Berrcom JXB-183 Instruction Manual page 11

Warning: Portable RF communications equipment (including peripherals such as antenna cables and
external antennas) should be used no closer than 30 cm (12 inches) to any part of the equipment
JXB-183, including cables specified by the manufacturer. Otherwise, degradation of the performance
of this equipment could result.
1， All necessary instructions for maintaining BASIC SAFETY and ESSENTIAL PERFORMANCE with
regard to electromagnetic disturbances for the excepted service life.
Portable and mobile RF communication equipment may affect the performance of the JXB-183,
avoiding strong electromagnetic interference when used, such as near mobile phones, microwave
ovens, etc.
2， Guidance and manufacturer's declaration -electromagnetic emissions and immunity
Guidance and manufacturer's declaration -electromagnetic emissions and immunity
Guidance and manufacturer's declaration - electromagnetic emissions
Emissions test
RF emissions
CISPR 11
RF emissions
CISPR 11
Harmonic emissions
IEC 61000-3-2
Voltage fluctuations/
flicker emissions
IEC 61000-3-3
Guidance and manufacturer's declaration - electromagnetic immunity
Immunity Test
Electrostatic
discharge (ESD)
IEC 61000-4-2
Electrical
transient/burst
Table 1
Table 2
IEC 60601-1-2
Test level
±8 kV contact
±2 kV, ±4 kV, ±8 kV,
±15 kV air
fast
No application
11
Compliance
Group 1
Class B
No aplicación
No aplicación
Compliance level
±8 kV contact
±2 kV, ±4 kV, ±8 kV, ±15
kV air
No application