ASROCK CONROE865GV User Manual page 21

Serial ATA (SATA)
Power Cable
(Optional)
connect to the SATA HDD
power connector
USB 2.0 Header
(9-pin USB67)
(see p.11 No. 18)
Shared USB 2.0 Header
(9-pin USB4_5)
(see p.11 No. 28)
Infrared Module Header
(5-pin IR1)
(see p.11 No. 16)
Internal Audio Connectors
(4-pin CD1, 4-pin AUX1)
(CD1: see p.11 No. 25)
(AUX1: see p.11 No. 24)
Front Panel Audio Header
(8-pin AUDIO1)
(see p.11 No. 22)
Please connect the black end of
SATA power cable to the power
connector on each drive. Then
connect the white end of SATA
power cable to the power
connect to the
power supply
connector of the power supply.
Besides six default USB 2.0
USB_PWR
P-6
ports on the I/O panel, there are
P+6
GND
DUMMY
two USB 2.0 headers on this
motherboard. Each USB 2.0
1
GND
header can support two USB
P+7
P-7
USB_PWR 2.0 ports. The shared USB 2.0
header (USB4_5) is shared with
USB ports 45 on the I/O panel.
1
When using the front panel USB
USB_PWR USB_PWR
P-4
P-5
ports by attaching the front panel
P+4 P+5
GND GND
USB cable to USB4_5 header,
DUMMY
the USB ports 45 on the I/O panel
will not be able to function.
This header supports an
IRTX
+5VSB
DUMMY optional wireless transmitting
and receiving infrared module.
1
GND
IRRX
These connectors allow you
to receive stereo audio input
AUX-L CD-L
GND
GND
from sound sources such as
GND
GND
AUX-R
CD-R
a CD-ROM, DVD-ROM, TV
CD1
AUX1
tuner card, or MPEG card.
This is an interface for front
GND
panel audio cable that allows
BACKOUT-R
BACKOUT-L
convenient connection and
control of audio devices.
1
AUD-OUT-L
GND
AUD-OUT-R
MIC-POWER
MIC
2 1 2 1 2 1
2 1 2 1