installation process, gather all the required tools and parts. Read and This oven has been designed in accor- follow the instructions as provided. dance with the requirements of UL and CSA Cabinet opening dimensions shown are for International and complies with the maxi- 26"...
INSTALLATION REQUIREMENTS (continued) INSTALLATION REQUIREMENTS (continued) ELECTRICAL REQUIREMENTS ELECTRICAL CONNECTION Cook Options Oven Settings Bake Start Timer On/o Clock To properly install your oven, you must Oven Delay Broil Cancel Cook Hi/Lo Light Time Time ELECTRICAL SHOCK HAZARD Lock Controls Time of Day Hold 3 Seconds Automatic Oven...
INSTALLATION INSTRUCTIONS INSTALLATION INSTRUCTIONS (continued) ANTI-TIP BRACKET OVEN DOOR TIP OVER HAZARD HOW TO REMOVE OVEN DOOR: IMPORTANT: Use both hands to remove oven door(s). • A child or adult can tip the range and be killed. • Make sure the anti-tip bracket has been properly installed 1.
INSTALLATION INSTRUCTIONS (continued) ELECTRICAL CONNECTION LEVEL RANGE ELECTRICAL SHOCK HAZARD HOW TO LEVEL THE RANGE: • Disconnect power before servicing. 1. To level your range, place a level straight across (left to right), on one of the racks inside • Use a new 50 amp power supply cord. your oven.
ELECTRICAL CONNECTION (continued) ELECTRICAL CONNECTION (continued) FOR POWER CORD B. Insert the center (white/neutral) wire The squeeze connector MUST be installed After: Conduit before reinstalling the terminal block cover. INSTALLATION tip through the bottom center terminal A. Remove the 3 lower terminal screws block opening.
Need help?
Do you have a question about the 455-4600 and is the answer not in the manual?
Questions and answers