Remote Control; Preparations; Prepare The Remote Control; Replace The Remote Control Battery - JVC JVB66223 User Manual

3.2 Remote Control

Switch the soundbar between ON and STANDBY mode.
1
Select the play function.
2
+ / －
Increase/decrease the volume level.
3
BASS +
4
Adjust bass level.
BASS －
MOVIE
5 Select (Movie) Equalizer Effect.
6 Select the Bluetooth mode.
/
Skip to previous/next track in Bluetooth/USB mode.
7
Play/pause/resume playback in Bluetooth/USB mode.
/ OK
8
Press and hold to activate the pairing function in
Bluetooth mode or disconnect the existing paired
Bluetooth device.
Mute or resume the sound.
9
Select Equalizer (EQ) Effect.
SOUND
10
MODE
(Voice / Movie / Music / Sport / Night / Custom)
ATMOS Virtual Surround decoder on/off. (SUR ON / SUR OFF)
11

4. Preparations

4.1 Prepare the Remote Control

The provided Remote Control allows the unit to
be operated from a distance.
Even if the Remote Control is operated within
•
the effective range 6 meters, remote control
operation may be impossible if there are any
obstacles between the unit and the remote
control.
If the Remote Control is operated near other
•
products which generate infrared rays, or if
other remote control devices using infra-red
rays are used near the unit, it may operate
incorrectly. Conversely, the other products
may operate incorrectly.

4.2 Replace the Remote Control Battery

1
1 Press and slide the back cover to open the
battery compartment of the remote control.
2
3
1
2
3
4
5
Insert two AAA size batteries (included). Make
2
sure the (+) and (–) ends of the batteries match
the (+) and (–) ends indicated in the battery
compartment.
3 Close the battery compartment cover.

5. Placement and Mounting

5.1 Placement

A If your TV is placed on a table, you can place
the soundbar on the table directly in front of
the TV stand, centered with the TV screen.
B If your TV is attached to a wall, you can
mount the soundbar on the wall directly
below the TV screen.
A
6
7
8
9
10
11
ATMOS
B
5