Table of Contents
Advertisement
The Limited Warranty and the Power Control Guarantee Do Not Apply Unless The
Initial Customer:
1. Has properly connected the Product and the Connected Equipment to properly wired
and grounded outlets (including compliance with electrical and safety codes of the most
current electrical code (ANS/NFPA 70), without the use of any adapters, extension
cords of other connectors.
2. Has provided a suitable and proper environment for use and installation of the
Product and Connected Equipment.
3. Has properly installed and operated the CyberPower Product and Connected
equipment.
4. Has operated the Product at all times within the limitations on the Product's VA
capacity as stated in this User Manual.
CyberPower Does Not Cover or Undertake Any Liability in Any Event for Any of the
Following:
1. Loss of or damage to data, records, or software or the restoration of data or records,
or the reinstallation of software.
2. Damage from causes other than AC Power Line Transients, spikes, or surges on
properly installed, grounded and code-compliant 120 volt power lines in the United
States and Canada; transients, surges or spikes on standard telephone land lines, PBX
telephone equipment lines or ethernet lines, when properly installed and connected.
3. Damage from any circumstance described as excluded above with respect to the
product.
4. Damages from fire, flood, wind, rain, rising water, leakage or breakage of plumbing,
abuse, misuse or alteration of either the product or the Connected Equipment.
Exclusion of Consequential and Other Damages.
The sole and exclusive remedies of the Initial Customer are those provided by the Limited
Warranty and Power Control Guarantee. CyberPower excludes any liability for personal
injury under the Limited Warranty and Power Control Guarantee. CyberPower excludes
any liability for direct, indirect, special, incidental or consequential damages, whether for
damage to or loss of property [EXCEPT FOR (AND ONLY FOR) the specific limited
agreement of CYBERPOWER to provide certain warranty benefits regarding "Connected
Equipment" under the "CYBERPOWER Power Control Guarantee"], loss of profits,
business interruption, loss of information or data. This exclusion applies even though
damage or loss is caused by negligence or other fault. NOTE: Some States or Provinces
do not allow the exclusion or limitation of incidental or consequential damages, so the
above limitation may not apply to you.
DO NOT USE FOR MEDICAL OR LIFE SUPPORT EQUIPMENT OR OTHER HIGH RISK
ACTIVITIES.
CyberPower does not sell the Products for use in high-risk activities. The Product is not
designed or intended for use in hazardous environments requiring fail-safe performance,
including the operation of nuclear facilities, aircraft navigation or communication systems,
air traffic control, weapons systems, life support or medical applications or for use in any
circumstance in which the failure of the Product could lead directly to death, personal
injury, or severe physical or property damage, or that would affect operation or safety of
any medical or life support device (collectively, "High Risk Activities"). CyberPower
expressly disclaims any express or implied warranty of fitness for High Risk Activities.
CyberPower does not authorize use of any of its products use in any High Risk yActivities.
ANY SUCH USE IS IMPROPER AND IS A MISUSE OF A CYBERPOWER PRODUCTS.
The Limited Warranty and the Power Control Guarantee are governed by the laws of the
United States and the State of Minnesota, without reference to conflict of law principles.
Guaranteed Uninterruptible Power
15
UP1200
System
Advertisement
Table of Contents
