ASROCK CONROE865GV User Manual page 29

DRAM RAS# Precharge
This controls the idle clocks after a precharge command is issued.
Configuration options: [4 Clocks], [3 Clocks], and [2 Clocks].
DRAM RAS# to CAS# Delay
This controls the latency between the DRAM active command and the
read / write command. Configuration options: [4 Clocks], [3 Clocks],
and [2 Clocks].
DRAM Precharge Delay
This controls the number of DRAM clocks for RAS minimum. Configura-
tion options: [8 Clocks], [7 Clocks], [6 Clocks], and [5 Clocks].
DRAM Burst Length
DRAM Burst length can be set as [8] or [4].
Init. Graphic Adapter Priority
This allows you to select [Onboard], [PCI], or [AGI] as the initial graphics
adapter priority. The default vaule is [PCI].
Internal Graphics Mode Select
This allows you to select the size of share memory for onboard VGA. If
larger size of share memory is selected, onboard VGA will get better
resolution under DOS.
OnBoard LAN
This allows you to enable or disable the "OnBoard LAN" feature.
OnBoard AC'97 Audio
Select [Auto] or [Disabled] for the onboard AC'97 Audio feature.
OnBoard MC'97 Modem
Select [Auto] or [Disabled] for the onboard MC'97 Modem feature.
VCCM Voltage
Use this to select VCCM Voltage. Configuration options: [High], [Low], and
[Auto]. The default value of this feature is [Auto].
VDDQ Voltage
Use this to select VDDQ Voltage. Configuration options: [High], [Low], and
[Auto]. The default value of this feature is [Auto].
2 9 2 9 2 9
2 9 2 9