Chipset Configuration - ASROCK AM2XLI-ESATA2 User Manual

TRCD
Use this to adjust TRCD values. Configuration options: [Auto], [2CLK], [3CLK],
[4CLK], [5CLK], and [6CLK].
TRRD
Use this to adjust TRRD values. the default value is [Auto].
TRC
Use this to adjust TRC values. The default value is [Auto].
MA Timing
Use this to adjust values for MA timing. Configuration options: [Auto], [2T],
[1T]. The default value is [Auto].
Burst Length
Burst length can be set to 8, 4, or 2 beats.
Bank Interleaving
Interleaving allows memory accesses to be spread out over banks on the
same node, or accross nodes, decreasing access contention.
Memory Hole
Use this to enable or disable memory hole. The default value is [Disabled].
DDRII Initialization Mode
Configuration options: [Auto] and [Compatible]. The default value is [Auto].
3.3.2 3.3.2

Chipset Configuration

Chipset Configuration
3.3.2 3.3.2 Chipset Configuration 3.3.2 Chipset Configuration Chipset Configuration
BIOS SETUP UTILITY
Advanced
Chipset Settings
OnBoard LAN
OnBoard HD Audio
Front Panel Control
Primary Graphics Adapter
CPU - NB Link Speed
CPU - NB Link Width
VCCM Voltage
Chipset Core Voltage
v02.54 (C) Copyright 1985-2003, American Megatrends, Inc.
OnBoard LAN
This allows you to enable or disable the onboard LAN feature.
OnBoard HD Audio
Select [Auto], [Enabled] or [Disabled] for the onboard HD Audio feature. If
you select [Auto], the onboard HD Audio will be disabled when PCI Sound
Card is plugged.
Front Panel Control
Select [Auto], [Enabled] or [Disabled] for the onboard HD Audio Front
Panel.
Enable/Disable
onboard LAN device.
[Enabled]
[Auto]
[Auto]
[PCI]
[Auto]
[Auto]
Select Screen
[Auto] Select Item
+ - Change Option
[Auto]
F1 General Help
F9 Load Defaults
F10 Save and Exit
ESC Exit
4 2 4 2 4 2 4 2 4 2